Basco BCA2242 Front Right Lower Control Arm (RHS Driver Side) - to suit GWM Cannon Ute 2.0L Diesel (2020 - 2025), Tank 300 & Tank 500
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA2242 Front Right Lower Control Arm: GWM Cannon Ute, Tank 300 & Tank 500
The front right lower control arm for the GWM Cannon Ute 2.0L turbo diesel, GWM Tank 300 and Tank 500 Hybrid, supplied with the ball joint fitted. It locates the bottom of the front right wheel knuckle and carries the lower ball joint, so it keeps your wheel alignment, steering and braking stable, on and off road. In Australia the front right is the driver side. Need the other side? The front left is the Basco BCA2241, or get both sides together in the BCA2241 + BCA2242 pair. Doing the upper arm too? The front right upper arm is the Basco BCA2244.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: GWM Cannon, Cannon NPW and Cannon Premium NPW Ute 2.0L turbo diesel (2020 – 2025), Tank 300 diesel, petrol & hybrid (2022 – on) and Tank 500 Hybrid (2023 – on), see fitment
- Position: front right lower control arm (RHS, driver side)
- Partner part: Basco BCA2241 (front left)
- Change it: when the ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Made for the Cannon and Tank: Basco lists BCA2242 as the front right lower control arm for the GWM Cannon Ute range, Tank 300 and Tank 500 Hybrid
- Ball joint fitted: the arm comes with its lower ball joint and bushes already in place, so there's no pressing an old joint out
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Corrosion protection: Basco says its control arms have a protective powder coating to resist oil, grease and weathering
- Side-specific: left and right are separate part numbers. Order BCA2242 for the front right lower
Specifications
| Part number | Basco BCA2242 |
| Position | Front right lower (RHS, driver side) |
| Ball joint | Fitted |
| Chassis mounts, outside to outside | 472 mm |
| Chassis mounts (centre) to ball joint mount hole (centre) | 385 mm |
| Finish | Black powder coat |
| Quantity | 1 control arm |
Specifications as published by Basco for BCA2242.
Vehicle fitment
| Model | Body | Engine | Built |
|---|---|---|---|
| GWM Cannon Ute | 4 Door Ute, dual cab wellside | 2.0L turbo diesel (GW4D20) | 2020 – 2024 |
| GWM Cannon Ute NPW | 2 Door Ute, single cab tray | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Cannon Ute NPW | 4 Door Ute, dual cab wellside | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Cannon Premium NPW | 2 Door Ute, single cab tray | 2.0L turbo diesel (GW4D20) | 2020 – 2025 |
| GWM Tank 300 | 4 Door SUV Compact | 2.4L turbo diesel (GW4D24) | 2024 – on |
| GWM Tank 300 | 4 Door SUV Compact | 2.0L turbo petrol (GW4N20) | 2023 – on |
| GWM Tank 300 Hybrid | 4 Door SUV Compact | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 300 Ultra Hybrid | 4 Door SUV Compact | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 500 Hybrid | 4 Door SUV Full-Size | 2.0L turbo petrol hybrid (GW4N20) | 2023 – on |
The Cannon models use the 2.0L GW4D20 turbo diesel. The Tank 300 suits the 2.4L GW4D24 diesel, the 2.0L GW4N20 turbo petrol and the Hybrid / Ultra Hybrid, and the Tank 500 suits the 2.0L Hybrid. Doesn't suit the front left (that's Basco BCA2241), the front right upper arm (that's Basco BCA2244), the rear suspension, the GWM Cannon Alpha, or other GWM models such as the Haval H6, Jolion or Ora. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco BCA2242 front right lower control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with this arm. Need both sides? The front lower pair includes BCA2241 and BCA2242, or add the front left Basco BCA2241 on its own.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joint and bushes checked at every service, and replace the arm when the ball joint has play or a split boot, or the bushes are cracked, perished or have moved in their housings. Utes and 4x4s that tow, carry heavy loads, run lift kits or go off road work their front ends hard, and a hard hit on a rock, kerb or pothole can bend an arm. Because the ball joint is part of the arm, a worn joint usually means replacing the whole arm.
Signs it's worn
- Clunking or knocking from the front over bumps, potholes, corrugations or speed humps
- Vague or wandering steering, or the vehicle pulling to one side under braking
- Steering wheel shimmy or vibration
- Uneven or rapid wear on the inside or outside edge of the front tyre
- A split ball joint boot, or cracked and perished bushes
- Free play in the ball joint when the wheel is rocked top to bottom with the weight off it
Fitting tips
- Tighten the inner bush bolts with the suspension at ride height (on its wheels or with the hub jacked up to normal height), so the bushes aren't pre-loaded and don't tear.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
- Check the ball joint stud locks into the knuckle properly before you tighten the castle nut, and fit a new split pin.
- On 4x4 models, take care not to damage the CV boot on the front drive shaft while the arm is out.
- Check the upper control arms, sway bar links and outer tie rod ends while you're there. They're easy to do at the same time.
- Get a wheel alignment after replacing a lower control arm.
Do the full job
Also in stock for the GWM Cannon and Tank:
- Basco BCA2241 Front Left Lower Control Arm
- Basco BCA2241 + BCA2242 Front Lower Control Arm Pair
- Basco BCA2243 Front Left Upper Control Arm
- Basco BCA2244 Front Right Upper Control Arm
- Basco BCA2243 + BCA2244 Front Upper Control Arm Pair
- Basco LP9999 Front Left Sway Bar Link (Cannon)
- Basco LP9998 Front Right Sway Bar Link (Cannon)
- Basco LP10015 + LP10016 Front Sway Bar Link Pair (Tank 300 / 500)
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right arm?
BCA2242 is the front right lower (driver side in Australia). The front left lower is Basco BCA2241.
Is this the upper or the lower arm?
BCA2242 is the lower arm. The front right upper arm is Basco BCA2244.
Does it come with the ball joint?
Yes. The lower ball joint and bushes come fitted to the arm. Basco doesn't list any mounting bolts or nuts in the box.
Does it fit both the Cannon and the Tank 300?
Yes. Basco lists BCA2242 for the Cannon, Cannon NPW and Cannon Premium NPW 2.0L diesel, the Tank 300 (2.4L diesel, 2.0L petrol, Hybrid and Ultra Hybrid) and the Tank 500 Hybrid. It isn't listed for the Cannon Alpha.
Should I replace both sides?
It's a good idea if the vehicle has done big kilometres, because both arms do the same work and wear at a similar rate. The BCA2241 + BCA2242 pair works out cheaper than two singles. If only one side is worn or damaged, replacing that side is fine.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your vehicle serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.