Basco BCA1005 & BCA1006 Front Lower Control Arm Pair (Left & Right) - to suit Toyota Camry ACV36 & MCV36, Avalon MCX10 (2000 - 2006)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA1005 + BCA1006 Front Lower Control Arm Pair (Left & Right): Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10
Both front lower control arms for the Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10, in one order, each supplied with its ball joint fitted. You get the Basco BCA1005 front left and BCA1006 front right, so both sides are renewed together and the front end stays balanced.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota Camry ACV36 2.4L and MCV36 3.0L V6 (2002 – 2006), Toyota Avalon MCX10 3.0L V6 (2000 – 2006), see fitment
- Position: front left and front right lower control arms
- Includes: 1 × Basco BCA1005 (left, passenger side) and 1 × Basco BCA1006 (right, driver side)
- Change them: when a ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Ball joints fitted: each arm comes with its ball joint and bushes already in place
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Better value: saves $9.95 compared with buying both sides separately
Specifications
| Spec | BCA1005 (left) | BCA1006 (right) |
|---|---|---|
| Position | Front left lower (passenger side) | Front right lower (driver side) |
| Ball joint | Fitted | Fitted |
| Ball joint cone diameter | 17.6mm | 17.6mm |
| Bush hole diameter | 14.3mm | 14.3mm |
Specifications as published for Basco BCA1005 and BCA1006.
Vehicle fitment
Basco lists this arm for the models below. Years are model build years as Basco lists them.
| Model | Body | Engine | Built |
|---|---|---|---|
| Toyota Avalon MCX10R | 4 Door Sedan | 3.0L 1MZFE V6 petrol | 2000 – 2006 |
| Toyota Camry ACV36R | 4 Door Sedan | 2.4L 2AZFE 4-cyl petrol | 2002 – 2006 |
| Toyota Camry MCV36R | 4 Door Sedan | 3.0L 1MZFE V6 petrol | 2002 – 2006 |
Doesn't suit the earlier Camry SXV20 / MCV20 (1997 – 2002), the later Camry ACV40 (2006 – on), the Camry wagon, or the upper or rear arms. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco BCA1005: front left lower control arm (also sold on its own)
- Basco BCA1006: front right lower control arm (also sold on its own)
What's in the box
- 1 × Basco BCA1005 front left lower control arm, with ball joint fitted
- 1 × Basco BCA1006 front right lower control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with these arms.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joints and bushes checked at every service, and replace the arms when a ball joint has play or a split boot, or the bushes are cracked or perished. Both sides do the same work, so replacing them as a pair keeps the handling even and means you only pay for one wheel alignment.
Signs they're worn
- Knocking or clunking from the front over bumps, speed humps or rough roads
- Vague or wandering steering, or the car pulling to one side
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split ball joint boot, or cracked and perished bushes
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Tighten the bush bolts with the suspension at ride height, so the bushes aren't pre-loaded and don't tear.
- Get a wheel alignment after replacing a lower control arm.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two front lower control arms, each with its ball joint fitted: Basco BCA1005 (front left) and BCA1006 (front right).
Can I buy just one side?
Yes. BCA1005 (left) and BCA1006 (right) are also sold separately.
Does it fit the V6 Camry?
Yes. Basco lists it for the Camry ACV36 2.4L four-cylinder and the MCV36 3.0L V6, built 2002 – 2006, plus the Avalon MCX10 3.0L V6.
Do I need a wheel alignment?
Yes, get one after fitting new control arms. Doing both sides at once means you only need one alignment.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.