Basco BCA2241 & BCA2242 Front Lower Control Arm Pair (Left & Right) - to suit GWM Cannon Ute 2.0L Diesel (2020 - 2025), Tank 300 & Tank 500
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA2241 + BCA2242 Front Lower Control Arm Pair (Left & Right): GWM Cannon Ute, Tank 300 & Tank 500
Both front lower control arms for the GWM Cannon Ute 2.0L turbo diesel, GWM Tank 300 and Tank 500 Hybrid, in one order, each supplied with its ball joint fitted. You get the Basco BCA2241 front left and BCA2242 front right, so both sides are renewed together and the front end stays balanced. Doing the upper arms too? See the BCA2243 + BCA2244 Front Upper Control Arm Pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: GWM Cannon, Cannon NPW and Cannon Premium NPW Ute 2.0L turbo diesel (2020 – 2025), Tank 300 diesel, petrol & hybrid (2022 – on) and Tank 500 Hybrid (2023 – on), see fitment
- Position: front left and front right lower control arms
- Includes: 1 × Basco BCA2241 (left, passenger side) and 1 × Basco BCA2242 (right, driver side)
- Change them: when a ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Made for the Cannon and Tank: Basco lists BCA2241 (left) and BCA2242 (right) as the front lower control arms for the GWM Cannon Ute range, Tank 300 and Tank 500 Hybrid
- Ball joints fitted: each arm comes with its lower ball joint and bushes already in place
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Better value: cheaper than buying the two arms separately
Specifications
| Spec | BCA2241 (left) | BCA2242 (right) |
|---|---|---|
| Position | Front left lower (passenger side) | Front right lower (driver side) |
| Ball joint | Fitted | Fitted |
| Chassis mounts, outside to outside | 472 mm | 472 mm |
| Chassis mounts (centre) to ball joint mount hole (centre) | 385 mm | 385 mm |
| Finish | Black powder coat | Black powder coat |
Specifications as published by Basco for BCA2241 and BCA2242.
Vehicle fitment
| Model | Body | Engine | Built |
|---|---|---|---|
| GWM Cannon Ute | 4 Door Ute, dual cab wellside | 2.0L turbo diesel (GW4D20) | 2020 – 2024 |
| GWM Cannon Ute NPW | 2 Door Ute, single cab tray | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Cannon Ute NPW | 4 Door Ute, dual cab wellside | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Cannon Premium NPW | 2 Door Ute, single cab tray | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Tank 300 | 4 Door SUV Compact | 2.4L turbo diesel (GW4D24) | 2024 – on |
| GWM Tank 300 | 4 Door SUV Compact | 2.0L turbo petrol (GW4N20) | 2023 – on |
| GWM Tank 300 Hybrid | 4 Door SUV Compact | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 300 Ultra Hybrid | 4 Door SUV Compact | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 500 Hybrid | 4 Door SUV Full-Size | 2.0L turbo petrol hybrid (GW4N20) | 2023 – on |
The Cannon models use the 2.0L GW4D20 turbo diesel. The Tank 300 suits the 2.4L GW4D24 diesel, the 2.0L GW4N20 turbo petrol and the Hybrid / Ultra Hybrid, and the Tank 500 suits the 2.0L Hybrid. Doesn't suit the front upper arms (that's the BCA2243 + BCA2244 pair), the rear suspension, the GWM Cannon Alpha, or other GWM models such as the Haval H6, Jolion or Ora. Basco doesn't list them for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco BCA2241: front left lower control arm (also sold on its own)
- Basco BCA2242: front right lower control arm (also sold on its own)
What's in the box
- 1 × Basco BCA2241 front left lower control arm, with ball joint fitted
- 1 × Basco BCA2242 front right lower control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with these arms.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joints and bushes checked at every service, and replace the arms when a ball joint has play or a split boot, or the bushes are cracked, perished or have moved in their housings. Both sides do the same work, so replacing them as a pair keeps the handling even and means you only pay for one wheel alignment.
Signs they're worn
- Clunking or knocking from the front over bumps, potholes, corrugations or speed humps
- Vague or wandering steering, or the vehicle pulling to one side under braking
- Steering wheel shimmy or vibration
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split ball joint boot, or cracked and perished bushes
- Free play in a ball joint when the wheel is rocked top to bottom with the weight off it
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Tighten the inner bush bolts with the suspension at ride height (on its wheels or with the hub jacked up to normal height), so the bushes aren't pre-loaded and don't tear.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
- Check each ball joint stud locks into the knuckle properly before you tighten the castle nut, and fit a new split pin.
- On 4x4 models, take care not to damage the CV boot on the front drive shaft while the arm is out.
- Check the upper control arms, sway bar links and outer tie rod ends while you're there. They're easy to do at the same time.
- Get a wheel alignment after replacing the lower control arms.
Do the full job
Also in stock for the GWM Cannon and Tank:
- Basco BCA2241 Front Left Lower Control Arm
- Basco BCA2242 Front Right Lower Control Arm
- Basco BCA2243 Front Left Upper Control Arm
- Basco BCA2244 Front Right Upper Control Arm
- Basco BCA2243 + BCA2244 Front Upper Control Arm Pair
- Basco LP9999 Front Left Sway Bar Link (Cannon)
- Basco LP9998 Front Right Sway Bar Link (Cannon)
- Basco LP10015 + LP10016 Front Sway Bar Link Pair (Tank 300 / 500)
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two lower control arms, each with its ball joint fitted: Basco BCA2241 (front left) and BCA2242 (front right).
Can I buy just one side?
Yes. BCA2241 (left) and BCA2242 (right) are also sold separately.
Does it fit both the Cannon and the Tank 300?
Yes. Basco lists both arms for the Cannon, Cannon NPW and Cannon Premium NPW 2.0L diesel, the Tank 300 (2.4L diesel, 2.0L petrol, Hybrid and Ultra Hybrid) and the Tank 500 Hybrid. They aren't listed for the Cannon Alpha.
Do I need a wheel alignment?
Yes, get one after fitting new control arms. Doing both sides at once means you only need one alignment.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your vehicle serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.