Basco TE9983L Left Outer Tie Rod End (LHS) - to suit Hyundai Elantra MD, i30 GD, Veloster FS & Kia Soul PS (2011 - 2020)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE9983L Left Outer Tie Rod End (LHS): Hyundai Elantra MD, i30 GD, Veloster FS & Kia Soul PS
The left outer tie rod end for the Hyundai Elantra MD, i30 GD (incl. Tourer diesel), Veloster FS and Kia Soul Si PS, 2011 – 2020. It joins the inner rack end to the steering knuckle, so it carries every steering input to the front wheel. Basco and its reseller list TE9983L as the left, with Basco TE9983R as the matching right. In Australia the left is the passenger side. Need both? Get them together in the TE9983L + TE9983R pair.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Hyundai Elantra MD (2011 – 2016), i30 GD / GDe incl. Tourer diesel (2012 – 2017), Veloster FS (2012 – 2019) and Kia Soul Si PS (2014 – 2020), see fitment
- Position: left outer tie rod end (LHS, passenger side)
- Partner part: Basco TE9983R (right outer)
- Includes: tie rod end and castle nut, as pictured
- Change it: when it has play or knocks, or its boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Side-specific: left and right are separate part numbers. Order TE9983L for the left
- Castle nut supplied: comes with its castle nut, as pictured
- Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco TE9983L |
| Position | Left outer (LHS, passenger side) |
| Quantity | 1 tie rod end with castle nut |
Fitment as published by Basco. Side as published by Basco (part number suffix) and its reseller for TE9983L.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Hyundai Elantra MD (incl. Active) | 4 Door Sedan | 1.8L G4NB petrol | 2011 – 2016 |
| Hyundai i30 GD (Active, Elite, Premium, Trophy, SE, Active X) | 4 Door Hatch | 1.8L G4NB petrol | 2012 – 2017 |
| Hyundai i30 GD (Active, Elite, Premium) | 4 Door Hatch | 1.6L D4FB diesel | 2012 – 2017 |
| Hyundai i30 Tourer 1.6 CRDi GD / GDe (Active, Elite) | 4 Door Wagon | 1.6L D4FB diesel | 2012 – 2016 |
| Hyundai Veloster FS | 3 Door Coupe | 1.6L G4FD petrol | 2012 – 2019 |
| Hyundai Veloster SR Turbo FS | 3 Door Coupe | 1.6L G4FJ turbo petrol | 2012 – 2019 |
| Kia Soul Si PS | 4 Door Hatch | 2.0L G4NA petrol | 2014 – 2020 |
Doesn't suit the i30 SR (2.0L G4NC), the 1.6L petrol i30 and i30 Tourer, the i30 FD or PD, the Elantra HD / AD, or other Kia Soul models. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco TE9983L left outer tie rod end
- 1 × castle nut
Need both sides? The TE9983L + TE9983R pair includes both, or add the right Basco TE9983R on its own.
When to replace
Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.
Signs it's worn
- Play or a clunk in the steering, especially over bumps or when turning
- Wandering on the highway or the vehicle pulling to one side
- Uneven wear on the inside or outside edge of the front tyres
- A split tie rod end boot, or play in the joint when it's checked by hand
Fitting tips
- Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
- Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
- Get a wheel alignment after replacing a tie rod end.
Do the full job
Also in stock for these models:
- Basco TE9983R Right Outer Tie Rod End
- Basco TE9983L + TE9983R Outer Tie Rod End Pair
- Basco RE10019 Inner Steering Rack End (Hyundai Elantra MD, i30 GD, Veloster FS)
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is this the left or the right?
Left. The L / R suffix on Basco's part number marks the side: TE9983L is the left, TE9983R is the right.
Is this the inner or the outer tie rod?
Outer. TE9983L is the outer tie rod end that bolts to the steering knuckle.
Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.