Basco CVB1000EO outer CV joint boot kit with clamps and grease, to suit Toyota Hilux KUN26 and GGN25

Basco CVB1000EO Outer CV Joint Boot Kit (Wheel Side) - to suit Toyota Hilux KUN26 & GGN25 4WD (2005 - 2015) - Suits CVA1000EXTD Only

$32.95 AUD
Skip to product information
Basco CVB1000EO outer CV joint boot kit with clamps and grease, to suit Toyota Hilux KUN26 and GGN25

Basco CVB1000EO Outer CV Joint Boot Kit (Wheel Side) - to suit Toyota Hilux KUN26 & GGN25 4WD (2005 - 2015) - Suits CVA1000EXTD Only

$32.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco CVB1000EO Outer CV Joint Boot Kit (Wheel Side): Toyota Hilux KUN26 & GGN25

A wheel side (outer) CV joint boot kit for the 4WD Toyota Hilux KUN26 3.0L diesel and GGN25 4.0L V6, 2005 – 2015. The boot seals the CV joint at the wheel end of the front drive shaft, keeping the grease in and the dirt and water out. It suits the Basco CVA1000EXTD drive shaft's wheel side joint only. If your Hilux has a different drive shaft fitted, check with us before ordering.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Toyota Hilux 4WD KUN26 3.0L diesel and GGN25 4.0L V6 (2005 – 2015), see fitment
  • Position: front drive shaft, wheel side (outer) CV joint, left or right
  • Important: suits the CVA1000EXTD wheel side joint only
  • Includes: CV boot, 2 clamps and a sachet of CV grease, as pictured
  • Sold: as 1 kit for 1 joint
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Complete boot kit: boot, clamps and grease, so you can reseal the joint in one go
  • Fits either side: one kit does the wheel side joint on one front drive shaft
  • Matched to CVA1000EXTD: made for the wheel side joint of the Basco CVA1000EXTD drive shaft

Specifications

Part number Basco CVB1000EO
Position Front drive shaft, wheel side (outer) joint
Suits joint Basco CVA1000EXTD wheel side joint only
Quantity 1 boot kit

Fitment and the CVA1000EXTD note as published by Basco. Fitment also as published by Basco's reseller for CVB1000EO.

Vehicle fitment

Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.

Model Body / series Engine Built
Toyota Hilux SR, SR5, SR5 Extra Cab, Workmate KUN26R Single, Extra & Dual Cab 3.0L 1KD-FTV diesel 2005 – 2015
Toyota Hilux SR GGN25R Single & Dual Cab 4.0L 1GR-FE V6 petrol 2005 – 2014
Toyota Hilux SR5, SR5 Extra Cab GGN25R Extra & Dual Cab 4.0L 1GR-FE V6 petrol 2005 – 2015
Toyota Hilux TRD S GGN25R 4 Door Dual Cab 4.0L 1GR-FE V6 petrol (supercharged) 2008 – 2009

Doesn't suit the 2WD Hilux (no front drive shafts), the inner (diff side) CV joint, or the 2015 – on Hilux GUN. The TRD SL isn't confirmed by Basco's second source, so check with us first.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × CV joint boot
  • 2 × boot clamps
  • 1 × sachet of CV joint grease

One kit does one joint. Doing both front shafts? Add 2 to your cart.

When to replace

Replace a CV boot as soon as it's split or torn. Once the grease is flung out and dirt gets in, the joint wears fast and you'll be up for a CV joint or a full drive shaft instead of a boot.

Signs it's worn

  • Grease flung around the inside of the wheel, the brake parts or the chassis rail
  • A split, cracked or torn boot when you look behind the front wheel
  • A clicking noise on full lock, which means the joint itself may already be worn

Fitting tips

  • Confirm your drive shaft is the Basco CVA1000EXTD (or matches it) before you pull it apart. This boot kit suits its wheel side joint only.
  • Clean all the old grease and grit out of the joint, check it for wear, then pack it with the new grease.
  • Seat the boot in its grooves, burp out any trapped air, and crimp the clamps firmly.
  • If the joint clicks or has play, replace the joint or drive shaft rather than just the boot.

Do the full job

Also in stock for the Hilux KUN26 / GGN25:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the inner or the outer boot?
The outer, wheel side boot.

Does it fit any drive shaft?
No. Basco lists CVB1000EO as suiting the CVA1000EXTD wheel side joint only. If you're unsure what shaft is fitted, send us a photo and we'll check.

Does it fit the 2WD Hilux?
No. The 2WD Hilux has no front drive shafts.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like