Basco LP10004 Front Sway Bar Link (Left or Right) - to suit Honda Civic FC, FK & FL incl. Type R & e:HEV (2016 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco LP10004 Front Sway Bar Link: Honda Civic FC, FK & FL (2016 – on)
The front sway bar (anti-roll bar) link for the 10th and 11th generation Honda Civic, including the Type R and e:HEV. It connects the front sway bar to the front suspension to keep body roll in check. The same link fits the left or right side (Basco's reseller notes 2 are needed to do both sides), and it's sold individually.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Honda Civic FC sedan (2016 – on), FK hatch (2017 – on), FL (2021 – on), Type R FK8 and FL5, and e:HEV, see fitment
- Position: front sway bar link, fits left or right
- Length: 345mm
- Sold: individually (1 link). Order 2 for both front sides
- Change it: when the joints knock or have play, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Fits either side: one part number for front left and front right
- Nuts supplied: comes with its nuts, as pictured
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco LP10004 |
| Position | Front, left or right |
| Thread size | M10 x 1.25 |
| Length | 345mm |
| Quantity | 1 link (sold individually) |
Thread size and length as published by Basco's reseller for LP10004.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Honda Civic VTi, VTi-S FC | 4 Door Sedan | 1.8L R18Z1 petrol | 2016 – on |
| Honda Civic RS, VTi-L, VTi-LX FC | 4 Door Sedan | 1.5L L15B7 turbo petrol | 2016 – 2021 |
| Honda Civic VTi, VTi-S FK | Hatch | 1.8L R18Z1 petrol | 2017 – on |
| Honda Civic FK | Hatch | 1.5L L15C turbo petrol | 2017 – 2021 |
| Honda Civic RS, VTi-L, VTi-LX FK | Hatch | 1.5L L15B7 turbo petrol | 2021 – 2024 |
| Honda Civic Type R FK | Hatch | 2.0L K20C1 turbo petrol | 2017 – 2022 |
| Honda Civic Type R FL | Hatch | 2.0L K20C1 turbo petrol | 2022 – on |
| Honda Civic e:HEV L, LX FL | As Basco lists (FL) | 2.0L LFC hybrid | 2022 – on |
Doesn't suit the rear of the vehicle, or the Civic built before 2016 (FB, FD, FK2). Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco LP10004 front sway bar link, with nuts
Sold individually. Replacing both front links? Add 2 to your cart.
When to replace
Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split. Rough roads and towing wear them faster, and when one side is worn the other is often close behind.
Signs it's worn
- Knocking, clunking or rattling from the front over bumps, potholes or speed humps
- More body roll or a loose, wallowy feel in corners
- A split or torn ball joint boot, or grease leaking from it
- Free play in the ball joints when the link is checked by hand with the weight off the bar
Fitting tips
- Fit with the vehicle on its wheels, or with both sides of the front suspension supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
- Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
- Use new nuts and torque them to the figure in your workshop manual.
- Check the front sway bar bushes while you're there and replace them if they're perished.
- A wheel alignment isn't normally needed after replacing sway bar links.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right link?
Either. LP10004 fits the front left and the front right.
How many do I need?
It's sold individually. Order 2 to replace both front links.
Does it fit the Civic Type R?
Yes. Basco lists it for the Type R FK8 (2017 – 2022) and FL5 (2022 – on).
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.