Basco DCB1030 drive shaft centre support bearing, 30mm bearing in rubber mount with bolt-down bracket, to suit GWM Cannon Ute 2.0L diesel (2020-2025) & Holden Rodeo RA (2003-2008)

Basco DCB1030 Drive Shaft Centre Support Bearing (30mm) - to suit GWM Cannon Ute 2.0L Diesel (2020 - 2025) & Holden Rodeo RA (2003 - 2008)

$44.95 AUD
Skip to product information
Basco DCB1030 drive shaft centre support bearing, 30mm bearing in rubber mount with bolt-down bracket, to suit GWM Cannon Ute 2.0L diesel (2020-2025) & Holden Rodeo RA (2003-2008)

Basco DCB1030 Drive Shaft Centre Support Bearing (30mm) - to suit GWM Cannon Ute 2.0L Diesel (2020 - 2025) & Holden Rodeo RA (2003 - 2008)

$44.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco DCB1030 Drive Shaft Centre Support Bearing: GWM Cannon Ute 2.0L Diesel (2020 – 2025) & Holden Rodeo RA (2003 – 2008)

A replacement drive shaft (tailshaft) centre support bearing for the GWM Cannon Ute 2.0L turbo diesel and selected Holden Rodeo RA utes. It holds the middle of the two-piece rear tailshaft in place under the floor, and soaks up driveline vibration so the shaft runs smooth and quiet. Got a Great Wall V200 or V240? You need the Basco DCB1018 instead.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: GWM Ute Cannon (2020 – 2024), Cannon NPW and Cannon Premium NPW (2020 – 2025) 2.0L diesel, and Holden Rodeo RA single cab (2003 – 2008) and dual cab 3.0L diesel (2003 – 2007), see fitment
  • Position: centre of the two-piece rear tailshaft (drive shaft)
  • Size: 30 mm bearing bore, 94 mm mounting bolt centres, 100 mm centre height
  • Change it: when you get a driveline shudder or vibration, a rumble from under the floor, or the rubber is cracked (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Made for the Cannon and Rodeo RA: Basco lists DCB1030 for the GW4D20 diesel Cannon and the Rodeo RA models below
  • Bearing and mount in one: the bearing comes already fitted in its rubber mount and bolt-down bracket
  • Built to OE specifications: Basco says its centre bearings are built to OEM specifications as direct replacements

Specifications

Part number Basco DCB1030
Barcode (EAN) 9356247012292
Position Rear tailshaft, centre support
Bearing inside diameter 30 mm
Mounting bolt centre to centre 94 mm
Bearing centre height 100 mm
Quantity 1 bearing

Specifications as published by Basco for DCB1030.

Vehicle fitment

Model Engine Built
GWM Ute Cannon, dual cab ute (wellside) 2.0L turbo diesel (GW4D20) 2020 – 2024
GWM Ute Cannon NPW, single cab tray 2.0L turbo diesel (GW4D20) 2020 – 2025
GWM Ute Cannon NPW, dual cab ute (wellside) 2.0L turbo diesel (GW4D20) 2020 – 2025
GWM Ute Cannon Premium NPW, single cab tray 2.0L turbo diesel (GW4D20) 2020 – 2025
Holden Rodeo RA, single cab utility 3.0L turbo diesel (4JH1TC) 2003 – 2007
Holden Rodeo RA, single cab utility 3.0L turbo diesel (4JJ1-TCX) 2007 – 2008
Holden Rodeo RA, single cab utility 2.4L petrol (C24SE) 2003 – 2005
Holden Rodeo RA, single cab utility 2.4L petrol (Y24SE) 2005 – 2008
Holden Rodeo RA, single cab utility 3.5L V6 petrol (6VE1) 2003 – 2005
Holden Rodeo RA, single cab utility 3.6L V6 petrol (LCA / H9) 2005 – 2008
Holden Rodeo RA, dual cab utility 3.0L turbo diesel (4JH1TC) 2003 – 2007

Basco lists the Cannon as both "GWM Cannon Ute" and "GWM Ute Cannon". Only fits vehicles with a two-piece tailshaft that has a centre bearing. Check the centre height: DCB1030 has a 100 mm centre height. Some Rodeo and other ute centre bearings use the same 30 mm bore and 94 mm bolt centres but a lower (85 mm) height, so a bearing that looks similar may not sit at the right height. Measure your old one. Doesn't suit the Great Wall V200 / V240 (see DCB1018). It isn't listed for the Cannon Alpha, the Holden Colorado, or Rodeo RA body styles and engines not shown above.

Not 100% sure? Measure your old bearing (30 mm bore, 94 mm bolt centres, 100 mm centre height), or send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco DCB1030 drive shaft centre support bearing (bearing fitted in its rubber mount and bracket)

When to replace

Centre bearings don't have a fixed replacement interval. Replace it when the rubber mount is cracked, perished or torn, the bearing is rough or noisy, or you feel a shudder through the floor when taking off or under load. Water crossings, mud, heavy loads and towing all wear centre bearings faster.

Signs it's worn

  • A shudder or vibration through the floor when taking off, especially loaded or towing
  • A rumble, whine or squeal from under the middle of the vehicle that rises with speed
  • A clunk when shifting between drive and reverse, or on and off the throttle
  • Cracked, sagging or torn rubber around the bearing, or play in the tailshaft at the centre

Fitting tips

  • Mark the tailshaft halves and flanges before you split them, so they go back in the same phase and balance.
  • Support the shaft while you unbolt the centre bearing so it doesn't hang off the universal joints.
  • A press and the right puller make removing the old bearing from the shaft much easier. If in doubt, a driveline shop can press it on.
  • On a lifted Cannon, take-off vibration can come from the tailshaft angle rather than a worn bearing, so check that before you blame the bearing.
  • Torque the mounting bolts and flange bolts as per your workshop manual, then road test for vibration.

Do the full job

Also in stock for the GWM Cannon 2.0L diesel:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the front or rear tailshaft?
It's the centre support bearing on the two-piece rear tailshaft.

Does it come with the rubber mount and bracket?
Yes. The bearing comes already fitted in its rubber mount and bracket, ready to press onto the shaft.

Does it fit my Holden Rodeo RA?
Basco lists it for the RA single cab utility with the engines shown in the fitment table, and the RA dual cab with the 3.0L 4JH1TC diesel (2003 – 2007). For any other RA, send us your rego or VIN and we'll check.

How do I check it's the right one?
Measure your old bearing: 30 mm inside diameter, 94 mm between the mounting bolt centres and 100 mm centre height. Or send us your rego or VIN.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like