NPW T-68 Water Pump with Pulley Hub - to suit Toyota Starlet EP82, EP85, EP91, EP95, GT & Glanza V 1.3L 4E-FE / 4E-FTE (1989 - 1999)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
NPW T-68 Water Pump with Pulley Hub: Toyota Starlet EP82, EP85, EP91 & EP95 1.3L (1989 – 1999)
A new Japanese-made NPW engine water pump, with its pulley hub fitted, for the 1.3-litre Toyota Starlet from 1989 to 1999, including the Starlet GT and Glanza V turbo. The water pump circulates coolant through the engine and radiator to keep it at the right temperature. When it starts to leak or the bearing wears, the engine can overheat quickly, so it's worth replacing at the first sign of trouble.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Toyota Starlet EP82 (1989 – 1995), EP85 (1990 – 1995), EP91 (1995 – 1999) and EP95 (1996 – 1999), plus the Starlet GT and Glanza V turbo. 1.3L 4E-F, 4E-FE and 4E-FTE engines. See fitment.
- Type: engine coolant water pump with 4-bolt pulley hub fitted
- Part number: NPW T-68
- Change it: when it leaks, gets noisy or the engine runs hot, or whenever the drive belt is replaced
- Brand: NPW, a Japanese water pump specialist. Made in Japan (cast into the housing).
Key features
- Made for the 1.3L Starlet: our supplier lists NPW T-68 for the EP82, EP85, EP91 and EP95 Starlet, including the GT and Glanza V turbo
- Pulley hub fitted: the pump comes with its 4-bolt pulley hub (flange) already pressed on, so your belt pulley bolts straight on
- Made in Japan: "Made in Japan" is cast into the aluminium housing, and NPW says on the box that its pumps meet or exceed original equipment manufacturers' specifications
- Cast aluminium housing: a lightweight, corrosion-resistant housing with a sealed bearing
- Water pump specialist: NPW makes water pumps for Japanese vehicles and is one of the best-known names in Japanese aftermarket pumps
- Direct replacement: designed as an OE-style bolt-on replacement for the original pump
Specifications
| Part number | NPW T-68 |
| Type | Engine coolant water pump |
| Pulley hub | 4-bolt pulley hub (flange) fitted |
| Housing | Cast aluminium |
| Country of manufacture | Japan |
| Engine | Toyota 1.3L 4-cylinder 16-valve DOHC (4E-F, 4E-FE, 4E-FTE turbo) |
| Quantity | 1 water pump |
Part number and fitment are as published by our supplier for NPW T-68. Pulley hub, housing and country of manufacture are from the pump in our photo.
Check your old pump
Toyota's E-series engines have used more than one water pump design over the years, and some look alike. Before you order, compare your old pump with our photos, or send us a photo of it along with your rego or VIN. We'll confirm it's the right one before you buy.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Toyota Starlet EP82R 2D & 4D Hatch | 1.3L 4E-F | 1989 – 1991 |
| Toyota Starlet EP82R 2D & 4D Hatch | 1.3L 4E-FE | 1989 – 1995 |
| Toyota Starlet GT EP82R 2D Hatch | 1.3L 4E-FTE turbo | 1989 – 1995 |
| Toyota Starlet EP85R 2D & 4D Hatch | 1.3L 4E-F | 1990 – 1991 |
| Toyota Starlet EP85R 2D & 4D Hatch | 1.3L 4E-FE | 1992 – 1995 |
| Toyota Starlet EP91R 2D & 4D Hatch | 1.3L 4E-FE | 1995 – 1999 |
| Toyota Starlet Glanza V EP91R 2D Hatch | 1.3L 4E-FTE turbo | 1995 – 1999 |
| Toyota Starlet EP95R 2D Hatch | 1.3L 4E-FE | 1996 – 1999 |
All are 1.3L 4-cylinder 16-valve DOHC engines. Doesn't suit other Toyota models, such as the Corolla, Paseo or Tercel, unless we've confirmed it for your car. Some of them share the same E-series engine family, but we only list the fitment our supplier publishes for this pump.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 1 × NPW T-68 engine water pump with pulley hub fitted
A gasket isn't shown in our photo. The belt pulley, drive belt, coolant and bolts aren't included, so reuse your existing belt pulley.
When to replace
A water pump is a wear item. Replace it when it leaks, gets noisy or lets the engine run hot. On a Starlet that's 25 to 35 years old, the original pump has usually done its time, so if you're replacing the drive belt or doing a cooling system overhaul, it's worth fitting a new pump at the same time.
Signs it's failing
- Coolant weeping from the pump's weep hole, or crusty coolant residue around the pump
- The coolant level dropping with no other obvious leak
- The temperature gauge climbing, or the engine overheating
- A growl, whine or grinding from the front of the engine that changes with engine speed
- Play or wobble in the pulley when the belt is off
Fitting tips
- Never run it dry. Running a pump without coolant overheats the seal faces and damages the mechanical seal straight away.
- Handle it gently. Even a small drop can damage the bearing or the housing.
- Clean the mating face. Scrape off all the old gasket material and make sure the block face is clean and flat before fitting.
- Torque it properly. Tighten the pump bolts to the figures in your workshop manual.
- Use fresh coolant. Flush the system and refill with fresh coolant that meets Toyota's specification, then bleed out any air.
- Set the belt tension. Adjust the drive belt to the correct tension. Too tight wears out the new pump bearing early.
Do the full job
While you're there, it's worth renewing:
- The water pump drive belt, if it's worn, cracked or coolant-soaked. Ask us for a price.
- The thermostat and its gasket
- The engine coolant (flush and refill)
- Any perished radiator or heater hoses and clamps
Need something else for your Starlet? Send us your rego or VIN and we'll track it down.
Why NPW?
NPW (Nissan Pump) is a Japanese water pump specialist based in Kobe, Japan, and this pump is made in Japan. It's one of the best-known water pump brands for Japanese vehicles, so it's a trusted choice for keeping an older Toyota running cool.
FAQs
Does it come with the belt pulley?
No. It comes with the 4-bolt pulley hub (flange) already pressed on, as in our photo. Move your existing belt pulley across and bolt it to the hub.
Does it fit the Starlet GT or Glanza V turbo?
Yes. Our supplier lists it for the Starlet GT EP82R (1989 – 1995) and the Glanza V EP91R (1995 – 1999) with the 1.3L 4E-FTE turbo engine.
Does it fit the Paseo, Corolla or Tercel?
We only list it for the Starlet models above. Some of those cars share the E-series engine family, so send us your rego or VIN and we'll check before you buy.
Is a gasket included?
A gasket isn't shown in our photo, so plan on a new water pump gasket or the sealant your workshop manual specifies. Ask us and we'll confirm what to use.
Will a non-genuine pump void my warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the NPW manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.