Basco BCA1231 & BCA1299 Front Upper Control Arm Pair (Left & Right) - to suit Nissan Navara D23 / NP300 2.3L Twin Turbo Diesel (2020 - On)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco BCA1231 + BCA1299 Front Upper Control Arm Pair (Left & Right): Nissan Navara D23 / NP300
Both front upper control arms for the Nissan Navara D23 / NP300 with the 2.3L YS23DDTT twin-turbo diesel, in one order, each supplied with its ball joint fitted. You get the Basco BCA1231 front left and BCA1299 front right, so both sides are renewed together and the front end stays balanced.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Nissan Navara D23 / NP300 2.3L twin-turbo diesel (2020 – on), SL, ST and ST-X incl. King Cab, see fitment
- Position: front left and front right upper control arms
- Includes: 1 × Basco BCA1231 (left, passenger side) and 1 × Basco BCA1299 (right, driver side)
- Change them: when a ball joint has play, its boot is split, or the bushes are cracked or perished (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: a matched left and right, so you don't have to order two part numbers
- Ball joints fitted: each arm comes with its ball joint and bushes already in place
- Built to OE specifications: Basco says its control arms are made to OE specifications as direct replacements, so no modification is needed
- Better value: saves $9.95 compared with buying both sides separately
Specifications
| Spec | BCA1231 (left) | BCA1299 (right) |
|---|---|---|
| Position | Front left upper (passenger side) | Front right upper (driver side) |
| Ball joint | Fitted | Fitted |
| Ball joint cone diameter | 15mm | 15mm |
| Ball joint thread | M14 x 1.5 | M14 x 1.5 |
| Length | 334mm | 334mm |
| Ball joint offset | 171.5mm from the outside of the front bush | 171.5mm from the outside of the front bush |
Specifications as published for Basco BCA1231 and BCA1299.
Check your old arm: Basco specifies this arm with the ball joint 171.5mm from the outside of the front bush. Measure your old arm before ordering. If yours is different, send us your VIN or rego and we'll find the right arm.
Vehicle fitment
Basco lists this arm for the models below. Years are model build years as Basco lists them.
| Model | Body | Engine | Built |
|---|---|---|---|
| Nissan Navara D23 / NP300 | 4 Door Ute, Dual Cab, Wellside | 2.3L YS23DDTT (M9T) twin-turbo diesel | 2020 – on |
| Nissan Navara SL D23 / NP300 | 2 Door Ute, Single Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL King Cab D23 / NP300 | 4 Door Ute, King Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL King Cab D23 / NP300 | 4 Door Ute, King Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST D23 / NP300 | 4 Door Ute, Dual Cab, Cab Chassis | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST, ST-X D23 / NP300 | 4 Door Ute, Dual Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
| Nissan Navara SL, ST, ST-X King Cab D23 / NP300 | 4 Door Ute, King Cab, Wellside | 2.3L YS23DDTT twin-turbo diesel | 2020 – on |
Doesn't suit the Navara D40, D23 models built before 2020, D23 models with the single-turbo 2.3L YS23DDT, 2.5L YD25 diesel or 2.5L QR25DE petrol engines, or the lower or rear arms. Basco doesn't list it for those.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco BCA1231: front left upper control arm (also sold on its own)
- Basco BCA1299: front right upper control arm (also sold on its own)
What's in the box
- 1 × Basco BCA1231 front left upper control arm, with ball joint fitted
- 1 × Basco BCA1299 front right upper control arm, with ball joint fitted
Basco doesn't list any mounting bolts or nuts with these arms.
When to replace
Control arms don't have a fixed replacement interval. Have the ball joints and bushes checked at every service, and replace the arms when a ball joint has play or a split boot, or the bushes are cracked or perished. Both sides do the same work, so replacing them as a pair keeps the handling even and means you only pay for one wheel alignment.
Signs they're worn
- Knocking or clunking from the front over bumps, speed humps or rough roads
- Vague or wandering steering, or the car pulling to one side
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split ball joint boot, or cracked and perished bushes
Fitting tips
- Do one side at a time so you don't mix up left and right.
- Tighten the bush bolts with the suspension at ride height, so the bushes aren't pre-loaded and don't tear.
- The upper arm sets caster and camber, so get a wheel alignment after fitting.
- Use new nuts and bolts where the workshop manual calls for them, and torque everything to the figures in your workshop manual.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two front upper control arms, each with its ball joint fitted: Basco BCA1231 (front left) and BCA1299 (front right).
Can I buy just one side?
Yes. BCA1231 (left) and BCA1299 (right) are also sold separately.
Does it fit the single-turbo Navara?
Basco lists this arm only for the D23 / NP300 with the 2.3L YS23DDTT twin-turbo diesel, built 2020 – on. Send us your VIN if you're not sure which engine you have.
Do I need a wheel alignment?
Yes, get one after fitting new control arms. Doing both sides at once means you only need one alignment.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.