Basco LP10011 Front Sway Bar Link, Length 318mm - to suit Haval H6 (2016 - 2021) & Honda CR-V RE / RM (2006 - 2017)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco LP10011 Front Sway Bar Link (318mm): Haval H6 & Honda CR-V RE / RM
The 318mm front sway bar (anti-roll bar) link for the Haval H6 2.0L turbo (2016 – 2021) and the 2.4L Honda CR-V RE and RM (2006 – 2017). It connects the front sway bar to the front suspension to keep body roll in check. Don't confuse it with the much shorter rear links for the same vehicles: those are the LP10012 (rear left) and LP10013 (rear right), at 85mm.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Haval H6 2.0L turbo (2016 – 2021) and Honda CR-V RE / RM 2.4L petrol (2006 – 2017), see fitment
- Position: front sway bar link
- Length: 318mm. Measure your old link if you're not sure
- Sold: individually (1 link)
- Change it: when the joints knock or have play, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Long front link: 318mm, the front link for these models. The rear links are a different, much shorter part
- Nuts supplied: comes with its nuts, as pictured
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco LP10011 |
| Position | Front |
| Length | 318mm |
| Quantity | 1 link |
Length as published by Basco for LP10011.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Haval H6 | 4 Door SUV | 2.0L GW4C20 turbo petrol | 2016 – 2021 |
| Honda CR-V RE | 4 Door SUV | 2.4L K24A petrol | 2006 – 2011 |
| Honda CR-V RE | 4 Door SUV | 2.4L K24Z1 petrol | 2006 – 2012 |
| Honda CR-V RM | 4 Door SUV | 2.4L K24Z9 petrol | 2012 – 2017 |
Basco lists one LP10011 part number for these models and doesn't list a separate left or right version. Compare the length (318mm) with your old link before fitting. Doesn't suit the rear (see the LP10012 + LP10013 rear pair), the 2.0L or diesel CR-V, or the later Haval H6 (2021 – on). Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco LP10011 front sway bar link (318mm), with nuts
Sold individually.
When to replace
Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split. Rough roads and towing wear them faster, and when one side is worn the other is often close behind.
Signs it's worn
- Knocking, clunking or rattling from the front over bumps, potholes or speed humps
- More body roll or a loose, wallowy feel in corners
- A split or torn ball joint boot, or grease leaking from it
- Free play in the ball joints when the link is checked by hand with the weight off the bar
Fitting tips
- Fit with the vehicle on its wheels, or with both sides of the front suspension supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
- Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
- Use new nuts and torque them to the figure in your workshop manual.
- Check the front sway bar bushes while you're there and replace them if they're perished.
- A wheel alignment isn't normally needed after replacing sway bar links.
Do the full job
Also in stock for these models:
- Basco LP10012 Rear Left Sway Bar Link
- Basco LP10013 Rear Right Sway Bar Link
- Basco LP10012 + LP10013 Rear Sway Bar Link Pair
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the front or rear link?
Front. LP10011 is the 318mm front link. The rear links for the same vehicles are LP10012 (left) and LP10013 (right).
How long is it?
318mm. Measure your old link if you're not sure you have the right one.
Does it fit the diesel CR-V?
Basco lists it for the 2.4L petrol CR-V RE and RM only.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.