Basco BCA1299 Front Right Upper Control Arm (RHS Driver Side) - to suit Nissan Navara D23 / NP300 2.3L Twin Turbo Diesel (2020 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA1299 Front Right Upper Control Arm: Nissan Navara D23 / NP300
The front right upper control arm for the Nissan Navara D23 / NP300 with the 2.3L YS23DDTT twin-turbo diesel, supplied with the ball joint fitted. It holds the top of the front right wheel hub and, with the lower arm, sets the wheel's camber and caster, so it keeps your steering, tyre wear and wheel alignment where they should be. In Australia the front right is the driver side. Need the other side? The front left is the Basco BCA1231, or get both sides together in the BCA1231 + BCA1299 pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Nissan Navara D23 / NP300 2.3L twin-turbo diesel (2020 – on), SL, ST and ST-X incl. King Cab, see fitment
- Position: front right upper control arm (RHS, driver side)
- Ball joint: fitted, 15mm cone, M14 x 1.5 thread
- Partner part: Basco BCA1231 (front left)
- Change it: when the ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Ball joint fitted: the arm comes with its ball joint and bushes already in place, so there's no pressing parts in or out
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Protective coating: a powder-coated finish to resist corrosion from road grime and weather
- Side-specific: left and right are separate part numbers. Order BCA1299 for the front right
Specifications
| Part number | Basco BCA1299 |
| Position | Front right upper (RHS, driver side) |
| Ball joint | Fitted |
| Ball joint cone diameter | 15mm |
| Ball joint thread | M14 x 1.5 |
| Length | 334mm |
| Ball joint offset | 171.5mm from the outside of the front bush |
| Quantity | 1 control arm |
Specifications as published for Basco BCA1299.
Check your old arm: Basco specifies this arm with the ball joint 171.5mm from the outside of the front bush. Measure your old arm before ordering. If yours is different, send us your VIN or rego and we'll find the right arm.
Vehicle fitment
Basco lists this arm for the models below. Years are model build years as Basco lists them.
| Model | Body | Engine | Built |
|---|---|---|---|
| Nissan Navara D23 / NP300 | 4 Door Ute, Dual Cab, Wellside | 2.3L YS23DDTT (M9T) twin-turbo diesel | 2020 – on |
| Nissan Navara SL D23 / NP300 | 2 Door Ute, Single Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL King Cab D23 / NP300 | 4 Door Ute, King Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL King Cab D23 / NP300 | 4 Door Ute, King Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST D23 / NP300 | 4 Door Ute, Dual Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST, ST-X D23 / NP300 | 4 Door Ute, Dual Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST, ST-X King Cab D23 / NP300 | 4 Door Ute, King Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
Doesn't suit the front left (that's Basco BCA1231), the Navara D40, D23 models built before 2020, D23 models with the single-turbo 2.3L YS23DDT, 2.5L YD25 diesel or 2.5L QR25DE petrol engines, or the lower or rear arms. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco BCA1299 front right upper control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with this arm. Need both sides? The BCA1231 + BCA1299 pair includes BCA1231 and BCA1299, or add the front left Basco BCA1231 on its own.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joint and bushes checked at every service, and replace the arm when the ball joint has play or a split boot, or the bushes are cracked or perished.
Signs it's worn
- Knocking or clunking from the front over bumps, speed humps or rough roads
- Vague or wandering steering, or the car pulling to one side
- Uneven or rapid wear on the inside or outside edge of the front tyre
- A split ball joint boot, or a cracked and perished bush
Fitting tips
- Tighten the bush bolts with the suspension at ride height, so the bushes aren't pre-loaded and don't tear.
- The upper arm sets caster and camber, so get a wheel alignment after fitting.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
- Check the other control arms, tie rod ends and sway bar links while you're there.
Do the full job
Also in stock for these models:
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right arm?
BCA1299 is the front right (driver side in Australia). The front left is Basco BCA1231.
Does it come with the ball joint?
Yes. The ball joint comes fitted to the arm. Basco doesn't list any mounting bolts or nuts in the box.
Should I replace both sides?
It's a good idea if the car has done big kilometres, because both arms do the same work and wear at a similar rate. The BCA1231 + BCA1299 pair saves $9.95 compared with buying both sides separately. If only one side is worn or damaged, replacing that side is fine.
Does it fit the single-turbo Navara?
Basco lists this arm only for the D23 / NP300 with the 2.3L YS23DDTT twin-turbo diesel, built 2020 – on. Send us your VIN if you're not sure which engine you have.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.