Bendix DB2769-GCT Front Brake Pad Set - to suit Chery Omoda 5 / C5, Omoda E5 & Tiggo 4 (2022 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Bendix DB2769-GCT General CT Front Brake Pads: Chery Omoda 5 / C5, Omoda E5 & Tiggo 4
Everyday front brake pad set for the Chery Omoda 5 / C5, Omoda E5 and Tiggo 4. Bendix General CT pads pair Ceramic Technology with the Blue Titanium Stripe for low dust, low rotor wear and confident stopping from the first drive.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Chery Omoda 5 / C5 (incl. GT), Omoda E5 and Tiggo 4 (see fitment)
- Position: front axle, one complete axle set
- Range: Bendix General CT (Ceramic Technology)
- Pad size: 131.4 × 55.4 × 16 mm
Key features
- Ceramic Technology: durability, low dust and low rotor wear (Bendix)
- Blue Titanium Stripe: for sure stopping right out of the box, with no bedding-in needed
- Everyday driving: designed as a general-purpose passenger vehicle pad
Bendix describes General CT as a general-purpose passenger vehicle brake pad for everyday driving, with Ceramic Technology for durability, low dust and low rotor wear, plus the Blue Titanium Stripe for sure stopping right out of the box.
Specifications
| Part number | DB2769-GCT |
| Brand / range | Bendix General CT |
| Position | Front axle |
| Width | 131.4 mm |
| Height | 55.4 mm |
| Thickness | 16 mm |
Dimensions from Bendix's own catalogue.
Vehicle fitment (front axle)
| Make | Model | Series | Years | Engine |
|---|---|---|---|---|
| Chery | Omoda 5 BX, EX, FX | T34 | 2022 – 2025 | 1.5L turbo petrol (SQRE4T15C) |
| Chery | Omoda 5 GT | T34 | 2023 – 2025 | 1.6L turbo petrol (SQRF4J16) |
| Chery | C5 | T34 | 2025 – on | 1.6L turbo petrol (SQRF4J16) |
| Chery | Omoda E5 | — | 2024 – 2025 | Electric (BEV) |
| Chery | Tiggo 4 | T3X | 2024 – on | 1.5L turbo petrol (SQRE4T15) |
| Omoda | C5 BX, EX, FX | T34 | 2022 – 2025 | 1.5L turbo petrol (SQRE4T15C) |
| Omoda | C5 GT | T34 | 2023 – 2025 | 1.6L turbo petrol (SQRF4J16) |
| Omoda | E5 | — | 2024 – 2025 | Electric (BEV) |
Fitment is from the Bendix Australian catalogue via our supplier. Fitment can vary by trim and brake package. Not listed for this pad: Tiggo 4 Hybrid.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Bendix DB2769-GCT front brake pad set (4 pads, one axle)
When to replace
Check pad thickness at every service. Replace pads before the friction material reaches the minimum thickness in your workshop manual, and always replace both sides of the axle together. The Omoda E5 uses regenerative braking, so its pads can last longer but may glaze or corrode from light use; inspect them at every service.
Signs it's worn
- Squealing or grinding when braking
- Vibration through the brake pedal or steering wheel
- Longer stopping distances or a soft pedal
- The car pulls to one side under braking
- A brake wear warning on the dash
Fitting tips
- Measure the rotors and machine or replace them if they're below minimum thickness or scored.
- Clean and lubricate the caliper slide pins and pad abutments with a suitable brake grease (keep it off the friction material).
- Push the pistons back slowly and watch the brake fluid level in the reservoir.
- Pump the pedal until it's firm before driving, then test at low speed.
- Tighten caliper bolts and wheel nuts to the torque in your workshop manual.
Do the full job
Working on the front end of your Omoda 5 / C5? These parts are also in stock:
- Basco TE10009 Outer Tie Rod End Left and TE10010 Outer Tie Rod End Right
- Basco RE10008 Inner Rack End Pair (Omoda 5 1.5L)
- Basco BEM4120 Right Hand Engine Mount and BEM4122 Rear Engine / Transmission Mount
Why Bendix?
Bendix is one of Australia's best-known aftermarket brake brands, engineered for local roads and conditions. Its General CT range is the everyday choice for passenger cars, with coverage that now includes popular Chinese brands like Chery and Omoda.
FAQs
Does it fit both sides?
Yes. It's a complete front axle set for the left and right wheels.
Does it fit the Omoda 5 GT / C5 GT 1.6L?
Yes. Bendix lists DB2769-GCT for the GT 1.6L (SQRF4J16) from 2023. If your car has an upgraded or aftermarket brake package, send us your VIN first.
Does it fit the Tiggo 4 Hybrid?
It isn't listed for the Tiggo 4 Hybrid. Send us your rego or VIN and we'll find the right pad.
Will non-genuine pads void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Bendix manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.