Haval Jolion Front-End Clunks: Common Causes & Fixes

Basco BCA2368 and BCA2369 front lower control arm pair to suit GWM Haval Jolion

The GWM Haval Jolion is a popular small SUV around Australian towns and suburbs, and it does plenty of school runs, speed bumps and shopping-centre car parks. Over time, all those bumps add up for the front suspension and steering joints. If your Jolion has started knocking, clunking or rattling from the front end, here are the usual suspects and how to narrow it down.

1. Front sway bar links: a knock or rattle over bumps

Sway bar links join the sway bar to the front suspension, with a small ball joint at each end. When those joints wear, they often make a light knock or rattle over speed bumps, gutters and rough roads, especially when only one wheel hits the bump. They're one of the most common sources of front-end noise and one of the simpler fixes.

2. Front lower control arms: clunks on braking, take-off or bumps

The lower control arms locate each front wheel and carry plenty of load. Their rubber bushes and ball joints wear over time. Worn bushes can cause a clunk when braking or pulling away, a knock over bumps, or a vague, wandering feel on the highway.

A wheel alignment is needed after replacing control arms.

3. Outer tie rod ends: clunks when steering

Tie rod ends connect the steering rack to the front wheels. Wear can show up as a clunk when turning at low speed, steering that feels loose, or uneven front tyre wear. As they're part of the steering, any play should be checked promptly, and an alignment is needed after replacement.

4. Engine mount: a thud on take-off

Not every clunk comes from the suspension. If you feel a thud when pulling away or shifting between Drive and Reverse, or extra vibration at idle, a worn engine mount is worth checking.

Got an ABS light as well?

If an ABS or traction control warning light comes on, a common cause on many cars is a faulty wheel speed sensor or damaged sensor wiring, and suspension work can sometimes disturb the wiring. Have the fault codes read first to confirm which sensor it is.

How to narrow it down

  • Note when it happens: over bumps, when turning, when braking, or when pulling away. Each points to different parts.
  • Note where it comes from: front or rear, left or right.
  • Listen with the windows down on a quiet street at low speed.
  • Have it inspected. A mechanic can check for play in each joint with the car safely raised, which is the most reliable way to find the cause.

When one side is worn, the other has usually covered the same kilometres, so many mechanics recommend checking, and often replacing, left and right together.

A quick safety note

Suspension and steering joints keep your wheels where they belong. If a clunk comes with loose steering, pulling to one side or a sudden change in how the car drives, get it checked as soon as possible.

Not sure which part fits your Jolion?

Check the fitment table on each product page, read our How to Check Fitment guide, or just ask us. Send your rego or VIN to sales@hoorooautomotiveparts.com.au or call the HOOROO Crew on (07) 5495 1839, and we'll confirm the right part before you order. Spend $160 or more and shipping is free Australia-wide, applied automatically at checkout.

Find it. Fit it. Fair Dinkum™.
The HOOROO Crew

This article is general information only. Always have your vehicle inspected and repaired by a qualified mechanic.