Basco LP10014 front sway bar link with nuts, fits left or right, to suit Suzuki Jimny

Basco LP10014 Front Sway Bar Link (Left or Right) - to suit Suzuki Jimny SN413 (1998 - 2019), Jimny GJ & Sierra (2018 - On) & Jimny XL (2023 - On)

$27.95 AUD
Skip to product information
Basco LP10014 front sway bar link with nuts, fits left or right, to suit Suzuki Jimny

Basco LP10014 Front Sway Bar Link (Left or Right) - to suit Suzuki Jimny SN413 (1998 - 2019), Jimny GJ & Sierra (2018 - On) & Jimny XL (2023 - On)

$27.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco LP10014 Front Sway Bar Link: Suzuki Jimny (1998 – on)

The front sway bar (anti-roll bar) link for the Suzuki Jimny SN413, the current Jimny GJ and Sierra, and the 5-door Jimny XL. It connects the front sway bar to the front axle to keep body roll in check. The same link fits the left or right side, and it's sold individually, so order two to do both sides.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Suzuki Jimny SN413 (1998 – 2019), Jimny GJ and Sierra (2018 – on) and Jimny XL (2023 – on), see fitment
  • Position: front sway bar link, fits left or right
  • Sold: individually (1 link). Order 2 for both front sides
  • Change it: when the joints knock or have play, or a boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Fits either side: one part number for front left and front right, so there's no mixing up sides
  • Nuts supplied: comes with its nuts, as pictured
  • Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco LP10014
Position Front, left or right
Thread size M10 x 1.25
Length 93mm
Quantity 1 link (sold individually)

Specifications as published for Basco LP10014.

Vehicle fitment

Basco lists this part for the models below. Years are model build years as Basco lists them.

Model Body / series Engine Built
Suzuki Jimny JX, JLX SN413 2 Door SUV 1.3L G13BB petrol 1998 – 2000
Suzuki Jimny JLX SN413 2 Door Convertible 1.3L G13BB petrol 2000 – 2002
Suzuki Jimny SN413 2 Door SUV 1.3L M13A petrol 2000 – 2005
Suzuki Jimny SN413 2 Door SUV 1.3L M13AA petrol 2005 – 2019
Suzuki Jimny GJ 2 Door SUV 1.5L K15B petrol 2018 – on
Suzuki Jimny Sierra 2 Door SUV 1.5L K15B petrol 2018 – on
Suzuki Jimny XL 4 Door SUV 1.5L K15B petrol 2023 – on

Doesn't suit the rear of the vehicle, or Jimny models built before 1998. Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco LP10014 front sway bar link, with nuts

Sold individually. Replacing both front links? Add 2 to your cart.

When to replace

Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split. Rough roads and towing wear them faster, and when one side is worn the other is often close behind.

Signs it's worn

  • Knocking, clunking or rattling from the front over bumps, potholes or speed humps
  • More body roll or a loose, wallowy feel in corners
  • A split or torn ball joint boot, or grease leaking from it
  • Free play in the ball joints when the link is checked by hand with the weight off the bar

Fitting tips

  • Fit with the vehicle on its wheels, or with both sides of the front suspension supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
  • Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
  • Use new nuts and torque them to the figure in your workshop manual.
  • Check the front sway bar bushes while you're there and replace them if they're perished.
  • A wheel alignment isn't normally needed after replacing sway bar links.

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right link?
Either. LP10014 fits the front left and the front right.

How many do I need?
It's sold individually. Order 2 to replace both front links.

Does it fit the new 5-door Jimny XL?
Yes. Basco lists it for the Jimny XL (2023 – on) as well as the 3-door GJ and Sierra.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like