Basco BJ1018 front right lower ball joint, part of the BJ1019 & BJ1018 pair

Basco BJ1018 Front Right Lower Ball Joint (RHS) - to suit MG MG4 Excite, Essence & XPower (2023 - On)

$63.95 AUD
Skip to product information
Basco BJ1018 front right lower ball joint, part of the BJ1019 & BJ1018 pair

Basco BJ1018 Front Right Lower Ball Joint (RHS) - to suit MG MG4 Excite, Essence & XPower (2023 - On)

$63.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco BJ1018 Front Right Lower Ball Joint (RHS): MG MG4 (2023 – on)

The front right (RHS) lower ball joint for the MG MG4 Excite, Essence, Essence Long Range and XPower EV (2023 – on). It's the pivot between the lower control arm and the steering knuckle on the driver's side (right-hand drive). Basco's reseller lists BJ1018 as front right lower; the matching left side is a different part number (BJ1019).

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: MG MG4 Excite, Essence, Essence Long Range and XPower (2023 – on), see fitment
  • Position: front right (RHS) lower ball joint
  • Includes: ball joint with nut, as pictured
  • Sold: individually (1 ball joint). Pair with BJ1019 for the left
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Side-specific right-hand joint: Basco's reseller lists BJ1018 for the front right lower position
  • Nut supplied: comes with its nut, as pictured
  • Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco BJ1018
Position Front right (RHS) lower
Quantity 1 ball joint with nut

Side and position as published by Basco's reseller for BJ1018. Kit contents from Basco's product photo.

Vehicle fitment

Basco lists this part for the models below. Years are model build years as Basco lists them.

Model Body / series Engine Built
MG MG4 Essence Long Range 4 Door Hatchback EV E0 2023 – on
MG MG4 Excite 4 Door Hatchback EV E0 2023 – on
MG MG4 Excite / Essence 4 Door Hatchback EV E0 2023 – on
MG MG4 XPower 4 Door Hatchback EV E0 2023 – on

Doesn't suit the front left (that's Basco BJ1019), or other MG models. Basco doesn't list BJ1018 for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco BJ1018 front right lower ball joint, with nut as pictured

Sold individually. Doing both sides? You'll also need the left-hand BJ1019.

When to replace

Ball joints don't have a fixed replacement interval. Have them checked at every service and replace a ball joint when it has play, knocks, or its rubber boot is split and the grease has washed out. Rough roads and heavy loads wear them faster.

Signs it's worn

  • Knocking or clunking from the front over bumps or when turning
  • Vague or wandering steering
  • Uneven wear on the inside or outside edge of the front tyres
  • A split ball joint boot, or play in the joint when the wheel is levered up and down

Fitting tips

  • Support the control arm and knuckle so nothing is bent or stretched while the joint is out.
  • Hold the stud with the hex in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
  • Torque the nut to the figure in your workshop manual.
  • Get a wheel alignment after replacing front ball joints.
  • Check the other ball joints, tie rod ends and rack ends while you're there.

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right?
Right (RHS). BJ1018 is the front right lower ball joint. The left is Basco BJ1019.

Does it fit the MG4 XPower?
Yes. Basco lists the XPower as well as the Excite and Essence.

Do I need a wheel alignment?
Yes. Get one after replacing a front ball joint.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like