Basco BJ1004 Front Lower Ball Joint Kit Pair (Front Left & Right) - to suit BYD Atto 3 BEV (2021 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BJ1004 Front Lower Ball Joint Kit Pair (Front Left & Right): BYD Atto 3 BEV (2021 – on)
Both front lower ball joint kits for the BYD Atto 3 electric SUV, in one order. The Basco BJ1004 fits either front lower control arm, left or right, so this pair is 2 × BJ1004 and covers both sides of the front axle. It restores precise steering and stops the clunking that worn lower ball joints make.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: BYD Atto 3 BEV (2021 – on), see fitment
- Position: front lower, left and right (the same kit fits either side)
- Includes: 2 × Basco BJ1004 front lower ball joint kit
- Change them: when there's play in the joint, a torn boot, or clunking over bumps or under braking (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both front sides in one box: one part number fits left and right, so a pair covers the whole front axle
- Heavy-duty build: heavy-duty forged steel construction with a precision ball stud
- Sealed dust boot: keeps grit and water out of the joint
- One alignment: doing both sides at once means one wheel alignment afterwards, not two
Specifications
| Part number | Basco BJ1004 (× 2) |
| Brand | Basco |
| Position | Front lower, left or right |
| Quantity | 2 ball joint kits |
Specifications as published by Basco for BJ1004.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| BYD Atto 3 BEV | Electric (no engine code) | 2021 – on |
Doesn't suit other BYD models. Basco lists BJ1004 for the Atto 3 front lower control arm.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco BJ1004: front lower control arm ball joint kit, left or right (also sold on its own)
What's in the box
- 2 × Basco BJ1004 front lower ball joint kit
When to replace
Ball joints don't have a fixed replacement interval. Replace a lower ball joint if there's play in the joint, the boot is torn, you hear clunking over bumps or when braking, or the steering feels loose.
Both lower ball joints carry the same load and wear at a similar rate. Replacing them as a pair means one job and one wheel alignment.
Signs they're worn
- Clunking from the front over bumps or when braking
- Loose or wandering steering
- Uneven wear on the front tyres
- A torn or split ball joint boot
- Play you can feel when a front wheel is rocked top to bottom (at 12 and 6 o'clock) with the car raised
Fitting tips
- Support the vehicle on stands and use the correct ball joint separator tool.
- Do one side at a time.
- Use new nuts or bolts where specified and tighten to the torque in your workshop manual.
- Get a professional wheel alignment straight after fitting.
Do the full job
Also in stock for the BYD Atto 3:
- Basco LP10000 Front Sway Bar Link Pair
- Basco TE10021 & TE10020 Outer Tie Rod End Pair
- Basco WBH1879 Front Wheel Hub
- Bendix DB2732-EV Front Brake Pads
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right ball joint?
Both. BJ1004 fits either front lower control arm, so this pair gives you one for each side.
Do I need to replace both sides?
Not always. Only a worn joint needs replacing, and the single BJ1004 is there if you only need one. If both have play or torn boots, the pair works out cheaper than two singles.
Do I need a wheel alignment after fitting?
Yes. Book an alignment straight after fitting to protect your tyres.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.