Basco RE10008 Inner Rack End Pair (Front Left & Right) - to suit Chery Omoda 5 1.5L Turbo (12/2022 - 04/2025)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco RE10008 Inner Rack End Pair (Front Left & Right): Chery Omoda 5 1.5L Turbo (12/2022 – 04/2025)
Both steering inner rack ends for the Chery Omoda 5 1.5L turbo, in one order. The Basco RE10008 fits either side of the steering rack, left or right, so this pair is 2 × RE10008 and covers both sides. It restores precise steering and takes the play out of worn inner tie rods.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Chery Omoda 5 (BX, EX, FX) 1.5L turbo (12/2022 – 04/2025), see fitment
- Position: front inner, left and right (the same rack end fits either side)
- Includes: 2 × Basco RE10008 inner rack end
- Change them: when there's play in the inner joint, vague steering or uneven tyre wear (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one box: one part number fits left and right, so a pair covers the whole steering rack
- Direct OE replacement: built as a direct replacement, so no modification is needed
- Strong build: forged high-grade steel
- One alignment: doing both sides at once means one wheel alignment afterwards, not two
Specifications
| Part number | Basco RE10008 (× 2) |
| Brand | Basco |
| Position | Front inner, left or right |
| Quantity | 2 inner rack ends |
Specifications as published by Basco for RE10008.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Chery Omoda 5 (BX, EX, FX) | 1.5L Turbo (SQRE4T15C) | 12/2022 – 04/2025 |
Doesn't include the outer tie rod ends. Those are side-specific: TE10009 (left) and TE10010 (right).
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco RE10008: steering inner rack end, left or right (also sold on its own)
What's in the box
- 2 × Basco RE10008 inner rack end
When to replace
Inner rack ends don't have a fixed replacement interval. Replace one if there's play in the inner joint, the rack boot is split, the steering feels vague or wanders, you hear a clunk over bumps, or your tyres are wearing unevenly on the edges.
Both inner rack ends do the same work, so when one is worn the other is often close behind. Replacing them as a pair means one job and one alignment.
Signs they're worn
- Clunking or knocking from the front when steering or over bumps
- Loose or vague steering, or the car wandering on the road
- Uneven wear on the inside or outside edge of the front tyres
- A split or leaking steering rack boot
- Play you can feel when a front wheel is rocked side to side (at 9 and 3 o'clock) with the car raised
Fitting tips
- Do one side at a time so the rack boots and clamps go back in the right place.
- Count the turns (or measure) when removing the outer tie rod end so it goes back close to the original toe setting.
- Fit new rack boot clamps and tighten the inner joint to the torque in your workshop manual.
- Get a professional wheel alignment straight after fitting.
Do the full job
Also in stock for the Chery Omoda 5:
- Basco TE10009 Outer Tie Rod End LHS
- Basco TE10010 Outer Tie Rod End RHS
- Basco WBH1871 Rear Wheel Hub
- Basco WP9002 Water Pump
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right rack end?
Both. RE10008 fits either side of the steering rack, so this pair gives you one for each side.
Do I need to replace both sides?
Not always. Only a worn rack end needs replacing, and the single RE10008 is there if you only need one. If both have play, the pair works out cheaper than two singles.
Do I need a wheel alignment after fitting?
Yes. Any change to the steering arms alters your toe setting, so get an alignment done straight after.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.