{"product_id":"basco-te10021-te10020-outer-tie-rod-end-pair-front-left-right-byd-atto-3-2021-on","title":"Basco TE10021 \u0026 TE10020 Outer Tie Rod End Pair (Front Left \u0026 Right) - to suit BYD Atto 3 Standard \u0026 Extended Range EV (2021 - On)","description":"\u003ch3\u003eBasco TE10021 + TE10020 Outer Tie Rod End Pair (Front Left \u0026amp; Right): BYD Atto 3 EV (2021 – on)\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBoth front outer tie rod ends for the BYD Atto 3 Standard Range and Extended Range electric SUV, in one order.\u003c\/strong\u003e You get the Basco TE10021 front left (passenger side) and the Basco TE10020 front right (driver side), so both sides of the steering are renewed together, ready for a single wheel alignment.\u003c\/p\u003e\n\u003cp\u003eIn stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.\u003c\/p\u003e\n\n\u003ch3\u003eAt a glance\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e BYD Atto 3 Standard Range and Extended Range, 4-door compact SUV, electric (2021 – on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e front left and front right, outer tie rod ends\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e 1 × Basco TE10021 (left) and 1 × Basco TE10020 (right)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChange them:\u003c\/strong\u003e when there's play, a split or leaking boot, or uneven tyre wear (no fixed interval)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Basco, an Australian family-owned parts specialist\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth sides in one box:\u003c\/strong\u003e a matched left and right, so you don't have to order two part numbers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for the Atto 3:\u003c\/strong\u003e Basco lists TE10021 (front left) and TE10020 (front right) specifically for the Atto 3 Standard and Extended\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect replacement:\u003c\/strong\u003e built as direct replacements, so no modification is needed (Basco)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne alignment:\u003c\/strong\u003e doing both sides at once means one wheel alignment afterwards, not two\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eTE10021 (left)\u003c\/th\u003e\n\u003cth\u003eTE10020 (right)\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront left, outer\u003c\/td\u003e\n\u003ctd\u003eFront right, outer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall length\u003c\/td\u003e\n\u003ctd\u003e163 mm\u003c\/td\u003e\n\u003ctd\u003e163 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCone (taper)\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003ctd\u003e12.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread (tie rod)\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003ctd\u003eM14 x 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread (ball stud)\u003c\/td\u003e\n\u003ctd\u003eM12 x 1.25\u003c\/td\u003e\n\u003ctd\u003eM12 x 1.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications as published by Basco for TE10021 and TE10020.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch3\u003eVehicle fitment\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eBody\u003c\/th\u003e\n\u003cth\u003eBuilt\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBYD Atto 3 Standard Range\u003c\/td\u003e\n\u003ctd\u003e4 Door SUV Compact\u003c\/td\u003e\n\u003ctd\u003e2021 – on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBYD Atto 3 Extended Range\u003c\/td\u003e\n\u003ctd\u003e4 Door SUV Compact\u003c\/td\u003e\n\u003ctd\u003e2021 – on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eBoth are battery-electric (no engine code). \u003cstrong\u003eDoesn't suit\u003c\/strong\u003e other BYD models: Basco lists these parts for the Atto 3 only, not the Dolphin, Seal or others.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot 100% sure?\u003c\/strong\u003e Send us your rego or VIN and we'll check it for you before you buy.\u003c\/p\u003e\n\n\u003ch3\u003ePart numbers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/basco-te10021-outer-tie-rod-end-front-left-hand-side-lhs-passenger-side-to-suit-byd-atto-3-standard-extended-range-ev-2021-on\"\u003eBasco TE10021\u003c\/a\u003e: front left outer tie rod end (also sold on its own)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/basco-te10020-outer-tie-rod-end-front-right-hand-side-rhs-driver-side-to-suit-byd-atto-3-standard-extended-range-ev-2021-on\"\u003eBasco TE10020\u003c\/a\u003e: front right outer tie rod end (also sold on its own)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × Basco TE10021 outer tie rod end, front left\u003c\/li\u003e\n\u003cli\u003e1 × Basco TE10020 outer tie rod end, front right\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen to replace\u003c\/h3\u003e\n\u003cp\u003eTie rod ends don't have a fixed replacement interval. Have the steering joints checked at every service and replace a tie rod end if there's free play in the ball joint, the rubber boot is split or leaking grease, or the vehicle fails a roadworthy inspection on steering play.\u003c\/p\u003e\n\u003cp\u003eBoth sides do the same work, so when one is worn the other is often close behind. Replacing them as a pair means one job and one alignment.\u003c\/p\u003e\n\n\u003ch3\u003eSigns they're worn\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKnocking or clunking from the front when steering or driving over bumps\u003c\/li\u003e\n\u003cli\u003eLoose or vague steering, or the car wandering on the road\u003c\/li\u003e\n\u003cli\u003eUneven or rapid wear on the inside or outside edge of the front tyres\u003c\/li\u003e\n\u003cli\u003eA split, torn or greasy rubber boot on a tie rod end\u003c\/li\u003e\n\u003cli\u003ePlay you can feel when a front wheel is rocked side to side (at 9 and 3 o'clock) with the car raised\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo one side at a time so you don't mix up left and right.\u003c\/li\u003e\n\u003cli\u003eBefore removing each old end, count the turns or measure its position on the tie rod so the new one goes back close to the same toe setting.\u003c\/li\u003e\n\u003cli\u003eUse a proper ball joint separator. Don't hammer on the threads or the boot.\u003c\/li\u003e\n\u003cli\u003eTorque the lock nuts and ball stud nuts to the figures in your workshop manual.\u003c\/li\u003e\n\u003cli\u003eGet a \u003cstrong\u003eprofessional wheel alignment\u003c\/strong\u003e straight after fitting, because replacing tie rod ends always changes the toe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDo the full job\u003c\/h3\u003e\n\u003cp\u003eAlso in stock for the BYD Atto 3:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/bj1004-front-lower-control-arm-ball-joint-kit-front-axle-to-suit-byd-atto-3-bev-2021-onwards\"\u003eBasco BJ1004 Front Lower Ball Joint Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/lp10000-front-sway-bar-link-rod-assembly-to-suit-byd-atto-3-1-5l\"\u003eBasco LP10000 Front Sway Bar Link\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wbh1879-wheel-bearing-hub-ass-front-to-suit\"\u003eBasco WBH1879 Front Wheel Bearing Hub\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/db2732-ev-bendix-front-brake-pad-complete-set-front-axle-to-suit-byd-atto3-bev-2021-onwards-and-byd-dolphin-2023-onwards\"\u003eBendix DB2732-EV Front Brake Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy Basco?\u003c\/h3\u003e\n\u003cp\u003eBasco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.\u003c\/p\u003e\n\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhich side is which?\u003c\/strong\u003e\u003cbr\u003eTE10021 is the front left (passenger side on an Australian right-hand drive Atto 3) and TE10020 is the front right (driver's side).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a wheel alignment after fitting?\u003c\/strong\u003e\u003cbr\u003eYes. Replacing tie rod ends changes the toe setting, so book an alignment straight after to protect your tyres.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I buy just one side?\u003c\/strong\u003e\u003cbr\u003eYes: \u003ca href=\"\/products\/basco-te10021-outer-tie-rod-end-front-left-hand-side-lhs-passenger-side-to-suit-byd-atto-3-standard-extended-range-ev-2021-on\"\u003eTE10021 (left)\u003c\/a\u003e and \u003ca href=\"\/products\/basco-te10020-outer-tie-rod-end-front-right-hand-side-rhs-driver-side-to-suit-byd-atto-3-standard-extended-range-ev-2021-on\"\u003eTE10020 (right)\u003c\/a\u003e are also sold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill non-genuine parts void my new-car warranty?\u003c\/strong\u003e\u003cbr\u003eNo, not on their own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty, shipping \u0026amp; returns\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer warranty:\u003c\/strong\u003e covered by the Basco manufacturer warranty against manufacturing defects under normal use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame-day dispatch:\u003c\/strong\u003e order before 1pm, from our Sunshine Coast QLD warehouse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree shipping:\u003c\/strong\u003e on orders over $160\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-day returns:\u003c\/strong\u003e unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our \u003ca href=\"\/policies\/refund-policy\"\u003erefund policy\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eConfirm fitment before purchasing. Coo-ee the HOOROO Crew at \u003ca href=\"mailto:sales@hoorooautomotiveparts.com.au\"\u003esales@hoorooautomotiveparts.com.au\u003c\/a\u003e or tap the AiMate live chat if unsure.\u003c\/p\u003e\n","brand":"Basco","offers":[{"title":"Default Title","offer_id":67779276538225,"sku":"TE10021-TE10020-PAIR","price":51.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1043\/9901\/2209\/files\/basco-te10021-te10020-tie-rod-end-pair-byd-atto-3.png?v=1792242446","url":"https:\/\/hoorooautomotiveparts.com.au\/products\/basco-te10021-te10020-outer-tie-rod-end-pair-front-left-right-byd-atto-3-2021-on","provider":"HOOROO Automotive Parts","version":"1.0","type":"link"}