Basco TE9983L & TE9983R Outer Tie Rod End Pair (Left & Right) - to suit Hyundai Elantra MD, i30 GD, Veloster FS & Kia Soul PS (2011 - 2020)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE9983L + TE9983R Outer Tie Rod End Pair (Left & Right): Hyundai Elantra MD, i30 GD, Veloster FS & Kia Soul PS
Both outer tie rod ends for the Hyundai Elantra MD, i30 GD (incl. Tourer diesel), Veloster FS and Kia Soul Si PS, in one order. You get the Basco TE9983L left outer and TE9983R right outer, so both sides are renewed together.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Hyundai Elantra MD (2011 – 2016), i30 GD / GDe incl. Tourer diesel (2012 – 2017), Veloster FS (2012 – 2019) and Kia Soul Si PS (2014 – 2020), see fitment
- Position: left and right outer tie rod ends
- Includes: 1 × Basco TE9983L (left, passenger side) and 1 × Basco TE9983R (right, driver side), each with castle nut
- Change them: when they have play or knock, or a boot is split (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Castle nuts supplied: each comes with its castle nut, as pictured
- Better value: saves $9.95 compared with buying both sides separately
Specifications
| Part numbers | Basco TE9983L (left outer), Basco TE9983R (right outer) |
| Quantity | 2 tie rod ends (1 left, 1 right), each with castle nut |
Basco's catalogue shows the same fitment for TE9983L and TE9983R. Basco's part number suffix and its reseller list TE9983L as the left outer and TE9983R as the right outer.
Vehicle fitment
Basco lists this part for the models below. Years are model build years as Basco lists them.
| Model | Body / series | Engine | Built |
|---|---|---|---|
| Hyundai Elantra MD (incl. Active) | 4 Door Sedan | 1.8L G4NB petrol | 2011 – 2016 |
| Hyundai i30 GD (Active, Elite, Premium, Trophy, SE, Active X) | 4 Door Hatch | 1.8L G4NB petrol | 2012 – 2017 |
| Hyundai i30 GD (Active, Elite, Premium) | 4 Door Hatch | 1.6L D4FB diesel | 2012 – 2017 |
| Hyundai i30 Tourer 1.6 CRDi GD / GDe (Active, Elite) | 4 Door Wagon | 1.6L D4FB diesel | 2012 – 2016 |
| Hyundai Veloster FS | 3 Door Coupe | 1.6L G4FD petrol | 2012 – 2019 |
| Hyundai Veloster SR Turbo FS | 3 Door Coupe | 1.6L G4FJ turbo petrol | 2012 – 2019 |
| Kia Soul Si PS | 4 Door Hatch | 2.0L G4NA petrol | 2014 – 2020 |
Doesn't suit the i30 SR (2.0L G4NC), the 1.6L petrol i30 and i30 Tourer, the i30 FD or PD, the Elantra HD / AD, or other Kia Soul models. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco TE9983L: left outer tie rod end (also sold on its own)
- Basco TE9983R: right outer tie rod end (also sold on its own)
What's in the box
- 1 × Basco TE9983L left outer tie rod end, with castle nut
- 1 × Basco TE9983R right outer tie rod end, with castle nut
When to replace
Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.
Signs they're worn
- Play or a clunk in the steering, especially over bumps or when turning
- Wandering on the highway or the vehicle pulling to one side
- Uneven wear on the inside or outside edge of the front tyres
- A split tie rod end boot, or play in the joint when it's checked by hand
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
- Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
- Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
- Get a wheel alignment after replacing a tie rod end.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two outer tie rod ends: Basco TE9983L (left) and TE9983R (right).
Can I buy just one side?
Yes. TE9983L (left) and TE9983R (right) are also sold separately.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.