{"product_id":"basco-dcb1030-drive-shaft-centre-bearing-gwm-cannon-holden-rodeo-ra","title":"Basco DCB1030 Drive Shaft Centre Support Bearing (30mm) - to suit GWM Cannon Ute 2.0L Diesel (2020 - 2025) \u0026 Holden Rodeo RA (2003 - 2008)","description":"\u003ch3\u003eBasco DCB1030 Drive Shaft Centre Support Bearing: GWM Cannon Ute 2.0L Diesel (2020 – 2025) \u0026amp; Holden Rodeo RA (2003 – 2008)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eA replacement drive shaft (tailshaft) centre support bearing for the GWM Cannon Ute 2.0L turbo diesel and selected Holden Rodeo RA utes.\u003c\/strong\u003e It holds the middle of the two-piece rear tailshaft in place under the floor, and soaks up driveline vibration so the shaft runs smooth and quiet. Got a Great Wall V200 or V240? You need the \u003ca href=\"\/products\/basco-dcb1018-drive-shaft-centre-bearing-great-wall-v200-v240-x200-x240\"\u003eBasco DCB1018\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003eIn stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e GWM Ute Cannon (2020 – 2024), Cannon NPW and Cannon Premium NPW (2020 – 2025) 2.0L diesel, and Holden Rodeo RA single cab (2003 – 2008) and dual cab 3.0L diesel (2003 – 2007), see fitment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e centre of the two-piece rear tailshaft (drive shaft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 30 mm bearing bore, 94 mm mounting bolt centres, 100 mm centre height\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange it:\u003c\/strong\u003e when you get a driveline shudder or vibration, a rumble from under the floor, or the rubber is cracked (no fixed interval)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Basco, an Australian family-owned parts specialist\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the Cannon and Rodeo RA:\u003c\/strong\u003e Basco lists DCB1030 for the GW4D20 diesel Cannon and the Rodeo RA models below\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBearing and mount in one:\u003c\/strong\u003e the bearing comes already fitted in its rubber mount and bolt-down bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to OE specifications:\u003c\/strong\u003e Basco says its centre bearings are built to OEM specifications as direct replacements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eBasco DCB1030\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBarcode (EAN)\u003c\/td\u003e\n\u003ctd\u003e9356247012292\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear tailshaft, centre support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing inside diameter\u003c\/td\u003e\n\u003ctd\u003e30 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting bolt centre to centre\u003c\/td\u003e\n\u003ctd\u003e94 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing centre height\u003c\/td\u003e\n\u003ctd\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003e1 bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications as published by Basco for DCB1030.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eEngine\u003c\/th\u003e\n\u003cth\u003eBuilt\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWM Ute Cannon, dual cab ute (wellside)\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo diesel (GW4D20)\u003c\/td\u003e\n\u003ctd\u003e2020 – 2024\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWM Ute Cannon NPW, single cab tray\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo diesel (GW4D20)\u003c\/td\u003e\n\u003ctd\u003e2020 – 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWM Ute Cannon NPW, dual cab ute (wellside)\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo diesel (GW4D20)\u003c\/td\u003e\n\u003ctd\u003e2020 – 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGWM Ute Cannon Premium NPW, single cab tray\u003c\/td\u003e\n\u003ctd\u003e2.0L turbo diesel (GW4D20)\u003c\/td\u003e\n\u003ctd\u003e2020 – 2025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e3.0L turbo diesel (4JH1TC)\u003c\/td\u003e\n\u003ctd\u003e2003 – 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e3.0L turbo diesel (4JJ1-TCX)\u003c\/td\u003e\n\u003ctd\u003e2007 – 2008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e2.4L petrol (C24SE)\u003c\/td\u003e\n\u003ctd\u003e2003 – 2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e2.4L petrol (Y24SE)\u003c\/td\u003e\n\u003ctd\u003e2005 – 2008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e3.5L V6 petrol (6VE1)\u003c\/td\u003e\n\u003ctd\u003e2003 – 2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, single cab utility\u003c\/td\u003e\n\u003ctd\u003e3.6L V6 petrol (LCA \/ H9)\u003c\/td\u003e\n\u003ctd\u003e2005 – 2008\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHolden Rodeo RA, dual cab utility\u003c\/td\u003e\n\u003ctd\u003e3.0L turbo diesel (4JH1TC)\u003c\/td\u003e\n\u003ctd\u003e2003 – 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBasco lists the Cannon as both \"GWM Cannon Ute\" and \"GWM Ute Cannon\". Only fits vehicles with a two-piece tailshaft that has a centre bearing. \u003cstrong\u003eCheck the centre height:\u003c\/strong\u003e DCB1030 has a 100 mm centre height. Some Rodeo and other ute centre bearings use the same 30 mm bore and 94 mm bolt centres but a lower (85 mm) height, so a bearing that looks similar may not sit at the right height. Measure your old one. \u003cstrong\u003eDoesn't suit\u003c\/strong\u003e the Great Wall V200 \/ V240 (see DCB1018). It isn't listed for the Cannon Alpha, the Holden Colorado, or Rodeo RA body styles and engines not shown above.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot 100% sure?\u003c\/strong\u003e Measure your old bearing (30 mm bore, 94 mm bolt centres, 100 mm centre height), or send us your rego or VIN and we'll check it for you before you buy.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Basco DCB1030 drive shaft centre support bearing (bearing fitted in its rubber mount and bracket)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace\u003c\/h3\u003e\n\u003cp\u003eCentre bearings don't have a fixed replacement interval. Replace it when the rubber mount is cracked, perished or torn, the bearing is rough or noisy, or you feel a shudder through the floor when taking off or under load. Water crossings, mud, heavy loads and towing all wear centre bearings faster.\u003c\/p\u003e\n\n\u003ch3\u003eSigns it's worn\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA shudder or vibration through the floor when taking off, especially loaded or towing\u003c\/li\u003e\n\u003cli\u003eA rumble, whine or squeal from under the middle of the vehicle that rises with speed\u003c\/li\u003e\n\u003cli\u003eA clunk when shifting between drive and reverse, or on and off the throttle\u003c\/li\u003e\n\u003cli\u003eCracked, sagging or torn rubber around the bearing, or play in the tailshaft at the centre\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMark the tailshaft halves and flanges before you split them, so they go back in the same phase and balance.\u003c\/li\u003e\n\u003cli\u003eSupport the shaft while you unbolt the centre bearing so it doesn't hang off the universal joints.\u003c\/li\u003e\n\u003cli\u003eA press and the right puller make removing the old bearing from the shaft much easier. If in doubt, a driveline shop can press it on.\u003c\/li\u003e\n\u003cli\u003eOn a lifted Cannon, take-off vibration can come from the tailshaft angle rather than a worn bearing, so check that before you blame the bearing.\u003c\/li\u003e\n\u003cli\u003eTorque the mounting bolts and flange bolts as per your workshop manual, then road test for vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo the full job\u003c\/h3\u003e\n\u003cp\u003eAlso in stock for the GWM Cannon 2.0L diesel:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bem4038-rear-engine-transmission-mount-to-suit-gwm-cannon-haval-h6-tank-300-tank-500-2020-on\"\u003eBasco BEM4038 Rear Engine \/ Transmission Mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/bem4039-engine-mount-left-hand-or-right-hand-side-to-suit-gwm-cannon-ute-2-0l-turbo-diesel-gw4d20-2020-2024\"\u003eBasco BEM4039 Engine Mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Basco?\u003c\/h3\u003e\n\u003cp\u003eBasco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs this the front or rear tailshaft?\u003c\/strong\u003e\u003cbr\u003eIt's the centre support bearing on the two-piece rear tailshaft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it come with the rubber mount and bracket?\u003c\/strong\u003e\u003cbr\u003eYes. The bearing comes already fitted in its rubber mount and bracket, ready to press onto the shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit my Holden Rodeo RA?\u003c\/strong\u003e\u003cbr\u003eBasco lists it for the RA single cab utility with the engines shown in the fitment table, and the RA dual cab with the 3.0L 4JH1TC diesel (2003 – 2007). For any other RA, send us your rego or VIN and we'll check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I check it's the right one?\u003c\/strong\u003e\u003cbr\u003eMeasure your old bearing: 30 mm inside diameter, 94 mm between the mounting bolt centres and 100 mm centre height. Or send us your rego or VIN.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill a non-genuine part void my new-car warranty?\u003c\/strong\u003e\u003cbr\u003eNo, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty, shipping \u0026amp; returns\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer warranty:\u003c\/strong\u003e covered by the Basco manufacturer warranty against manufacturing defects under normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day dispatch:\u003c\/strong\u003e order before 1pm, from our Sunshine Coast QLD warehouse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping:\u003c\/strong\u003e on orders over $160\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day returns:\u003c\/strong\u003e unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment before purchasing. Coo-ee the HOOROO Crew at \u003ca href=\"mailto:sales@hoorooautomotiveparts.com.au\"\u003esales@hoorooautomotiveparts.com.au\u003c\/a\u003e or tap the AiMate live chat if unsure.\u003c\/p\u003e\n","brand":"Basco","offers":[{"title":"Default Title","offer_id":67790694547825,"sku":"DCB1030","price":44.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/9901\/2209\/files\/basco-dcb1030-drive-shaft-centre-bearing-gwm-cannon-holden-rodeo-ra-1.jpg?v=1792322635","url":"https:\/\/hoorooautomotiveparts.com.au\/products\/basco-dcb1030-drive-shaft-centre-bearing-gwm-cannon-holden-rodeo-ra","provider":"HOOROO Automotive Parts","version":"1.0","type":"link"}