Basco WBH1875 Rear Wheel Bearing Hub Assembly (Left or Right) - to suit Tesla Model 3 & Model Y (2019 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco WBH1875 Rear Wheel Bearing Hub Assembly: Tesla Model 3 & Model Y
The rear wheel bearing and hub assembly for the Tesla Model 3 and Model Y, including Rear-Wheel Drive, Long Range and Performance versions. It's a complete bolt-in unit with the bearing, splined hub and wheel studs all in one, so there's no pressing bearings in or out. The same hub fits the left or right side and it's sold individually. Doing both sides? The WBH1875 pair saves you $19.95.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Tesla Model 3 Standard Range, Rear-Wheel Drive, Long Range & Performance (2019 – on) and Model Y Rear-Wheel Drive, Long Range & Performance (2022 – on), see fitment
- Position: rear wheel hub, fits left or right
- Sold: individually (1 hub). Order 2, or the pair, for both rear sides
- Change it: when the bearing hums, growls or has play (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Made for the Model 3 and Model Y: Basco lists WBH1875 as the rear wheel bearing hub for the Tesla Model 3 and Model Y
- Complete hub assembly: bearing, splined hub and 5 wheel studs in one unit, ready to bolt in
- Splined for the rear drive shaft: suits the driven rear axle on every listed Model 3 and Model Y
- Fits either side: one part number for rear left and rear right
- Built to OE specifications: Basco says its parts are made to OE specifications as direct replacements, so no modification is needed
Specifications
| Part number | Basco WBH1875 |
| Position | Rear, left or right |
| Type | Bolt-on hub and bearing assembly |
| Drive | Splined hub, for the driven rear axle |
| Wheel studs | 5, fitted |
| Quantity | 1 hub assembly (sold individually) |
As shown in the product photos. The flange is stamped BASCO WBH1875.
Vehicle fitment
| Model | Body | Engine | Built |
|---|---|---|---|
| Tesla Model 3 Long Range | 4 Door Sedan | Electric (E0) | 2019 – 2025 |
| Tesla Model 3 Performance | 4 Door Sedan | Electric (E0) | 2019 – on |
| Tesla Model 3 Rear-Wheel Drive | 4 Door Sedan | Electric (E0) | 2022 – on |
| Tesla Model 3 Standard Range | 4 Door Sedan | Electric (E0) | 2019 – 2022 |
| Tesla Model Y Long Range | 4 Door SUV Compact | Electric (E0) | 2023 – on |
| Tesla Model Y Performance | 4 Door SUV Compact | Electric (E0) | 2022 – on |
| Tesla Model Y Rear-Wheel Drive | 4 Door SUV Compact | Electric (E0) | 2022 – on |
Suits the Tesla Model 3 sedan (Standard Range, Rear-Wheel Drive, Long Range and Performance) and the Model Y SUV (Rear-Wheel Drive, Long Range and Performance) for the years listed, as listed by Basco. Doesn't suit the front hubs, the Model S or Model X, or Tesla models and years not listed above.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × Basco WBH1875 rear wheel bearing hub assembly, with wheel studs
Sold individually. Replacing both rear hubs? Grab the WBH1875 pair.
When to replace
Wheel bearings don't have a fixed replacement interval. Have them checked at every service and replace the hub when the bearing is noisy or has play. The hub is a sealed unit, so the bearing can't be repacked or adjusted. EVs are quiet, so bearing noise is often easier to hear, and their extra weight and instant torque work the rear bearings hard. When one side has gone, the other side has done the same kilometres and is often close behind.
Signs it's worn
- A humming, growling or droning noise from the rear that gets louder with speed, and often changes as the car leans through a corner
- Free play or a clunk when the rear wheel is rocked top to bottom with the weight off it
- A grinding or rough feel when the wheel is spun by hand
- An ABS, traction or stability control warning
- Vibration through the seat or floor that wasn't there before
Fitting tips
- Turn on Jack Mode and lift only at Tesla's specified jack points, using lift pads. Support the car on stands. Never work under a car on a jack alone.
- The hub is splined for the rear drive shaft. Undo the drive shaft (axle) nut before you lift the car, and use a new nut on reassembly if your workshop manual calls for one.
- Remove the rear wheel speed (ABS) sensor before you unbolt the hub, and refit it with a clean tip.
- Clean any rust and scale off the knuckle face so the new hub sits flat. A hub that isn't seated square can be noisy and wear out early.
- Torque the hub bolts and the drive shaft nut to the figures in your workshop manual. Don't use a rattle gun to final-torque them.
- Check the brake rotor, pads and drive shaft CV joint while it's apart.
- Clear any warnings and test drive the car to confirm the noise has gone.
Do the full job
Also for the Tesla Model 3 and Model Y:
- Basco WBH1875 Rear Wheel Bearing Hub Assembly Pair (x2)
- Basco WBH1876 Front Wheel Bearing Hub Assembly (single-motor RWD Model 3 & Model Y only)
- Basco WBH1876 Front Wheel Bearing Hub Assembly Pair (x2) (single-motor RWD Model 3 & Model Y only)
Need brake pads, rotors or suspension parts for your Model 3 or Model Y? Send us your rego or VIN and we'll source them for you.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
Is it the left or the right hub?
Either. Basco WBH1875 fits the rear left and the rear right.
Does it suit my Model 3 or Model Y?
It's listed for the Model 3 Standard Range, Rear-Wheel Drive, Long Range and Performance (2019 – on) and the Model Y Rear-Wheel Drive, Long Range and Performance (2022 – on). Check the fitment table, or send us your VIN.
Does it come with an ABS sensor?
No. There's no sensor or lead on the hub, as pictured. Reuse your existing rear wheel speed sensor.
Is this the front or the rear hub?
Rear. For the front of a single-motor, rear-wheel drive Model 3 or Model Y, see the WBH1876 front hub or the WBH1876 front pair. For dual-motor Long Range or Performance fronts, send us your VIN and we'll source them.
Do I need a wheel alignment?
Not normally for a hub swap, but have it checked if any suspension parts were disturbed.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
How many do I need?
It's sold individually. Order 2, or the WBH1875 pair, to replace both rear hubs.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.