Basco TE2754 Left Outer Tie Rod End (LHS) - to suit Toyota LandCruiser 78 & 79 Series (1999 - 2022)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE2754 Left Outer Tie Rod End (LHS): Toyota LandCruiser 78 & 79 Series
The left outer tie rod end for the Toyota LandCruiser 78 Series Troop Carrier and 79 Series cab chassis, 1999 – 2022, with the 4.5L petrol, 4.2L diesel and 4.5L V8 turbo diesel. It sits on the end of the steering tie rod, so it carries every steering input to the front wheel. Basco's resellers list TE2754 as the left outer tie rod end. In Australia the left is the passenger side.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota LandCruiser 78 & 79 Series FZJ, HDJ, HZJ and VDJ (1999 – 2022), see fitment
- Position: left outer tie rod end (LHS, passenger side)
- Includes: tie rod end with nut and split pin, as pictured
- Sold: individually. This is the left side only
- Change it: when it has play or knocks, or its boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Side-specific: made for the left outer position. Order TE2754 for the left
- Nut and split pin supplied: as pictured
- Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco TE2754 |
| Position | Left outer (LHS, passenger side) |
| Quantity | 1 tie rod end with nut and split pin |
Fitment as published by Basco. Side as published by Basco's resellers for TE2754.
Vehicle fitment
Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Toyota LandCruiser FZJ78R | Troop Carrier | 4.5L 1FZ-FE petrol | 1999 – 2001 |
| Toyota LandCruiser FZJ79R | Cab Chassis | 4.5L 1FZ-FE petrol | 1999 – 2007 |
| Toyota LandCruiser HDJ78R / HDJ79R | Troop Carrier & Cab Chassis | 4.2L 1HD-FTE turbo diesel | 2001 – 2007 |
| Toyota LandCruiser HZJ78R / HZJ79R | Troop Carrier & Cab Chassis | 4.2L 1HZ diesel | 1999 – 2001 |
| Toyota LandCruiser VDJ78R / VDJ79R (incl. Workmate) | Troop Carrier & Cab Chassis | 4.5L 1VD-FTV V8 turbo diesel | 2007 – 2022 |
Not listed for the LandCruiser GRJ79R 4.0L petrol, the 70 Series before 1999, the 76 Series wagon or the 2023 – on 70 Series. Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco TE2754 left outer tie rod end
- 1 × nut
- 1 × split pin
Sold individually. This is the left side only. Need the right? Give the HOOROO Crew a coo-ee and we'll help.
When to replace
Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.
Signs it's worn
- Play or a clunk in the steering, especially over bumps or when turning
- Wandering on the highway or the vehicle pulling to one side
- Uneven wear on the inside or outside edge of the front tyres
- A split tie rod end boot, or play in the joint when it's checked by hand
Fitting tips
- Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
- Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
- Get a wheel alignment after replacing a tie rod end.
Do the full job
Also in stock for the LandCruiser 78 & 79 Series:
- Basco TE995 Left Inner Tie Rod End
- Basco TE997 Right Inner Tie Rod End
- Basco TE995 + TE997 Inner Tie Rod End Pair
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right?
Left. Basco's resellers list TE2754 as the left outer tie rod end. In Australia that's the passenger side.
Is this the inner or the outer tie rod?
Outer. TE2754 is the outer tie rod end that bolts to the steering knuckle.
Does it fit the GRJ79 4.0L petrol?
It isn't confirmed by Basco's second source, so check with us first.
Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.