Basco TE10028 & TE10029 Outer Tie Rod End Pair (Left & Right) - to suit Suzuki Swift FZ 1.4L (2011 - 2017) & Swift Sport FZ (2012 - 2017)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE10028 + TE10029 Outer Tie Rod End Pair (Left & Right): Suzuki Swift FZ & Swift Sport FZ
Both outer tie rod ends for the Suzuki Swift FZ 1.4L (2011 – 2017) and Swift Sport FZ 1.6L (2012 – 2017), in one order. You get the Basco TE10028 left outer and TE10029 right outer, so both sides are renewed together.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Suzuki Swift FZ 1.4L (2011 – 2017) and Swift Sport FZ 1.6L (2012 – 2017), see fitment
- Position: left and right outer tie rod ends
- Includes: 1 × Basco TE10028 (left, passenger side) and 1 × Basco TE10029 (right, driver side), each with castle nut and split pin
- Change them: when they have play or knock, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Castle nuts and split pins supplied: as pictured
- Better value: saves $9.95 compared with buying both sides separately
Specifications
| Part numbers | Basco TE10028 (left outer), Basco TE10029 (right outer) |
| Length | 190mm |
| Cone size | 13.1mm |
| Threads | M14 x 1.5 and M12 x 1.25 |
| Quantity | 2 tie rod ends (1 left, 1 right), each with castle nut and split pin |
Basco's catalogue shows the same fitment for TE10028 and TE10029. Basco's resellers list TE10028 as the left outer and TE10029 as the right outer.
Vehicle fitment
Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Suzuki Swift FZ (GA, GL, GLX) | 4 Door Hatch | 1.4L K14B petrol | 2011 – 2017 |
| Suzuki Swift Sport FZ | 4 Door Hatch | 1.6L M16A petrol | 2012 – 2017 |
Not listed for the Swift FZ 1.3L DDiS diesel, the earlier Swift RS / EZ (2005 – 2010) or the later Swift AZ (2017 – on). Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco TE10028: left outer tie rod end (also sold on its own)
- Basco TE10029: right outer tie rod end (also sold on its own)
What's in the box
- 1 × Basco TE10028 left outer tie rod end, with castle nut and split pin
- 1 × Basco TE10029 right outer tie rod end, with castle nut and split pin
When to replace
Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.
Signs they're worn
- Play or a clunk in the steering, especially over bumps or when turning
- Wandering on the highway or the vehicle pulling to one side
- Uneven wear on the inside or outside edge of the front tyres
- A split tie rod end boot, or play in the joint when it's checked by hand
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
- Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
- Get a wheel alignment after replacing a tie rod end.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two outer tie rod ends: Basco TE10028 (left) and TE10029 (right).
Can I buy just one side?
Yes. TE10028 (left) and TE10029 (right) are also sold separately.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.