Basco WP10009 Engine Cooling Water Pump (with Gasket) - to suit Chery J11 T1X & J3 M1X 1.6L SQRE / 2.0L SQR484F (2011 - 2017)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco WP10009 Engine Water Pump (with Gasket): Chery J11 & J3, 1.6L SQRE / 2.0L SQR484F
A new timing-belt-driven engine water pump for the Chery J11 (T1X) and Chery J3 (M1X), supplied with its housing gasket. It suits the 1.6L SQRE and 2.0L SQR484F petrol engines and is the same pump Basco includes in its ETK1303W timing belt kit.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Chery J11 T1X 2.0L SQR484F (2011–2014) and 1.6L SQRE (2014–2017); Chery J3 M1X 1.6L SQRE (2011–2017)
- Type: mechanical engine water pump with timing belt sprocket, plus housing gasket
- Replaces: the original Chery pump; Basco part number WP10009 (also supplied in Basco timing belt kit ETK1303W)
- Change it: with the timing belt, or sooner if it leaks or gets noisy
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Cast aluminium body: Basco says its pumps are cast from 100% new aluminium for strength
- Unitised seal and bearing: Basco uses unitised seals and case-hardened roller bearings for a long, leak-free life
- Gasket supplied: comes with the pump-to-block gasket, so you're not reusing the old one
- Built for Australian conditions: Basco engineers its pump range for the Australian market
Specifications
| Part number | Basco WP10009 |
| Barcode (EAN) | 9356247126685 |
| Drive | Timing belt (toothed sprocket) |
| Housing | Cast aluminium |
| Gasket | Included |
| Engines | Chery 1.6L SQRE, 2.0L SQR484F (I4, 16V DOHC) |
Part number, barcode and fitment are from Basco's own listing for WP10009. Construction details are from Basco's water pump range information.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Chery J11 (T1X) 4-door SUV | 2.0L SQR484F | 02/2011 – 02/2014 |
| Chery J11 (T1X) 4-door SUV | 1.6L SQRE (G16AA) | 03/2014 – 01/2017 |
| Chery J3 (M1X) 4-door hatch | 1.6L SQRE (G16AA) | 09/2011 – 01/2017 |
All of the above are I4 16V DOHC petrol engines with a timing belt. Doesn't suit the Chery Omoda 5 / C5 1.5L turbo, which uses the Basco WP9002 pump with pulley. We also don't list it for the Tiggo 7 / Tiggo 7 Pro 1.6L turbo (SQRF4J16). That engine has a timing chain and a pump driven by the accessory belt, so contact us before ordering for one.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco WP10009 engine water pump
- 1 × water pump gasket
The timing belt, tensioner and coolant aren't included.
When to replace
Basco classes water pumps as a periodic replacement part. On these engines the pump is turned by the timing belt, so the usual practice is to fit a new pump whenever the timing belt is replaced at the interval in your Chery service schedule. That saves paying for the same labour twice.
Replace it sooner if it shows any of the signs below.
Signs it's failing
- Coolant weeping from the pump's weep hole, or crusty coolant residue around the pump
- The coolant level dropping with no other obvious leak
- The temperature gauge climbing, or the engine overheating
- A growl, whine or grinding from the timing belt area that changes with engine speed
- Play or wobble in the pump sprocket when the timing belt is off
- Coolant on the timing belt (replace the belt too, as coolant damages it)
Installation notes (from Basco's water pump technical note)
Basco has published a short technical note on handling and fitting water pumps. In our own words:
- Never run it dry. Running the pump without coolant overheats the seal faces and wrecks the mechanical seal straight away, which causes a leak.
- Handle it gently. Even a small drop can damage the bearing or the housing.
- Leave factory-fitted O-rings and gaskets alone. If they're already on the pump, don't remove and refit them.
- No liquid gasket on O-ring pumps. Adding sealant where an O-ring does the sealing can cause a leak.
- Follow the factory procedure. Use Chery's workshop manual for the removal and fitting sequence, and set timing-belt timing exactly.
- Torque it properly. Tighten the pump bolts to the figures in the workshop manual.
- Use fresh coolant. Flush the system and refill with fresh coolant that meets Chery's specification, because old coolant can cause cavitation, corrosion and leaks.
- Use new bolts where possible. Old bolts can lose clamping force.
Download the Basco Water Pump Technical Note (PDF).
Do the full job
While the timing belt is off, it's worth renewing:
- The timing belt, tensioner, idlers and cam and crank seals. Basco's ETK1303 timing belt kit suits these engines, and the ETK1303W version includes this pump. Ask us for a price.
- The engine coolant (flush and refill)
- Any perished coolant hoses or clamps
Browse all our Chery parts.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Does it come with a gasket?
Yes, the housing gasket is in the box.
Will it fit my Tiggo 7 or Omoda 5?
The Omoda 5 / C5 1.5L turbo uses a different pump, the Basco WP9002. The Tiggo 7 / 7 Pro 1.6L turbo has a timing chain engine with an accessory-belt-driven pump, so this timing-belt pump isn't listed for it here. Send us your VIN and we'll find the right one.
Should I replace the timing belt at the same time?
Yes, it's strongly recommended. The pump is driven by the timing belt, and most of the labour is the same.
Does it fit both the 1.6L and 2.0L J11?
Yes. Basco lists WP10009 for the J11 2.0L SQR484F (2011–2014) and the J11 1.6L SQRE (2014–2017).
Will a non-genuine pump void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.