Basco WBK1015 rear wheel bearing kit, 28 x 58 x 44mm, with hub nut, dust cap and circlip, to suit Suzuki Swift

Basco WBK1015 Rear Wheel Bearing Kit 28 x 58 x 44mm - to suit Suzuki Swift RS415 / EZ & Swift Sport 1.3L & 1.5L (2003 - 2011)

$41.95 AUD
Skip to product information
Basco WBK1015 rear wheel bearing kit, 28 x 58 x 44mm, with hub nut, dust cap and circlip, to suit Suzuki Swift

Basco WBK1015 Rear Wheel Bearing Kit 28 x 58 x 44mm - to suit Suzuki Swift RS415 / EZ & Swift Sport 1.3L & 1.5L (2003 - 2011)

$41.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco WBK1015 Rear Wheel Bearing Kit, 28 x 58 x 44mm: Suzuki Swift

A rear wheel bearing kit for the Suzuki Swift hatch, including the RS415 / EZ and early Swift Sport, with the 1.3L M13A and 1.5L M15A petrol engines (2003 – 2011). It's the rear wheel bearing that carries the weight of the rear of the car and lets the wheel spin freely. The kit measures 28mm inside, 58mm outside and 44mm wide, and includes the bearing, hub nut, dust cap and circlip. One kit does one rear wheel, so order 2 to do both sides.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Suzuki Swift hatch 1.3L & 1.5L, incl. RS415 / EZ and Swift Sport (2003 – 2011), see fitment
  • Position: rear, left or right
  • Size: 28mm ID x 58mm OD x 44mm wide
  • Includes: bearing, hub nut, dust cap and circlip
  • Sold: as 1 kit. Order 2 for both rear wheels
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Complete kit: bearing, hub nut, dust cap and circlip, so you're not reusing old hardware
  • Fits either rear side: the same kit goes on the left or right
  • Built to OE specifications: Basco says its bearings are made to OE specifications as direct replacements

Specifications

Part number Basco WBK1015
Position Rear, left or right
Inside diameter 28mm
Outside diameter 58mm
Width 44mm
Kit contents 1 bearing, 1 hub nut, 1 dust cap, 1 circlip

Fitment and size as published by Basco. Kit contents as pictured on the Basco product photo for WBK1015.

Vehicle fitment

Basco lists this part for the models below. Years are model build years as Basco lists them.

Model Body / series Engine Built
Suzuki Swift 4 Door Hatchback 1.3L M13A petrol 2004 – 2010
Suzuki Swift 4 Door Hatchback 1.5L M15A petrol 2004 – 2007
Suzuki Swift RS415, EZ 4 Door Hatchback 1.5L M15A petrol 2004 – 2011
Suzuki Swift Sport 4 Door Hatchback 1.5L M15A petrol 2003 – 2004

Doesn't suit the later Swift FZ / AZ (2011 – on), the Swift Sport with the 1.6L M16A, or the Ignis, Baleno or Vitara. Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco WBK1015 rear wheel bearing, 28 x 58 x 44mm
  • 1 × hub nut
  • 1 × dust cap
  • 1 × circlip

One kit does one rear wheel. Doing both? Add 2 to your cart.

When to replace

Wheel bearings don't have a fixed replacement interval. Have them checked at every service and replace a bearing when it's noisy, has play, or feels rough when the wheel is spun by hand. Water crossings, potholes and heavy loads wear them faster.

Signs it's worn

  • A humming, droning or growling noise that gets louder with speed, and often changes when you turn
  • Play or a clunk when the wheel is rocked top to bottom with the vehicle on stands
  • A rough or grinding feel when the wheel is spun by hand

Fitting tips

  • This is a press-in bearing. You'll need a hydraulic press or a bearing press kit to remove the old bearing and fit the new one.
  • Press only on the outer race when fitting the bearing into the knuckle or hub carrier, and only on the inner race when pressing the hub in.
  • Use the new circlip, hub nut and dust cap in the kit, and torque the nut to the figure in your workshop manual.
  • Check the rear hub seal and the ABS sensor (if fitted) while you're there.

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is it for the front or the rear?
Rear. WBK1015 is a rear wheel bearing kit.

Does it fit my later Swift FZ?
No. Basco only lists it for the earlier Swift through to about 2011 (RS415 / EZ and early Sport).

What's in the kit?
1 bearing, 1 hub nut, 1 dust cap and 1 circlip.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like