Basco TE10001 Left Outer Tie Rod End (LHS) - to suit Toyota C-HR, Corolla Hybrid, Corolla Cross Hybrid & Prius ZVW50 (2015 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE10001 Left Outer Tie Rod End (LHS): Toyota C-HR, Corolla Hybrid, Corolla Cross Hybrid & Prius
The left outer tie rod end for the Toyota C-HR (2016 – 2023), Corolla Hybrid ZWE211 / ZWE219 hatch and sedan (2018 – on), Corolla Cross Hybrid 2.0L (2022 – on) and Prius ZVW50 (2015 – 2022). It joins the inner rack end to the steering knuckle, so it carries every steering input to the front left wheel. Basco's resellers list TE10001 as the outer, left hand side, with Basco TE10002 as the matching right. In Australia the left is the passenger side.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota C-HR, Corolla Hybrid hatch & sedan, Corolla Cross Hybrid 2.0L and Prius ZVW50, see fitment
- Position: left outer tie rod end (LHS, passenger side)
- Partner part: Basco TE10002 (right outer)
- Length: 166mm
- Sold: individually. This is the left side only
- Change it: when it has play or knocks, or its boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Side-specific: left and right are separate part numbers. Order TE10001 for the left
- Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco TE10001 |
| Position | Left outer (LHS, passenger side) |
| Cone size | 13.5mm |
| Internal thread | M16 x 1.5 |
| Ball joint thread | M12 x 1.25 |
| Length | 166mm |
| Quantity | 1 tie rod end |
Fitment and specifications as published by Basco. Side as published by Basco's resellers for TE10001.
Vehicle fitment
Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Toyota C-HR NGX10R / NGX50R | 4 Door SUV | 1.2L 8NR-FTS turbo petrol | 2017 – 2023 |
| Toyota C-HR Hybrid ZYX10R | 4 Door SUV | 1.8L 2ZR-FXE hybrid | 2016 – 2023 |
| Toyota Corolla Hybrid ZWE211R | 4 Door Hatch | 1.8L 2ZR-FXE hybrid | 2018 – 2022 |
| Toyota Corolla Hybrid ZWE211R | 4 Door Sedan | 1.8L 2ZR-FXE hybrid | 2019 – 2022 |
| Toyota Corolla Hybrid ZWE219R | 4 Door Hatch & Sedan | 1.8L 2ZR-FXE hybrid | 2022 – on |
| Toyota Corolla Sport Hybrid ZWE211R | 4 Door Hatch | 1.8L 2ZR-FXE hybrid | 2018 – 2020 |
| Toyota Corolla Cross Hybrid MXGA10R / MXGA15R | 4 Door SUV | 2.0L M20A-FXS hybrid | 2022 – on |
| Toyota Prius Hybrid ZVW50R | 4 Door Hatch | 1.8L 2ZR-FXE hybrid | 2015 – 2022 |
Not listed for the Corolla wagon (ZWE211 / ZWE219), the Corolla Cross 1.8L petrol ZSG10 or 1.8L hybrid ZVG11 / ZVG15, the C-HR ZYX11R, the Prius ZVW51R, or the non-hybrid Corolla ZRE / MZEA. Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco TE10001 left outer tie rod end, as pictured
Sold individually. This is the left side only. Need the right as well? Add the Basco TE10002 right outer tie rod end.
When to replace
Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.
Signs it's worn
- Play or a clunk in the steering, especially over bumps or when turning
- Wandering on the highway or the vehicle pulling to one side
- Uneven wear on the inside or outside edge of the front tyres
- A split tie rod end boot, or play in the joint when it's checked by hand
Fitting tips
- Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
- Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
- Get a wheel alignment after replacing a tie rod end.
Do the full job
Also in stock for these models:
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right?
Left. Basco's resellers list TE10001 as the outer, left hand side. In Australia that's the passenger side. The right is TE10002.
Is this the inner or the outer tie rod?
Outer. TE10001 is the outer tie rod end that bolts to the steering knuckle.
Does it fit the Corolla Cross?
The Corolla Cross Hybrid 2.0L MXGA10 / MXGA15 (2022 – on), yes. The 1.8L petrol and 1.8L hybrid Corolla Cross aren't confirmed, so check with us first.
Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.