Basco LP10017 Rear Sway Bar Link (Left or Right) - to suit GWM Tank 300 (2022 - On) & Tank 500 (2023 - On) 2.0L Petrol / Hybrid & 2.4L Diesel
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco LP10017 Rear Sway Bar Link: GWM Tank 300 & Tank 500 (2022 – on)
The rear sway bar (anti-roll bar) link for the GWM Tank 300 and Tank 500, in petrol, hybrid and 2.4L diesel models. It connects the rear sway bar to the rear axle to keep body roll in check. The same link fits the left or right side, and it's sold individually, so order two to do both sides. Doing the front too? The front links are the LP10015 + LP10016 pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: GWM Tank 300 (2022 – on) and Tank 500 (2023 – on), see fitment
- Position: rear sway bar link, fits left or right
- Sold: individually (1 link). Order 2 for both rear sides
- Change it: when the ball joints knock or have play, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Made for the Tank range: Basco lists LP10017 as the rear sway bar link for the Tank 300 and Tank 500
- Fits either side: one part number for rear left and rear right, so there's no mixing up sides
- Nuts supplied: comes with its ball stud nuts and washers, as pictured
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco LP10017 |
| Position | Rear, left or right |
| Quantity | 1 link (sold individually) |
Specifications as published by Basco for LP10017.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| GWM Tank 300 Hybrid | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 300 Ultra Hybrid | 2.0L turbo petrol hybrid (GW4N20) | 2022 – on |
| GWM Tank 300 | 2.0L turbo petrol (GW4N20) | 2023 – on |
| GWM Tank 300 | 2.4L turbo diesel (GW4D24) | 2024 – on |
| GWM Tank 500 Hybrid | 2.0L turbo petrol hybrid (GW4N20) | 2023 – on |
| GWM Tank 500 Hi4-T Ultra | 2.0L turbo petrol PHEV (GW4N20) | 2025 – on |
The Tank 300 is a 4-door compact SUV and the Tank 500 a 4-door full-size SUV. Doesn't suit the front of the vehicle (that's the LP10015 + LP10016 pair) or other GWM models such as the Cannon or Haval. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco LP10017 rear sway bar link, with nuts
Sold individually. Replacing both rear links? Add 2 to your cart.
When to replace
Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split. Off-road use, towing and corrugated roads wear them faster, and when one side is worn the other is often close behind.
Signs it's worn
- Knocking, clunking or rattling from the rear over bumps, potholes or speed humps
- More body roll or a loose, wallowy feel in corners
- A split or torn ball joint boot, or grease leaking from it
- Free play in the ball joints when the link is checked by hand with the weight off the bar
Fitting tips
- Fit with the vehicle on its wheels or with both sides of the rear axle supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
- Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nut, so the ball joint doesn't spin.
- Use new nuts and torque them to the figure in your workshop manual.
- Check the rear sway bar bushes while you're there and replace them if they're perished.
- A wheel alignment isn't normally needed after replacing sway bar links.
Do the full job
Also in stock for the GWM Tank 300 / Tank 500:
- Basco LP10015 + LP10016 Front Sway Bar Link Pair
- Basco LP10015 Front Left Sway Bar Link
- Basco LP10016 Front Right Sway Bar Link
- Basco BCA2241 + BCA2242 Front Lower Control Arm Pair
- Basco BCA2243 + BCA2244 Front Upper Control Arm Pair
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right link?
Either. LP10017 fits the rear left and the rear right.
How many do I need?
It's sold individually. Order 2 to replace both rear links.
Does it fit the front?
No, it's a rear link. The front links are side-specific: LP10015 (left) and LP10016 (right), or the front pair.
Does it fit the Tank 300 diesel?
Yes. Basco lists it for the 2.4L diesel Tank 300 (2024 – on) as well as the 2.0L petrol and hybrid models.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.