Basco WBH1671 Rear Wheel Bearing Hub Pair (Left & Right) - to suit Genesis G70 (2019 - On) & Kia Stinger (2017 - 2023) without Brembo Brakes
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco WBH1671 Rear Wheel Bearing Hub Assembly Pair (x2): Genesis G70 & Kia Stinger
Both rear wheel bearing and hub assemblies for the Genesis G70 (IK) and Kia Stinger (CK), with 2.0L turbo four or 3.3L twin-turbo V6, on vehicles without Brembo brakes, in one order. You get 2 × Basco WBH1671, one for the rear left and one for the rear right, so both sides are renewed together. Each is a complete bolt-in unit with the bearing, splined hub and wheel studs all in one. Only need one side? The single WBH1671 is also available. Doing the front too? See the WBH1670 front pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Genesis G70 2.0T & 3.3T sedan (2019 – on), G70 Shooting Brake (2021 – on) and Kia Stinger CK 200S, 200Si, GT-Line, 330S, 330Si & GT (2017 – 2023), without Brembo brakes, see fitment
- Position: rear left and rear right wheel hubs
- Includes: 2 × Basco WBH1671 (the same part fits either side)
- Change them: when a bearing hums, growls or has play (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: 2 hubs, so the rear end is renewed evenly
- Made for the G70 and Stinger: Basco lists WBH1671 as the rear wheel bearing hub for the Genesis G70 and Kia Stinger (non-Brembo)
- Complete hub assemblies: bearing, splined hub and 5 wheel studs in one sealed, pre-greased unit, ready to bolt in
- Splined for the rear drive shaft: suits the driven rear axle on these rear-wheel and all-wheel drive cars
- ABS-compatible: works with your existing rear wheel speed sensors
- Built to OE specifications: Basco says its parts are made to OE specifications as direct replacements, so no modification is needed
- Better value: $19.95 cheaper than buying two singles
Specifications
| Part number | Basco WBH1671 (× 2) |
| Position | Rear, left or right |
| Type | Bolt-on hub and bearing assembly (sealed, pre-greased) |
| Drive | Splined hub, for the driven rear axle |
| ABS | Yes, works with the vehicle's existing rear wheel speed sensor |
| Wheel studs | 5, fitted |
| Brembo brakes | No. Suits vehicles without Brembo brakes |
| Quantity | 2 hub assemblies (1 pair) |
Specifications as published by Basco for WBH1671 and shown in the product photos.
Vehicle fitment
| Model | Body | Engine | Built |
|---|---|---|---|
| Genesis G70 2.0T (IK) | 4 Door Sedan | 2.0L turbo petrol I4 (G4KL) | 2019 – 2023 |
| Genesis G70 2.0T Shooting Brake (IK) | 4 Door Wagon | 2.0L turbo petrol I4 (G4KL) | 2021 – on |
| Genesis G70 3.3T (IK) | 4 Door Sedan | 3.3L twin-turbo petrol V6 (G6DP) | 2019 – on |
| Kia Stinger 200S, 200Si (CK) | 4 Door Liftback | 2.0L turbo petrol I4 (G4KL) | 2017 – 2023 |
| Kia Stinger 200S, 200Si, GT-Line (CK) | 4 Door Liftback | 2.0L turbo petrol I4 (G4KL) | 2017 – 2023 |
| Kia Stinger GT-Line (CK) | 4 Door Liftback | 2.0L turbo petrol I4 (G4KL) | 2020 – 2023 |
| Kia Stinger 330S (CK) | 4 Door Liftback | 3.3L twin-turbo petrol V6 (G6DP) | 2020 – 2023 |
| Kia Stinger 330S, 330Si (CK) | 4 Door Liftback | 3.3L twin-turbo petrol V6 (G6DP) | 2017 – 2020 |
| Kia Stinger GT (CK) | 4 Door Liftback | 3.3L twin-turbo petrol V6 (G6DP) | 2017 – 2023 |
Suits the Genesis G70 sedan and Shooting Brake (IK) and the Kia Stinger (CK) with the 2.0L G4KL four-cylinder or the 3.3L G6DP V6, as listed by Basco. Vehicles without Brembo brakes only: Basco lists WBH1671 for models that don't have the Brembo brake package. Brembo calipers are usually painted and have "Brembo" on them, and they're common on the Stinger GT and G70 3.3T, so check yours before you order. Doesn't suit the front hubs (that's the WBH1670), or Kia and Genesis models not listed above.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco WBH1671: rear wheel bearing hub assembly, left or right (also sold on its own)
What's in the box
- 2 × Basco WBH1671 rear wheel bearing hub assembly, each with wheel studs
When to replace
Wheel bearings don't have a fixed replacement interval. Have them checked at every service and replace the hub when the bearing is noisy or has play. The hub is a sealed, pre-greased unit, so the bearing can't be repacked or adjusted. When one side has gone, the other side has done the same kilometres and is often close behind.
Signs they're worn
- A humming, growling or droning noise from the rear that gets louder with speed, and often changes as the car leans through a corner
- Free play or a clunk when the rear wheel is rocked top to bottom with the weight off it
- A grinding or rough feel when the wheel is spun by hand
- An ABS or traction control warning light, caused by a damaged encoder ring in the bearing
- Vibration through the seat or floor that wasn't there before
Fitting tips
- Do one side at a time.
- Support the vehicle on stands. Never work under a car on a jack alone.
- The hub is splined for the rear drive shaft. Undo the drive shaft (axle) nut before you lift the car, and use a new nut on reassembly if your workshop manual calls for one.
- Remove the rear wheel speed (ABS) sensor before you unbolt the hub, and refit it to the new hub with a clean tip.
- Clean any rust and scale off the knuckle face so the new hub sits flat. A hub that isn't seated square can be noisy and wear out early.
- Torque the hub bolts and the drive shaft nut to the figures in your workshop manual. Don't use a rattle gun to final-torque them.
- Check the brake rotor, pads and drive shaft CV joint while it's apart.
- Clear any ABS warning lights and test drive the vehicle to confirm the ABS works and the noise has gone.
Do the full job
Also in stock for the Genesis G70 and Kia Stinger:
- Basco WBH1671 Rear Wheel Bearing Hub Assembly (single)
- Basco WBH1670 Front Wheel Bearing Hub Assembly
- Basco WBH1670 Front Wheel Bearing Hub Assembly Pair (x2)
Need brake pads, rotors or suspension parts for your G70 or Stinger? Send us your rego or VIN and we'll source them for you.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two Basco WBH1671 rear wheel bearing hub assemblies, one for each rear wheel.
Can I buy just one side?
Yes. The single WBH1671 is also sold separately.
Is it the left or the right hub?
Either. Basco WBH1671 fits the rear left and the rear right.
Does it fit cars with Brembo brakes?
No. Basco lists WBH1671 for vehicles without Brembo brakes. If your Stinger or G70 has Brembo calipers, send us your VIN and we'll find the right hub.
Does it come with an ABS sensor?
No. It's ABS-compatible and works with your existing rear wheel speed sensor, which you transfer across.
Is this the front or the rear hub?
Rear. For the front, see the WBH1670 front hub or the WBH1670 front pair.
Do I need a wheel alignment?
Not normally for a hub swap, but have it checked if any suspension parts were disturbed.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.