Basco BJ1014 Front Lower Ball Joint (Left or Right) - to suit Toyota Corolla, Celica, Prius, RAV4 ACA20/21 & Allex (1995 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BJ1014 Front Lower Ball Joint: Toyota Corolla, Celica, Prius & RAV4
The front lower ball joint for a wide range of Toyotas, including the Corolla (AE110 to the current MZEA12 and hybrid), Celica ZZT230 / ZZT231, Prius and RAV4 ACA20 / ACA21. It's the pivot between the lower control arm and the steering knuckle. It's a bolt-on ball joint with a flange, and the same part fits the left or right side.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota Corolla (1995 – on), Celica ZZT230 / 231, Allex, Prius (2000 – 2022) and RAV4 ACA20 / 21 (2000 – 2005), see fitment
- Position: front lower ball joint, fits left or right
- Includes: ball joint, castle nut and split pin, as pictured
- Sold: individually. Order 2 for both sides
- Change it: when it has play, knocks, or its boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Fits either side: one part number for the front left and front right
- Bolt-on flange: bolts to the knuckle, as pictured
- Fitting hardware included: comes with a castle nut and split pin
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco BJ1014 |
| Position | Front lower, left or right |
| Quantity | 1 ball joint with castle nut and split pin |
Specifications as published by Basco for BJ1014.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Toyota Corolla AE110R, EE111R (incl. Levin FZ) | Sedan & coupe | 1.3L 4EFE, 1.5L 5AFE petrol | 1995 – 2000 |
| Toyota Corolla AE112R (incl. Sportivo) | Sedan & liftback | 1.8L 7AFE petrol | 1997 – 2002 |
| Toyota Corolla ZZE122R / ZZE123R (incl. Ascent, Conquest, Seca, Sportivo) | Hatch, sedan & wagon | 1.8L 1ZZFE / 2ZZGE petrol | 2001 – 2007 |
| Toyota Corolla RunX, Fielder, Spacio, Luxel ZZE122R – ZZE124R | Hatch, sedan & wagon | 1.8L 1ZZFE / 2ZZGE petrol | 2000 – 2007 |
| Toyota Corolla Altis ZZE121R | Sedan | 1.6L 3ZZFE petrol | 2001 – 2006 |
| Toyota Corolla Hybrid ZWE211R (incl. Sport Hybrid) | Hatch, sedan & wagon | 1.8L 2ZRFXE hybrid | 2018 – 2022 |
| Toyota Corolla MZEA12R | Hatch & sedan | 2.0L M20AFKS petrol | 2018 – on |
| Toyota Celica ZZT230R / ZZT231R (incl. SX, ZR) | Liftback | 1.8L 1ZZFE / 2ZZGE petrol | 1999 – 2006 |
| Toyota Allex ZZE122R – ZZE124R | Hatch | 1.8L 1ZZFE / 2ZZGE petrol | 2001 – 2006 |
| Toyota Prius NHW11R | Sedan | 1.5L 1NZFXE hybrid | 2000 – 2003 |
| Toyota Prius NHW20R | Hatch | 1.5L 1NZFXE hybrid | 2003 – 2011 |
| Toyota Prius ZVW30R / ZVW35R | Hatch | 1.8L 2ZRFXE hybrid | 2009 – 2016 |
| Toyota Prius ZVW50R | Hatch | 1.8L 2ZRFXE hybrid | 2015 – 2022 |
| Toyota RAV4 ACA20R / ACA21R | 2 & 4 Door SUV | 2.0L 1AZFE / 1AZFSE petrol | 2000 – 2005 |
Doesn't suit the upper position, or the Corolla ZRE models (2007 – 2018) and RAV4 from 2006. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco BJ1014 front lower ball joint
- 1 × castle nut
- 1 × split pin
Sold individually. Replacing both sides? Add 2 to your cart.
When to replace
Ball joints don't have a fixed replacement interval. Have them checked at every service and replace a ball joint when it has play, knocks, or its rubber boot is split and the grease has washed out. Rough roads and heavy loads wear them faster.
Signs it's worn
- Knocking or clunking from the front over bumps or when turning
- Vague or wandering steering
- Uneven wear on the inside or outside edge of the front tyres
- A split ball joint boot, or play in the joint when the wheel is levered up and down
Fitting tips
- Support the control arm and knuckle so nothing is bent or stretched while the joint is out.
- Torque the mounting bolts to the figure in your workshop manual.
- Get a wheel alignment after replacing front ball joints.
- Check the other ball joints, tie rod ends and rack ends while you're there.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right ball joint?
Either. BJ1014 fits the front left and the front right.
Does it fit the current Corolla?
Basco lists it for the Corolla MZEA12 (2018 – on) and the Corolla Hybrid ZWE211 (2018 – 2022).
Does it fit the 2007 – 2018 Corolla?
No. Basco doesn't list it for the ZRE Corolla.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.