Basco BOS1002 Pre-Cat Oxygen / Lambda Sensor (Upstream, Front) - to suit GWM Haval H6, Haval H6 HEV & Haval H9 2.0L Petrol (2016 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BOS1002 Pre-Catalytic (Upstream) Oxygen / Lambda Sensor: GWM Haval H6, H6 HEV & H9 2.0L
The pre-cat (upstream, front) oxygen (lambda) sensor for the GWM Haval H6 2.0L, H6 HEV and Haval H9 2.0L. It's the pre-cat (upstream, front) sensor, screwed into the exhaust manifold / front pipe before the catalytic converter. It reads the oxygen in the exhaust so the engine computer can keep the fuel mixture right. Need the other one too? The post-cat (downstream, rear) sensor is Basco BOS1003, or get both together in the BOS1002 + BOS1003 Front & Rear O2 Sensor Set.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: GWM Haval H6 2.0L (2016 – 2025), Haval H6 HEV (2021 – 2025) and Haval H9 2.0L (2018 – on), see fitment
- Position: pre-catalytic converter / exhaust manifold (upstream, front sensor)
- Not the post-cat (downstream, rear) sensor: that's Basco BOS1003
- Change it: when it's diagnosed faulty, usually with a check engine light and an oxygen sensor fault code (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Made for the Haval H6 and H9: Basco lists BOS1002 as the pre-cat (upstream, front) oxygen sensor for the Haval H6 2.0L (GW4C20 and GW4N20), H6 HEV and Haval H9 2.0L
- Plug-in replacement: comes with its lead and connector fitted, so it plugs straight into the factory harness
- Right sensor, right spot: BOS1002 is the upstream (pre-cat) sensor and BOS1003 is the downstream (post-cat) sensor. They aren't interchangeable
- Keeps the engine running clean: a healthy sensor helps fuel economy and emissions and protects the catalytic converter
Specifications
| Part number | Basco BOS1002 |
| Type | Oxygen / lambda sensor |
| Position | pre-catalytic converter / exhaust manifold (upstream, front sensor) |
| Engine | GWM 2.0L petrol, GW4C20 and GW4N20, I4 16V DOHC VVT |
| Quantity | 1 sensor |
Part details as published by Basco for BOS1002.
Vehicle fitment
| Model | Body | Built | Engine |
|---|---|---|---|
| GWM Haval H6 (3rd gen) | 4 Door SUV Compact | 2021 – 2025 | 2.0L turbo petrol (GW4N20), I4 16V DOHC VVT |
| GWM Haval H6 HEV (hybrid) | 4 Door SUV Compact | 2021 – 2025 | 2.0L (GW4N20) hybrid |
| Haval H6 (2nd gen) | 4 Door SUV Compact | 2016 – 2021 | 2.0L turbo petrol (GW4C20), I4 16V DOHC VVT |
| Haval H9 | 4 Door SUV Full-Size | 2018 – on | 2.0L turbo petrol (GW4C20), I4 16V DOHC VVT |
Fitment is from the Basco Australian catalogue via our supplier. Doesn't suit the post-cat (downstream, rear) sensor position (that's BOS1003), the Haval H6 1.5L turbo, Jolion, H2 or diesel engines. Basco doesn't list it for those. Basco lists the H6 HEV with the 2.0L GW4N20, so if your hybrid is a 1.5L, check with us first.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco BOS1002 pre-cat (upstream, front) oxygen sensor with lead and connector
When to replace
Oxygen sensors don't have a fixed replacement interval. Replace it when it's diagnosed faulty (usually a check engine light with a sensor fault code), or as preventive maintenance at high kilometres. The pre-cat sensor runs hotter and controls the fuel mixture directly, so it's usually the first to wear.
Signs it's worn
- Check engine light on, often with an oxygen sensor fault code (for example P0130 – P0141 range)
- Higher fuel use than normal
- Rough or hunting idle, hesitation or flat spots
- A failed emissions test, or a rotten-egg smell from the exhaust
Fitting tips
- Work on a cold exhaust. The sensor and pipes get extremely hot.
- Unplug the connector first, then undo the sensor with an oxygen sensor socket (slotted for the lead).
- A little penetrating oil on a seized sensor helps. Don't force a stuck sensor and strip the thread.
- If the new thread isn't pre-coated, use a small amount of sensor-safe anti-seize on the threads only, never on the tip.
- Tighten to the torque in your workshop manual, route the lead away from the exhaust and moving parts, and clip the connector back in place.
- Clear the fault codes after fitting and take it for a drive so the engine computer can relearn.
Do the full job
Also in stock for the Haval H6 and H9 2.0L:
- Basco BOS1003 Post-cat (downstream, rear) Oxygen Sensor
- Basco BOS1002 + BOS1003 Front & Rear O2 Sensor Set
- Basco RCG1004 Rocker Cover Gasket Set
- Basco WP9303 Engine Water Pump
- Basco BFF-2301 In-line Fuel Filter
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the front or rear oxygen sensor?
The front. BOS1002 is the pre-cat (upstream) sensor before the catalytic converter. The rear, post-cat (downstream) sensor is BOS1003.
Should I replace both sensors?
Not always. Replace the one your fault code points to. If the car has done big kilometres, or you're doing one anyway, the front & rear set saves you money over two singles.
Does it fit the Haval H6 1.5L or Jolion?
No. Basco lists BOS1002 for the 2.0L engines only. Send us your rego or VIN and we'll find the right part.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your vehicle serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.