Basco TE10021 & TE10020 Outer Tie Rod End Pair (Front Left & Right) - to suit BYD Atto 3 Standard & Extended Range EV (2021 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE10021 + TE10020 Outer Tie Rod End Pair (Front Left & Right): BYD Atto 3 EV (2021 – on)
Both front outer tie rod ends for the BYD Atto 3 Standard Range and Extended Range electric SUV, in one order. You get the Basco TE10021 front left (passenger side) and the Basco TE10020 front right (driver side), so both sides of the steering are renewed together, ready for a single wheel alignment.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: BYD Atto 3 Standard Range and Extended Range, 4-door compact SUV, electric (2021 – on)
- Position: front left and front right, outer tie rod ends
- Includes: 1 × Basco TE10021 (left) and 1 × Basco TE10020 (right)
- Change them: when there's play, a split or leaking boot, or uneven tyre wear (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one box: a matched left and right, so you don't have to order two part numbers
- Made for the Atto 3: Basco lists TE10021 (front left) and TE10020 (front right) specifically for the Atto 3 Standard and Extended
- Direct replacement: built as direct replacements, so no modification is needed (Basco)
- One alignment: doing both sides at once means one wheel alignment afterwards, not two
Specifications
| Spec | TE10021 (left) | TE10020 (right) |
|---|---|---|
| Position | Front left, outer | Front right, outer |
| Overall length | 163 mm | 163 mm |
| Cone (taper) | 12.5 mm | 12.5 mm |
| Thread (tie rod) | M14 x 1.5 | M14 x 1.5 |
| Thread (ball stud) | M12 x 1.25 | M12 x 1.25 |
Specifications as published by Basco for TE10021 and TE10020.
Vehicle fitment
| Model | Body | Built |
|---|---|---|
| BYD Atto 3 Standard Range | 4 Door SUV Compact | 2021 – on |
| BYD Atto 3 Extended Range | 4 Door SUV Compact | 2021 – on |
Both are battery-electric (no engine code). Doesn't suit other BYD models: Basco lists these parts for the Atto 3 only, not the Dolphin, Seal or others.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco TE10021: front left outer tie rod end (also sold on its own)
- Basco TE10020: front right outer tie rod end (also sold on its own)
What's in the box
- 1 × Basco TE10021 outer tie rod end, front left
- 1 × Basco TE10020 outer tie rod end, front right
When to replace
Tie rod ends don't have a fixed replacement interval. Have the steering joints checked at every service and replace a tie rod end if there's free play in the ball joint, the rubber boot is split or leaking grease, or the vehicle fails a roadworthy inspection on steering play.
Both sides do the same work, so when one is worn the other is often close behind. Replacing them as a pair means one job and one alignment.
Signs they're worn
- Knocking or clunking from the front when steering or driving over bumps
- Loose or vague steering, or the car wandering on the road
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split, torn or greasy rubber boot on a tie rod end
- Play you can feel when a front wheel is rocked side to side (at 9 and 3 o'clock) with the car raised
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Before removing each old end, count the turns or measure its position on the tie rod so the new one goes back close to the same toe setting.
- Use a proper ball joint separator. Don't hammer on the threads or the boot.
- Torque the lock nuts and ball stud nuts to the figures in your workshop manual.
- Get a professional wheel alignment straight after fitting, because replacing tie rod ends always changes the toe.
Do the full job
Also in stock for the BYD Atto 3:
- Basco BJ1004 Front Lower Ball Joint Kit
- Basco LP10000 Front Sway Bar Link
- Basco WBH1879 Front Wheel Bearing Hub
- Bendix DB2732-EV Front Brake Pads
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Which side is which?
TE10021 is the front left (passenger side on an Australian right-hand drive Atto 3) and TE10020 is the front right (driver's side).
Do I need a wheel alignment after fitting?
Yes. Replacing tie rod ends changes the toe setting, so book an alignment straight after to protect your tyres.
Can I buy just one side?
Yes: TE10021 (left) and TE10020 (right) are also sold individually.
Will non-genuine parts void my new-car warranty?
No, not on their own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.