Basco LP10008 Front Right Sway Bar Link (RHS Driver Side) - to suit LDV T60 (2017 - On), D90 (2017 - On) & eT60 (2022 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco LP10008 Front Right Sway Bar Link: LDV T60, D90 & eT60
The front right sway bar (anti-roll bar) link for the LDV T60 ute (2017 – on), D90 SUV (2017 – on) and eT60 electric ute (2022 – on). It connects the front sway bar to the front suspension to keep body roll in check. In Australia the front right is the driver side. Need the other side? The front left is the Basco LP10007, or get both together in the LP10007 + LP10008 pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: LDV T60 ute (2017 – on), D90 SUV (2017 – on) and eT60 electric ute (2022 – on), see fitment
- Position: front right sway bar link (RHS, driver side)
- Partner part: Basco LP10007 (front left)
- Change it: when the joints knock or have play, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Side-specific: left and right are separate part numbers. Order LP10008 for the front right
- Nuts supplied: comes with its nuts, as pictured
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco LP10008 |
| Position | Front right (RHS, driver side) |
| Thread size | M10 x 1.25 |
| Quantity | 1 link |
Fitment as published by Basco. Thread size and side as published by Basco's reseller for LP10008.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| LDV D90 | 4 Door SUV | 2.0L 20L4E petrol | 2017 – 2024 |
| LDV D90 / D90 Executive | 4 Door SUV | 2.0L 20A4E petrol | 2024 – on |
| LDV D90 Executive D20 SV9A | 4 Door SUV | 2.0L SC20M (D20) diesel | 2020 – on |
| LDV eT60 | 4 Door Ute, Dual Cab | Electric | 2022 – on |
| LDV T60 | 2 Door Single Cab Chassis | 2.8L SC28R150Q5 diesel | 2018 – 2020 |
| LDV T60 Pro, Luxe, Trailrider | 4 Door Ute, Dual Cab | 2.8L SC28R150Q5 diesel | 2017 – 2021 |
| LDV T60 Trailrider 2 | 4 Door Ute, Dual Cab | 2.0L SC20M163 (D20) diesel | 2020 – 2021 |
| LDV T60 | 4 Door Ute, Dual Cab | 2.0L SC20M218 (D20) diesel | 2021 – on |
Doesn't suit the rear sway bar, or other LDV models such as the G10, Deliver 9 or MIFA. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco LP10008 front right sway bar link, with nuts
Need both sides? The LP10007 + LP10008 pair includes both, or add the front left Basco LP10007 on its own.
When to replace
Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split. Rough roads and towing wear them faster, and when one side is worn the other is often close behind.
Signs it's worn
- Knocking, clunking or rattling from the front over bumps, potholes or speed humps
- More body roll or a loose, wallowy feel in corners
- A split or torn ball joint boot, or grease leaking from it
- Free play in the ball joints when the link is checked by hand with the weight off the bar
Fitting tips
- Fit with the vehicle on its wheels, or with both sides of the front suspension supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
- Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
- Use new nuts and torque them to the figure in your workshop manual.
- Check the front sway bar bushes while you're there and replace them if they're perished.
- A wheel alignment isn't normally needed after replacing sway bar links.
Do the full job
Also in stock for these models:
- Basco LP10007 Front Left Sway Bar Link
- Basco LP10007 + LP10008 Front Sway Bar Link Pair
- Basco BCA1102 + BCA1114 Front Upper Control Arm Pair (LDV T60)
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right link?
Right. Basco's reseller lists LP10008 as the front right link. The front left is LP10007.
Is it for the front or the rear?
Front. LP10008 is a front sway bar link.
Does it fit the eT60?
Yes. Basco lists it for the LDV eT60 electric dual cab ute, 2022 – on.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.