Basco BCA1102 & BCA1114 Front Upper Control Arm Pair (Left & Right) - to suit Holden Colorado RG & Colorado 7, Isuzu D-Max, MU-X & LDV T60
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA1102 + BCA1114 Front Upper Control Arm Pair (Left & Right): Holden Colorado RG & Colorado 7, Isuzu D-Max, MU-X & LDV T60
Both front upper control arms for the Holden Colorado RG, Colorado 7, Isuzu D-Max, MU-X and LDV T60, in one order, each supplied with its ball joint fitted. You get the Basco BCA1102 front left and BCA1114 front right, so both sides are renewed together and the front end stays balanced. Due for a service too? See the Basco FSK440C filter kit and Bendix DB1841-UP4WD front brake pads.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Holden Colorado RG (2012 – 2020) & Colorado 7 (2012 – 2018), Isuzu D-Max TFR/TFS 3.0L (2008 – 2020), MU-X (2013 – 2021) and LDV T60 (2017 – on), see fitment
- Position: front left and front right upper control arms
- Includes: 1 × Basco BCA1102 (left, passenger side) and 1 × Basco BCA1114 (right, driver side)
- Change them: when a ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Made for the Colorado, D-Max, MU-X and T60: Basco lists BCA1102 (left) and BCA1114 (right) as the front upper control arms for these models
- Ball joints fitted: each arm comes with its upper ball joint and bushes already in place
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Better value: cheaper than buying the two arms separately
Specifications
| Spec | BCA1102 (left) | BCA1114 (right) |
|---|---|---|
| Position | Front left upper (LHS, passenger side) | Front right upper (RHS, driver side) |
| Ball joint | Fitted | Fitted |
| Finish | Black | Black |
Vehicle fitment
All 4-cylinder 16V DOHC turbo diesels. Holden LWH = 2.8L Duramax 2012 – 2013, LWN = 2.8L Duramax 2013 – 2020.
| Vehicle | Body | Years | Engine |
|---|---|---|---|
| Holden Colorado DX RG | Single Cab Chassis | 2012 – 2013 2013 – 2014 2012 – 2013 2013 – 2020 |
2.5L LVN 2.5L LKH 2.8L LWH 2.8L LWN |
| Holden Colorado LX RG | Single Cab Chassis, Space Cab Chassis, Crew Cab Chassis, Crew Cab Pickup (Wellside) | 2012 – 2013 | 2.8L LWH |
| Holden Colorado LX / LS RG | Single Cab Chassis, Space Cab Chassis, Crew Cab Chassis, Crew Cab Pickup (Wellside) | 2013 – 2020 | 2.8L LWN |
| Holden Colorado LS RG | Single Cab Chassis | 2013 – 2020 | 2.8L LWN |
| Holden Colorado LX / LS / LS-X RG | Crew Cab Pickup (Wellside) | 2013 – 2020 | 2.8L LWN |
| Holden Colorado LT RG | Crew Cab Pickup (Wellside) | 2012 – 2013 2013 – 2020 |
2.8L LWH 2.8L LWN |
| Holden Colorado LTZ RG | Crew Cab Pickup (Wellside) | 2012 – 2013 2013 – 2020 |
2.8L LWH 2.8L LWN |
| Holden Colorado LTZ Space Cab RG | Space Cab Pickup (Wellside) | 2012 – 2013 2013 – 2020 |
2.8L LWH 2.8L LWN |
| Holden Colorado LTZ, LTZ+ & Storm RG | Crew Cab Pickup (Wellside) | 2013 – 2020 | 2.8L LWN |
| Holden Colorado Z71 RG | Crew Cab Pickup (Wellside) | 2015 – 2020 | 2.8L LWN |
| Holden Colorado 7 LT RG | 4 Door SUV | 2012 – 2013 2013 – 2017 |
2.8L LWH 2.8L LWN |
| Holden Colorado 7 LTZ RG | 4 Door SUV | 2012 – 2013 2013 – 2018 |
2.8L LWH 2.8L LWN |
| Isuzu D-Max TFR | 2 Door Ute (Single Cab) | 2012 – 2020 | 3.0L 4JJ1-TCX |
| Isuzu D-Max TFR | 4 Door Ute (Dual Cab) | 2008 – 2012 2012 – 2020 |
3.0L 4JJ1-TCX |
| Isuzu D-Max SX TFR | 2 Door Ute (Single Cab) | 2008 – 2012 | 3.0L 4JJ1-TCX |
| Isuzu D-Max SX Space Cab TFR | 4 Door Ute (Space Cab) | 2015 – 2020 | 3.0L 4JJ1-TCX |
| Isuzu D-Max TFS | 2 Door Ute (Single Cab), 4 Door Ute (Dual Cab) | 2012 – 2020 | 3.0L 4JJ1-TCX |
| Isuzu D-Max Space Cab TFS | 4 Door Ute (Space Cab) | 2012 – 2020 | 3.0L 4JJ1-TCX |
| Isuzu MU-X LS-M, LS-T & LS-U UCR / UCS | 4 Door SUV | 2013 – 2021 | 3.0L 4JJ1-TC |
| LDV T60 | 2 Door Ute (Single Cab Chassis) | 2018 – 2020 | 2.8L SC28R150Q5 (VM) |
| LDV T60 PRO, LUXE & TRAILRIDER | 4 Door Ute (Dual Cab) | 2017 – 2021 | 2.8L SC28R150Q5 (VM) |
| LDV T60 | 4 Door Ute (Dual Cab) | 2021 – on | 2.0L SC20M218 (D20) |
| LDV T60 TRAILRIDER 2 | 4 Door Ute (Dual Cab) | 2020 – 2021 | 2.0L SC20M163 (D20) |
Doesn't suit the lower control arms, the rear suspension, the earlier Holden Colorado RC, the new-generation Isuzu D-Max (2020 – on) or MU-X (2021 – on), or the LDV D90. Basco doesn't list them for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco BCA1102: front left upper control arm (also sold on its own)
- Basco BCA1114: front right upper control arm (also sold on its own)
What's in the box
- 1 × Basco BCA1102 front left upper control arm, with ball joint fitted
- 1 × Basco BCA1114 front right upper control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with these arms.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joints and bushes checked at every service, and replace the arms when a ball joint has play or a split boot, or the bushes are cracked, perished or have moved in their housings. Both sides do the same work, so replacing them as a pair keeps the handling even and means you only pay for one wheel alignment.
Signs they're worn
- Clunking or knocking from the front over bumps, potholes, corrugations or speed humps
- Vague or wandering steering, or the vehicle pulling to one side under braking
- Steering wheel shimmy or vibration
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split ball joint boot, or cracked and perished bushes
- Free play in a ball joint when the wheel is rocked top to bottom with the weight off it
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Support the lower control arm with a jack before you separate the upper ball joint, so the coil spring/strut and drive shaft aren't left hanging at full droop.
- Tighten the inner bush bolts with the suspension at ride height (on its wheels or with the hub jacked up to normal height), so the bushes aren't pre-loaded and don't tear.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
- Check the ball joint stud locks into the knuckle properly before you tighten the castle nut, and fit a new split pin.
- Refit the ABS sensor lead and brake hose to the bracket on the arm, clear of the coil spring and tyre.
- On 4x4 models, take care not to damage the CV boot on the front drive shaft while the arm is out.
- Check the lower control arms, sway bar links and outer tie rod ends while you're there. They're easy to do at the same time.
- Get a wheel alignment after replacing the upper control arms.
Do the full job
Also in stock for the Holden Colorado, Colorado 7, Isuzu D-Max and MU-X:
- Basco BCA1102 Front Left Upper Control Arm
- Basco BCA1114 Front Right Upper Control Arm
- Bendix DB1841-UP4WD Ultra Premium 4WD Front Brake Pads (Colorado, D-Max & MU-X)
- Basco FSK440C Filter Service Kit (Colorado RG & Colorado 7 2.8L)
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two upper control arms, each with its ball joint fitted: Basco BCA1102 (front left) and BCA1114 (front right).
Can I buy just one side?
Yes. BCA1102 (left) and BCA1114 (right) are also sold separately.
Does it fit the Colorado, D-Max, MU-X and T60?
Yes. Basco lists both arms for the Holden Colorado RG (2012 – 2020), Colorado 7 (2012 – 2018), Isuzu D-Max TFR/TFS 3.0L (2008 – 2020), MU-X (2013 – 2021) and LDV T60 (2017 – on). Check the fitment table for your model and engine.
Do I need a wheel alignment?
Yes, get one after fitting new control arms. Doing both sides at once means you only need one alignment.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your vehicle serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.