Basco RE10001 inner steering rack end with lock nut and washer, to suit Toyota C-HR

Basco RE10001 Inner Steering Rack End - to suit Toyota C-HR NGX10, NGX50 & ZYX10 Hybrid (2016 - 2023)

$24.95 AUD
Skip to product information
Basco RE10001 inner steering rack end with lock nut and washer, to suit Toyota C-HR

Basco RE10001 Inner Steering Rack End - to suit Toyota C-HR NGX10, NGX50 & ZYX10 Hybrid (2016 - 2023)

$24.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco RE10001 Inner Steering Rack End: Toyota C-HR

The inner steering rack end (inner tie rod) for the Toyota C-HR NGX10R / NGX50R 1.2L turbo (2017 – 2023) and C-HR Hybrid ZYX10R (2016 – 2023). It screws onto the end of the steering rack and connects to the outer tie rod end, so it carries every steering input to the front wheels. Basco lists one part number for the inner rack end position, so order 2 to do both sides.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Toyota C-HR NGX10R / NGX50R 1.2L turbo (2017 – 2023) and C-HR Hybrid ZYX10R (2016 – 2023), see fitment
  • Position: inner steering rack end
  • Length: 280mm
  • Sold: individually. Order 2 for both sides
  • Change it: when it has play or knocks, or the rack boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • One part number for the inner position: Basco lists RE10001 for the inner rack end
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco RE10001
Position Inner steering rack end
Length 280mm
Outer thread M16 x 1.5
Inner thread M14 x 1.5
Quantity 1 rack end

Fitment and specifications as published by Basco.

Vehicle fitment

Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.

Model Body / series Engine Built
Toyota C-HR NGX10R / NGX50R 4 Door SUV 1.2L 8NR-FTS turbo petrol 2017 – 2023
Toyota C-HR Hybrid ZYX10R 4 Door SUV 1.8L 2ZR-FXE hybrid 2016 – 2023

Not listed for the C-HR ZYX11R, the Corolla, Corolla Cross or Prius. Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco RE10001 inner steering rack end, as pictured

Sold individually. Replacing both sides? Add 2 to your cart.

When to replace

Rack ends don't have a fixed replacement interval. Have them checked at every service and replace a rack end when it has play or knocks, or when the rack boot is split and dirt has got in.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split or leaking steering rack boot

Fitting tips

  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Fit a new lock washer or staked tab if your rack uses one, and torque the rack end to the figure in your workshop manual.
  • Replace the rack boot and clamps if they're split or perished.
  • Get a wheel alignment after replacing a rack end.

Do the full job

Also in stock for the C-HR:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Do I need one or two?
Basco lists one part number for the inner rack end position. Order 2 to replace both sides.

Is this the inner or the outer tie rod?
Inner. RE10001 is the inner rack end that screws onto the steering rack.

Do I need a wheel alignment?
Yes. Get one after replacing a rack end.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like