Basco BCA1005 front left lower control arm with ball joint, to suit Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10

Basco BCA1005 Front Left Lower Control Arm (LHS Passenger Side) - to suit Toyota Camry ACV36 & MCV36, Avalon MCX10 (2000 - 2006)

$93.95 AUD
Skip to product information
Basco BCA1005 front left lower control arm with ball joint, to suit Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10

Basco BCA1005 Front Left Lower Control Arm (LHS Passenger Side) - to suit Toyota Camry ACV36 & MCV36, Avalon MCX10 (2000 - 2006)

$93.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco BCA1005 Front Left Lower Control Arm: Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10

The front left lower control arm for the Toyota Camry ACV36 / MCV36 and Toyota Avalon MCX10, supplied with the ball joint fitted. It locates the bottom of the front left wheel hub and carries much of the weight and braking load, so it keeps your wheel alignment, steering and braking stable. In Australia the front left is the passenger side. Need the other side? The front right is the Basco BCA1006, or get both sides together in the BCA1005 + BCA1006 pair.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Toyota Camry ACV36 2.4L and MCV36 3.0L V6 (2002 – 2006), Toyota Avalon MCX10 3.0L V6 (2000 – 2006), see fitment
  • Position: front left lower control arm (LHS, passenger side)
  • Ball joint: fitted, 17.6mm cone
  • Partner part: Basco BCA1006 (front right)
  • Change it: when the ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Ball joint fitted: the arm comes with its ball joint and bushes already in place, so there's no pressing parts in or out
  • Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
  • Protective coating: a powder-coated finish to resist corrosion from road grime and weather
  • Side-specific: left and right are separate part numbers. Order BCA1005 for the front left

Specifications

Part number Basco BCA1005
Position Front left lower (LHS, passenger side)
Ball joint Fitted
Ball joint cone diameter 17.6mm
Bush hole diameter 14.3mm
Quantity 1 control arm

Specifications as published for Basco BCA1005.

Vehicle fitment

Basco lists this arm for the models below. Years are model build years as Basco lists them.

Model Body Engine Built
Toyota Avalon MCX10R 4 Door Sedan 3.0L 1MZFE V6 petrol 2000 – 2006
Toyota Camry ACV36R 4 Door Sedan 2.4L 2AZFE 4-cyl petrol 2002 – 2006
Toyota Camry MCV36R 4 Door Sedan 3.0L 1MZFE V6 petrol 2002 – 2006

Doesn't suit the front right (that's Basco BCA1006), the earlier Camry SXV20 / MCV20 (1997 – 2002), the later Camry ACV40 (2006 – on), the Camry wagon, or the upper or rear arms. Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco BCA1005 front left lower control arm, with ball joint fitted

Basco doesn't list any mounting bolts or nuts with this arm. Need both sides? The BCA1005 + BCA1006 pair includes BCA1005 and BCA1006, or add the front right Basco BCA1006 on its own.

When to replace

Control arms don't have a fixed replacement interval. Have the ball joint and bushes checked at every service, and replace the arm when the ball joint has play or a split boot, or the bushes are cracked or perished.

Signs it's worn

  • Knocking or clunking from the front over bumps, speed humps or rough roads
  • Vague or wandering steering, or the car pulling to one side
  • Uneven or rapid wear on the inside or outside edge of the front tyre
  • A split ball joint boot, or a cracked and perished bush

Fitting tips

  • Tighten the bush bolts with the suspension at ride height, so the bushes aren't pre-loaded and don't tear.
  • Get a wheel alignment after replacing a lower control arm.
  • Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
  • Check the other control arms, tie rod ends and sway bar links while you're there.

Do the full job

Also in stock for these models:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right arm?
BCA1005 is the front left (passenger side in Australia). The front right is Basco BCA1006.

Does it come with the ball joint?
Yes. The ball joint comes fitted to the arm. Basco doesn't list any mounting bolts or nuts in the box.

Should I replace both sides?
It's a good idea if the car has done big kilometres, because both arms do the same work and wear at a similar rate. The BCA1005 + BCA1006 pair saves $9.95 compared with buying both sides separately. If only one side is worn or damaged, replacing that side is fine.

Does it fit the V6 Camry?
Yes. Basco lists it for the Camry ACV36 2.4L four-cylinder and the MCV36 3.0L V6, built 2002 – 2006, plus the Avalon MCX10 3.0L V6.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like