Basco DCB1018 Drive Shaft Centre Support Bearing (30mm) - to suit Great Wall V200, V240, X200 & X240 (2009 - 2016)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco DCB1018 Drive Shaft Centre Support Bearing: Great Wall V200, V240, X200 & X240 (2009 – 2016)
A replacement drive shaft (tailshaft) centre support bearing for the Great Wall V200 and V240 utes and X200 and X240 SUVs. It holds the middle of the two-piece rear tailshaft in place under the floor, and soaks up driveline vibration so the shaft runs smooth and quiet.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Great Wall V200, V240, X200 and X240 (2009 – 2016), also sold GWM-badged, see fitment
- Position: centre of the two-piece rear tailshaft (drive shaft)
- Size: 30 mm bearing bore, 94 mm mounting bolt centres, 85 mm centre height
- Change it: when you get a driveline shudder or vibration, a rumble from under the floor, or the rubber is cracked (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Precision bearing: Basco says it's engineered for smooth running and long life
- Heavy-duty seals: built to keep dirt and water out at high revolutions
- Built to OE specifications: Basco says its centre bearings are built to OEM specifications as direct replacements
- Bearing and mount in one: the bearing comes already fitted in its rubber mount and bracket
Specifications
| Part number | Basco DCB1018 |
| Position | Rear tailshaft, centre support |
| Bearing inside diameter | 30 mm |
| Mounting bolt centre to centre | 94 mm |
| Bearing centre height | 85 mm |
| Quantity | 1 bearing |
Specifications as published by Basco for DCB1018.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Great Wall V200 K2, single cab chassis | 2.0L turbo diesel (GW4D20) | 2012 – 2016 |
| Great Wall V200 K2, dual cab chassis | 2.0L turbo diesel (GW4D20) | 2012 – 2016 |
| Great Wall V200 K2, dual cab ute (wellside) | 2.0L turbo diesel (GW4D20) | 2011 – 2016 |
| Great Wall V240 K2, single cab chassis | 2.4L petrol (4G69S4N) | 2010 – 2016 |
| Great Wall V240 Super Luxury K2, dual cab ute (wellside) | 2.4L petrol (4G69S4N) | 2009 – 2016 |
| Great Wall X200 CC, mid-size SUV | 2.0L turbo diesel (GW4D20) | 2011 – 2016 |
| Great Wall X240 CC, mid-size SUV | 2.4L petrol (4G69S4N) | 2009 – 2016 |
Basco also lists the GWM-badged V200 and V240. Only fits vehicles with a two-piece tailshaft that has a centre bearing. Doesn't suit the SA220, or the newer GWM Cannon (2020 – on).
Not 100% sure? Measure your old bearing (30 mm bore, 94 mm bolt centres), or send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco DCB1018 drive shaft centre support bearing (bearing fitted in its rubber mount and bracket)
When to replace
Centre bearings don't have a fixed replacement interval. Replace it when the rubber mount is cracked, perished or torn, the bearing is rough or noisy, or you feel a shudder through the floor when taking off or under load. Water crossings, mud and heavy towing all wear centre bearings faster.
Signs it's worn
- A shudder or vibration through the floor when taking off, especially loaded or towing
- A rumble, whine or squeal from under the middle of the vehicle that rises with speed
- A clunk when shifting between drive and reverse, or on and off the throttle
- Cracked, sagging or torn rubber around the bearing, or play in the tailshaft at the centre
Fitting tips
- Mark the tailshaft halves and flanges before you split them, so they go back in the same phase and balance.
- Support the shaft while you unbolt the centre bearing so it doesn't hang off the universal joints.
- A press and the right puller make removing the old bearing from the shaft much easier. If in doubt, a driveline shop can press it on.
- Torque the mounting bolts and flange bolts as per your workshop manual, then road test for vibration.
Do the full job
Also in stock for the Great Wall V200, V240, X200 and X240:
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the front or rear tailshaft?
It's the centre support bearing on the two-piece rear tailshaft.
Does it come with the rubber mount and bracket?
Yes. The bearing comes already fitted in its rubber mount and bracket, ready to press onto the shaft.
Does it fit the GWM-badged V200 or V240?
Yes. Basco lists the GWM-badged V200 and V240 as well as the Great Wall-badged models.
How do I check it's the right one?
Measure your old bearing: 30 mm inside diameter, 94 mm between the mounting bolt centres and 85 mm centre height. Or send us your rego or VIN.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.