Basco BJ9510 Front Lower Ball Joint (Left or Right) - to suit Toyota Hilux KUN & GGN (2005 - 2017) & Fortuner GUN156 (2015 - 2020)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BJ9510 Front Lower Ball Joint: Toyota Hilux & Fortuner
The front lower ball joint for the Toyota Hilux KUN and GGN series (2005 – 2017) and Fortuner GUN156 (2015 – 2020). It's the pivot between the lower control arm and the steering knuckle, carrying the weight of the front of the vehicle while letting the wheel steer and move up and down. The same ball joint fits the left or right side.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota Hilux KUN16, KUN26, KUN25, GGN15, GGN25 (2005 – 2015), GGN120 / GGN125 (2015 – 2017) and Fortuner GUN156 (2015 – 2020), see fitment
- Position: front lower ball joint, fits left or right
- Includes: ball joint, circlip, nut and split pin
- Sold: individually. Order 2 for both sides
- Change it: when it has play, knocks, or its boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Fits either side: one part number for the front left and front right
- Fitting hardware included: comes with a circlip, castle nut and split pin
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco BJ9510 |
| Position | Front lower, left or right |
| Quantity | 1 ball joint with circlip, nut and split pin |
Specifications as published by Basco for BJ9510.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Toyota Fortuner GX, GXL, Crusade GUN156R | 4 Door SUV | 2.8L 1GDFTV turbo diesel | 2015 – 2020 |
| Toyota Hilux SR, Workmate KUN16R (2WD) | Single, Extra & Dual Cab | 3.0L 1KDFTV turbo diesel | 2005 – 2015 |
| Toyota Hilux SR, Workmate KUN26R (4WD) | Single, Extra & Dual Cab | 3.0L 1KDFTV turbo diesel | 2005 – 2015 |
| Toyota Hilux KUN25R | Dual Cab | 2.5L 2KDFTV turbo diesel | 2005 – 2015 |
| Toyota Hilux SR GGN15R (2WD) | Single, Extra & Dual Cab | 4.0L 1GRFE V6 petrol | 2005 – 2015 |
| Toyota Hilux SR GGN25R (4WD) | Single & Dual Cab | 4.0L 1GRFE V6 petrol | 2005 – 2014 |
| Toyota Hilux SR GGN120R, GGN125R | Dual Cab | 4.0L 1GRFE V6 petrol | 2015 – 2017 |
Doesn't suit the upper ball joints, the Hilux built before 2005, or the 2015 – on Hilux GUN models. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco BJ9510 front lower ball joint
- 1 × circlip
- 1 × nut
- 1 × split pin
Sold individually. Replacing both sides? Add 2 to your cart.
When to replace
Ball joints don't have a fixed replacement interval. Have them checked at every service and replace a ball joint when it has play, knocks, or its rubber boot is split and the grease has washed out. Off-road use, towing and heavy loads wear them faster.
Signs it's worn
- Knocking or clunking from the front over bumps or when turning
- Vague or wandering steering
- Uneven wear on the inside or outside edge of the front tyres
- A split ball joint boot, or play in the joint when the wheel is levered up and down
Fitting tips
- Use a ball joint press and the correct adaptors, and support the control arm so it isn't bent.
- Seat the circlip fully in its groove.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit the new split pin. Don't back the nut off to line it up.
- Get a wheel alignment after replacing front ball joints.
- Check the other ball joints, tie rod ends and rack ends while you're there.
Do the full job
Also in stock for the Hilux:
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right ball joint?
Either. BJ9510 fits the front left and the front right.
Is it the upper or lower ball joint?
Lower. BJ9510 is the front lower ball joint.
Does it fit the 2015 – on Hilux?
Basco lists it for the 2015 – 2017 Hilux GGN120 / GGN125 4.0L V6 and the 2015 – 2020 Fortuner GUN156. It isn't listed for the 2015 – on Hilux GUN diesel models.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.