Saleri PA1270A Engine Water Pump - to suit Audi A3, Volkswagen Golf, Beetle, Caddy, Jetta, Passat & Skoda Octavia 1.6L / 2.0L FSI Petrol (1997 - 2011)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Saleri PA1270A Engine Water Pump: Audi A3, Volkswagen & Skoda 1.6L and 2.0L FSI Petrol
A new mechanical engine water pump from Italian OE cooling specialist Saleri SIL, for the VW Group 1.6L 8-valve and 2.0L FSI petrol engines in the Audi A3 (8L and 8P, incl. Sportback and Convertible), VW Golf MK4 and MK5, Beetle, Caddy, Jetta and Passat B6, and the Skoda Octavia 1.6 (1Z). It has a toothed drive sprocket and a cast metal body with the impeller and O-ring fitted, as pictured.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Audi A3, VW Golf, Beetle, Caddy, Jetta & Passat, and Skoda Octavia 1.6L and 2.0L FSI petrol models, 1997 – 2011, see fitment
- Type: mechanical water pump with a 23-tooth drive sprocket
- Sold: individually (1 water pump)
- Change it: when it leaks, gets noisy or the engine runs hot, or whenever the timing belt is replaced
- Brand: Saleri SIL, an Italian OE water pump manufacturer
Key features
- OE manufacturer: Saleri supplies water pumps as original equipment to car makers including Volkswagen and Audi
- Direct replacement: cross-references to the genuine VW Group 06B 121 011 pump family
- Tested before it ships: Saleri end-of-line tests its pumps for pressure, leakage, flow rate and dimensional tolerances
- Ready to fit: our photos show the impeller and the body O-ring already fitted
Specifications
| Part number | Saleri SIL PA1270A (also listed as 561270A) |
| Barcode (EAN) | 8019738125444 |
| Genuine VW Group reference | 06B 121 011 family (e.g. 06B 121 011 H, L, M, Q) |
| Type | Mechanical engine water pump |
| Drive | Toothed sprocket, 23 teeth, 57.2 mm diameter |
| Impeller diameter | 60 mm |
| Engines | VW Group 4-cylinder petrol: 1.6L AEH, AKL, AVU, AYD, BFQ, BFS, BGU, BSE; 2.0L FSI BLR, BLX, BLY, BVY |
| Quantity | 1 water pump |
Part number, barcode, OE reference, tooth count and dimensions are from Saleri SIL's published catalogue data for PA1270A. Fitment is from our supplier's listing.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Audi A3 1.6 (8L) | 1.6L petrol (AEH, AKL, AVU, BFQ) | 1997 – 2004 |
| Audi A3, A3 Sportback & A3 Convertible 1.6 Attraction (8P) | 1.6L petrol (BGU, BSE) | 2004 – 2011 |
| Audi A3 & A3 Sportback 2.0 FSI Ambition (8P) | 2.0L FSI petrol (BLR, BLY, BVY) | 2004 – 2007 |
| Skoda Octavia 1.6 75 MPI (1Z), Liftback & Wagon | 1.6L petrol (BSE) | 2009 – 2010 |
| Volkswagen Beetle 1.6 (9C) | 1.6L petrol (AYD, BFS) | 2001 – 2011 |
| Volkswagen Caddy 1.6 (2K) | 1.6L petrol (BGU) | 2004 – 2006 |
| Volkswagen Golf MK4 1.6 incl. GL, S/SE, Generation | 1.6L petrol (AEH, AKL, AVU, BFQ) | 1998 – 2004 |
| Volkswagen Golf MK5 1.6, 2 & 4 door | 1.6L petrol (BGU, BSE) | 2004 – 2009 |
| Volkswagen Golf 2.0 FSI MK5 | 2.0L FSI petrol (BLR, BLX, BVY) | 2003 – 2009 |
| Volkswagen Jetta 2.0 / 2.0 FSI (1K) | 2.0L FSI petrol (BLR, BVY) | 2005 – 2009 |
| Volkswagen Passat 2.0 FSI (B6), Sedan & Wagon | 2.0L FSI petrol (BVY) | 2006 – 2009 |
Suits the listed Audi, Volkswagen and Skoda models with the engine codes shown. Doesn't suit diesel (TDI) models, turbo petrol (TFSI / TSI / 1.8T) models such as the Golf GTI, Audi S3 and TT, or any model or engine code not listed above. Your engine code is on the sticker in the service book or spare wheel well.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Saleri PA1270A engine water pump, as pictured
The timing belt, coolant and bolts aren't included.
When to replace
Water pumps don't have a fixed replacement interval of their own. Replace the pump when it leaks, gets noisy or lets the engine run hot. This pump has a toothed sprocket, so on these engines it's driven by the timing belt. If yours is, it's best practice to replace the water pump and the timing belt kit (belt, tensioner and idler) together, because most of the labour is the same and an old pump can fail and damage a new belt.
Signs it's failing
- Coolant weeping from the pump's weep hole, or crusty coolant residue around the pump
- The coolant level dropping with no other obvious leak
- The temperature gauge climbing, or the engine overheating
- A growl, whine or grinding from the timing belt end of the engine that changes with engine speed
- Play or wobble in the pump sprocket when the belt is off
Fitting tips
- Never run it dry. Running the pump without coolant damages the mechanical seal straight away and causes a leak.
- Handle it gently. Even a small drop can damage the bearing, the impeller or the housing.
- Leave the factory-fitted O-ring alone, and don't add liquid gasket where the O-ring does the sealing.
- Follow the factory procedure. Lock the engine timing as per the workshop manual before you remove the timing belt.
- Torque it properly. Tighten the pump bolts to the figures in the workshop manual.
- Use fresh coolant. Flush the system and refill with coolant that meets the VW Group specification for your car.
Do the full job
While you're there, it's worth renewing:
- The Basco ETK1050 Timing Belt Kit (Gates belt, tensioner pulley, cam and crank seals), because this pump is driven by the timing belt. It suits the 1.6L engines (AEH, AKL, AVU, AYD, BFQ, BFS, BGU, BSE). For the 2.0L FSI engines, ask us for a price.
- The Basco IT-10003 Drive Belt Tensioner, which suits the same engines. The accessory drive belt has to come off for this job anyway, so it's a good time to check the tensioner.
- The engine coolant (flush and refill)
- Any perished coolant hoses or clamps
Send us your rego or VIN and we'll source the rest for your Audi, Volkswagen or Skoda.
Why Saleri?
Saleri SIL is an Italian cooling-system specialist with more than 70 years' experience. It supplies water pumps as original equipment to car makers including Volkswagen, Audi, BMW, Alfa Romeo, Fiat, Ferrari and Maserati, and its aftermarket pumps are made to the same specifications as their OE counterparts.
FAQs
Does it fit my Golf GTI?
No. It's for the 1.6L and 2.0L FSI non-turbo engines listed in the fitment table, not the turbo GTI.
Does it fit the diesel (TDI) models?
No. It's for the petrol models and engine codes listed in the fitment table.
Should I replace the timing belt at the same time?
Yes, if your pump is driven by the timing belt. Most of the labour is shared, so doing both together saves money and protects the new belt.
Will a non-genuine pump void my warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.