Basco WBK1028 Wheel Bearing Kit 40 x 74 x 42mm - to suit Toyota Corolla ZZE122/123 & ZRE172, Celica ZZT231, Prius NHW10/11 & MR2 Spyder
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco WBK1028 Wheel Bearing Kit (40 x 74 x 42mm): Toyota Corolla, Celica, Prius & MR2 Spyder
A 40 x 74 x 42mm wheel bearing for the Toyota Corolla ZZE122 / ZZE123 and ZRE172 sedan, Celica ZZT231, Prius NHW10 / NHW11, Wish and MR2 Spyder / MR-S. It's a press-in bearing that sits in the steering knuckle and lets the wheel turn smoothly while carrying the weight of the vehicle. Basco's reseller lists it as the front bearing on these models, and on the MR2 Spyder / MR-S it's used front and rear.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota Corolla ZZE122 / ZZE123 (2001 – 2007), Corolla ZRE172 sedan (2013 – 2016), Celica ZZT231, Prius NHW10 / NHW11, Wish ZNE10 and MR2 Spyder / MR-S, see fitment
- Bearing size: 40 x 74 x 42mm
- ABS: none on the bearing. The ABS sensor on these models reads from the driveshaft
- Sold: individually (1 bearing). Order 2 for both sides
- Change it: when the bearing growls or has play (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Press-in bearing: a sealed double-row bearing that presses into the steering knuckle
- Built to OE specifications: Basco says its bearings are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco WBK1028 |
| Bearing size (ID x OD x width) | 40 x 74 x 42mm |
| ABS | No (ABS sensor reads from the driveshaft) |
| Quantity | 1 bearing |
Specifications as published by Basco for WBK1028.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Toyota Corolla ZZE122R (incl. Ascent, Ascent Seca) | Hatch, sedan & wagon | 1.8L 1ZZFE petrol | 2001 – 2007 |
| Toyota Corolla Sportivo ZZE123R | Hatch | 1.8L 2ZZGE petrol | 2003 – 2006 |
| Toyota Corolla RunX, Fielder, Spacio, Luxel ZZE122R / ZZE123R | Hatch & wagon | 1.8L 1ZZFE / 2ZZGE petrol | 2000 – 2007 |
| Toyota Allex ZZE122R / ZZE123R | Hatch | 1.8L 1ZZFE / 2ZZGE petrol | 2001 – 2006 |
| Toyota Corolla ZRE172R (Ascent, SX, ZR) | Sedan | 1.8L 2ZRFE petrol | 2013 – 2016* |
| Toyota Celica SX, ZR ZZT231R | Hatch | 1.8L 2ZZGE petrol | 1999 – 2006 |
| Toyota Prius NHW10R / NHW11R | Sedan | 1.5L 1NZFXE petrol hybrid | 1997 – 2003 |
| Toyota Wish ZNE10R | Wagon | 1.8L 1ZZFE petrol | 2003 – 2009 |
| Toyota MR2 Spyder / MR-S ZZW30R | Convertible | 1.8L 1ZZFE petrol | 1999 – 2007 |
*Corolla ZRE172 sedan: Basco's reseller lists models built up to 10/2016 only. Peach (Basco's trade catalogue) lists this bearing as a rear bearing kit, while Basco's reseller lists it as the front bearing on these models and front and rear on the MR2 Spyder / MR-S. Measure your old bearing (40 x 74 x 42mm) or send us your VIN before ordering. Doesn't suit the Corolla ZRE152 or Corolla hatch ZRE182. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco WBK1028 wheel bearing (40 x 74 x 42mm)
Basco doesn't list a circlip or hub nut with this bearing. Sold individually. Replacing both sides? Add 2 to your cart.
When to replace
Wheel bearings don't have a fixed replacement interval. Replace a bearing when it's noisy or has play. Bearings on both sides do the same work, so it's worth checking the other side while you're there.
Signs it's worn
- A growling, humming or grinding noise that rises with speed and changes when you turn
- Play or rocking in the wheel when you grab it at the top and bottom
- Uneven brake pad wear or a vibration through the steering wheel
Fitting tips
- Press the bearing in through its outer race only, never through the inner race or seals.
- Fit a new circlip if your knuckle uses one, and a new hub or axle nut where the workshop manual calls for it.
- Torque everything to the figures in your workshop manual.
- A press and the right adaptors make the job much easier. If you don't have them, a workshop can press it in for you.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is it the front or the rear bearing?
Basco's reseller lists WBK1028 as the front bearing on the Corolla, Celica, Prius and Wish, and front and rear on the MR2 Spyder / MR-S. Basco's trade catalogue lists it as a rear bearing kit, so measure your old bearing (40 x 74 x 42mm) or send us your VIN if you're not sure.
Does it come with an ABS ring?
No. On these models the ABS sensor reads from the driveshaft, not the bearing.
Does it fit the 2016 – 2019 Corolla sedan?
Basco's reseller lists the ZRE172 sedan up to 10/2016 only. Send us your VIN for later builds.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.