Basco WBH1875 rear wheel bearing hub assembly pair x2, both hubs side by side, left and right - Tesla Model 3 & Model Y

Basco WBH1875 Rear Wheel Bearing Hub Assembly Pair (Left & Right, x2) - to suit Tesla Model 3 & Model Y (2019 - On)

Sale price  $283.95 AUD Regular price  $443.72 AUD
Skip to product information
Basco WBH1875 rear wheel bearing hub assembly pair x2, both hubs side by side, left and right - Tesla Model 3 & Model Y

Basco WBH1875 Rear Wheel Bearing Hub Assembly Pair (Left & Right, x2) - to suit Tesla Model 3 & Model Y (2019 - On)

Sale price  $283.95 AUD Regular price  $443.72 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco WBH1875 Rear Wheel Bearing Hub Assembly Pair (x2): Tesla Model 3 & Model Y

Both rear wheel bearing and hub assemblies for the Tesla Model 3 and Model Y, including Rear-Wheel Drive, Long Range and Performance versions, in one order. You get 2 × Basco WBH1875, one for the rear left and one for the rear right, so both sides are renewed together. Each is a complete bolt-in unit with the bearing, splined hub and wheel studs all in one. Only need one side? The single WBH1875 is also available.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Tesla Model 3 Standard Range, Rear-Wheel Drive, Long Range & Performance (2019 – on) and Model Y Rear-Wheel Drive, Long Range & Performance (2022 – on), see fitment
  • Position: rear left and rear right wheel hubs
  • Includes: 2 × Basco WBH1875 (the same part fits either side)
  • Change them: when a bearing hums, growls or has play (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Both sides in one order: 2 hubs, so the rear end is renewed evenly
  • Made for the Model 3 and Model Y: Basco lists WBH1875 as the rear wheel bearing hub for the Tesla Model 3 and Model Y
  • Complete hub assemblies: bearing, splined hub and 5 wheel studs in one unit, ready to bolt in
  • Splined for the rear drive shaft: suits the driven rear axle on every listed Model 3 and Model Y
  • Built to OE specifications: Basco says its parts are made to OE specifications as direct replacements, so no modification is needed
  • Better value: $19.95 cheaper than buying two singles

Specifications

Part number Basco WBH1875 (× 2)
Position Rear, left or right
Type Bolt-on hub and bearing assembly
Drive Splined hub, for the driven rear axle
Wheel studs 5, fitted
Quantity 2 hub assemblies (1 pair)

As shown in the product photos. The flange is stamped BASCO WBH1875.

Vehicle fitment

Model Body Engine Built
Tesla Model 3 Long Range 4 Door Sedan Electric (E0) 2019 – 2025
Tesla Model 3 Performance 4 Door Sedan Electric (E0) 2019 – on
Tesla Model 3 Rear-Wheel Drive 4 Door Sedan Electric (E0) 2022 – on
Tesla Model 3 Standard Range 4 Door Sedan Electric (E0) 2019 – 2022
Tesla Model Y Long Range 4 Door SUV Compact Electric (E0) 2023 – on
Tesla Model Y Performance 4 Door SUV Compact Electric (E0) 2022 – on
Tesla Model Y Rear-Wheel Drive 4 Door SUV Compact Electric (E0) 2022 – on

Suits the Tesla Model 3 sedan (Standard Range, Rear-Wheel Drive, Long Range and Performance) and the Model Y SUV (Rear-Wheel Drive, Long Range and Performance) for the years listed, as listed by Basco. Doesn't suit the front hubs, the Model S or Model X, or Tesla models and years not listed above.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

Part numbers

  • Basco WBH1875: rear wheel bearing hub assembly, left or right (also sold on its own)

What's in the box

  • 2 × Basco WBH1875 rear wheel bearing hub assembly, each with wheel studs

When to replace

Wheel bearings don't have a fixed replacement interval. Have them checked at every service and replace the hub when the bearing is noisy or has play. The hub is a sealed unit, so the bearing can't be repacked or adjusted. EVs are quiet, so bearing noise is often easier to hear, and their extra weight and instant torque work the rear bearings hard. When one side has gone, the other side has done the same kilometres and is often close behind.

Signs they're worn

  • A humming, growling or droning noise from the rear that gets louder with speed, and often changes as the car leans through a corner
  • Free play or a clunk when the rear wheel is rocked top to bottom with the weight off it
  • A grinding or rough feel when the wheel is spun by hand
  • An ABS, traction or stability control warning
  • Vibration through the seat or floor that wasn't there before

Fitting tips

  • Do one side at a time.
  • Turn on Jack Mode and lift only at Tesla's specified jack points, using lift pads. Support the car on stands. Never work under a car on a jack alone.
  • The hub is splined for the rear drive shaft. Undo the drive shaft (axle) nut before you lift the car, and use a new nut on reassembly if your workshop manual calls for one.
  • Remove the rear wheel speed (ABS) sensor before you unbolt the hub, and refit it with a clean tip.
  • Clean any rust and scale off the knuckle face so the new hub sits flat. A hub that isn't seated square can be noisy and wear out early.
  • Torque the hub bolts and the drive shaft nut to the figures in your workshop manual. Don't use a rattle gun to final-torque them.
  • Check the brake rotor, pads and drive shaft CV joint while it's apart.
  • Clear any warnings and test drive the car to confirm the noise has gone.

Do the full job

Also for the Tesla Model 3 and Model Y:

Need brake pads, rotors or suspension parts for your Model 3 or Model Y? Send us your rego or VIN and we'll source them for you.

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

What's included?
Two Basco WBH1875 rear wheel bearing hub assemblies, one for each rear wheel.

Can I buy just one side?
Yes. The single WBH1875 is also sold separately.

Is it the left or the right hub?
Either. Basco WBH1875 fits the rear left and the rear right.

Does it suit my Model 3 or Model Y?
It's listed for the Model 3 Standard Range, Rear-Wheel Drive, Long Range and Performance (2019 – on) and the Model Y Rear-Wheel Drive, Long Range and Performance (2022 – on). Check the fitment table, or send us your VIN.

Does it come with an ABS sensor?
No. There's no sensor or lead on the hub, as pictured. Reuse your existing rear wheel speed sensor.

Is this the front or the rear hub?
Rear. For the front of a single-motor, rear-wheel drive Model 3 or Model Y, see the WBH1876 front hub or the WBH1876 front pair. For dual-motor Long Range or Performance fronts, send us your VIN and we'll source them.

Do I need a wheel alignment?
Not normally for a hub swap, but have it checked if any suspension parts were disturbed.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like