Basco TE10021 Outer Tie Rod End - Front Left Hand Side (LHS Passenger Side) - to suit BYD Atto 3 Standard & Extended Range EV (2021 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE10021 Outer Tie Rod End, Front Left: BYD Atto 3 EV (2021 – on)
The front left (passenger side) outer tie rod end for the BYD Atto 3 Standard Range and Extended Range electric SUV. It's the ball joint that connects the steering rack's tie rod to the front left steering knuckle, so it directly affects steering feel, tyre wear and your wheel alignment.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: BYD Atto 3 Standard Range and Extended Range, 4-door compact SUV, electric (2021 – on)
- Position: front left (LHS, passenger side), outer tie rod end
- Pair: the front right is Basco TE10020, or buy both as a left & right pair
- Change it: when there's play, a split or leaking boot, or uneven tyre wear (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Made for the Atto 3: Basco lists TE10021 specifically for the Atto 3 Standard and Extended, front left
- Direct replacement: built as a direct replacement, so no modification is needed (Basco)
- OE specifications: Basco says its steering range is designed to meet OE specifications
- Matched pair available: the right-hand TE10020 has the same published length, cone and threads
Specifications
| Part number | TE10021 |
| Brand | Basco |
| Position | Front left, outer |
| Overall length | 163 mm |
| Cone (taper) size | 12.5 mm |
| Thread (tie rod) | M14 x 1.5 |
| Thread (ball stud) | M12 x 1.25 |
| Vehicle | BYD Atto 3 (electric) |
Specifications as published by Basco for TE10021.
Vehicle fitment
| Model | Body | Built |
|---|---|---|
| BYD Atto 3 Standard Range | 4 Door SUV Compact | 2021 – on |
| BYD Atto 3 Extended Range | 4 Door SUV Compact | 2021 – on |
Both are battery-electric (no engine code). Doesn't suit the front right side: you need Basco TE10020 for that. Basco lists TE10021 for the Atto 3 only, not the Dolphin, Seal or other BYD models.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco TE10021: front left outer tie rod end (this part)
- Basco TE10020: front right outer tie rod end (the matching right side)
- TE10021 + TE10020 pair: both sides in one order
What's in the box
- 1 × Basco TE10021 outer tie rod end, front left
When to replace
Tie rod ends don't have a fixed replacement interval. Have the steering joints checked at every service and replace the tie rod end if there's free play in the ball joint, the rubber boot is split or leaking grease, or the vehicle fails a roadworthy inspection on steering play.
Tie rod ends wear with use, so if one side is worn, have the other side checked too.
Signs it's worn
- Knocking or clunking from the front when steering or driving over bumps
- Loose or vague steering, or the car wandering on the road
- Uneven or rapid wear on the inside or outside edge of the front left tyre
- A split, torn or greasy rubber boot on the tie rod end
- Play you can feel when the wheel is rocked side to side (at 9 and 3 o'clock) with the car raised
Fitting tips
- Before removing the old end, count the turns or measure its position on the tie rod so the new one goes back close to the same toe setting.
- Use a proper ball joint separator. Don't hammer on the threads or the boot.
- Torque the lock nut and the ball stud nut to the figures in your workshop manual.
- Get a professional wheel alignment straight after fitting, because replacing a tie rod end always changes the toe.
Do the full job
Also in stock for the BYD Atto 3:
- Basco BJ1004 Front Lower Ball Joint Kit
- Basco LP10000 Front Sway Bar Link
- Basco WBH1879 Front Wheel Bearing Hub
- Bendix DB2732-EV Front Brake Pads
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the driver or passenger side?
It's the front left, which is the passenger side on an Australian (right-hand drive) Atto 3. The driver's side (front right) is Basco TE10020.
Do I need a wheel alignment after fitting?
Yes. Any tie rod end replacement changes the toe setting, so book an alignment straight after to protect your tyres.
Should I replace both sides?
Only if the other side is worn too, but it's worth having it checked while the car is in. If you're doing both, the left & right pair works out cheaper than two singles.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.