Basco LP10018 Front Sway Bar Link Pair (Left & Right) - to suit GWM Haval Jolion 1.5L Petrol & Hybrid (2021 - On) & GWM Ora (2023 - 2025)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco LP10018 Front Sway Bar Link Pair (Front Left & Right): GWM Haval Jolion & Ora (2021 – on)
Both front sway bar links for the GWM Haval Jolion 1.5L petrol and hybrid, and the GWM Ora electric hatch, in one order. The Basco LP10018 fits either front side, left or right, so this pair is 2 × LP10018 and covers both ends of the front sway bar. It keeps body roll in check and stops the knocking that worn links make over bumps.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: GWM Haval Jolion 1.5L petrol and hybrid (2021 – on) and GWM Ora ES11 (2023 – 2025), see fitment
- Position: front, left and right (the same link fits either side)
- Includes: 2 × Basco LP10018 front sway bar link
- Change them: when the ball joints knock or have play, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both front sides in one box: one part number fits left and right, so a pair covers the whole front sway bar
- Made for the Jolion and Ora: Basco lists LP10018 as the front sway bar link for the Haval Jolion and Ora ES11
- Built to OE specifications: Basco says its suspension parts are made to OE specifications as direct replacements, so no modification is needed
- Even feel: replacing both sides at once gives a balanced, quiet front end
Specifications
| Part number | Basco LP10018 (× 2) |
| Position | Front, left or right |
| Length | 294 mm |
| Quantity | 2 sway bar links |
Specifications as published by Basco for LP10018.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| GWM Haval Jolion | 1.5L petrol (GW4G15K) | 2021 – on |
| GWM Haval Jolion | 1.5L petrol (GW4B15A) | 2022 – on |
| GWM Haval Jolion Hybrid | 1.5L petrol hybrid (GW4B15H) | 2022 – on |
| GWM Ora ES11 | Electric | 2023 – 2025 |
| GWM Ora Standard Range ES11 | Electric | 2023 – 2025 |
| GWM Ora Extended Range ES11 | Electric | 2023 – 2025 |
The Jolion is a 4-door compact SUV and the Ora a 4-door hatchback. Doesn't suit the rear sway bar (Basco lists separate rear links for the Jolion) or other GWM models such as the Haval H6, Cannon or Tank.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco LP10018: front sway bar link, left or right (also sold on its own)
What's in the box
- 2 × Basco LP10018 front sway bar link
When to replace
Sway bar links don't have a fixed replacement interval. Have them checked at every service and replace a link when its ball joints have play or knock, or its boot is split.
Both front links do the same work and wear at a similar rate, so when one is gone the other is usually close behind. Replacing them as a pair gives an even feel and saves doing the job twice.
Signs they're worn
- Knocking, clunking or rattling from the front over bumps, potholes or speed humps
- More body roll or a loose, wallowy feel in corners
- A split or torn ball joint boot, or grease leaking from it
- Free play in the ball joints when a link is checked by hand with the weight off the bar
Fitting tips
- Fit with the vehicle on its wheels or with both sides of the suspension supported at ride height, so the sway bar isn't pre-loaded when you tighten the nuts.
- Hold the ball stud with the hex or Torx in the end of the stud while undoing and tightening the nyloc nut, so the ball joint doesn't spin.
- Use new nuts and torque them to the figure in your workshop manual.
- A wheel alignment isn't normally needed after replacing sway bar links.
Do the full job
Also in stock for the GWM Haval Jolion:
- Basco ABS1000 Front ABS Sensor Pair
- Basco ABS1001 Rear ABS Sensor Pair
- Basco TE10011 Outer Tie Rod End LHS
- Basco BSM1293 Starter Motor
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right link?
Both. LP10018 fits either front side, so this pair gives you one for each side.
Do I need to replace both sides?
Not always. Only a worn link needs replacing, and the single LP10018 is there if you only need one. If both are knocking or the boots are split, the pair works out cheaper than two singles.
Does it fit the Ora?
Yes. Basco lists LP10018 for the GWM Ora ES11, including the Standard Range and Extended Range (2023 – 2025).
Do I need a wheel alignment?
No, sway bar links don't affect alignment. Have it checked if other steering or suspension parts were replaced at the same time.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.