Basco RE9321 inner steering rack end with lock washer and nut, to suit Toyota Hilux 2005-2015

Basco RE9321 Inner Steering Rack End - to suit Toyota Hilux KUN16, KUN26, KUN25, GGN15 & GGN25 (2005 - 2015)

$36.95 AUD
Skip to product information
Basco RE9321 inner steering rack end with lock washer and nut, to suit Toyota Hilux 2005-2015

Basco RE9321 Inner Steering Rack End - to suit Toyota Hilux KUN16, KUN26, KUN25, GGN15 & GGN25 (2005 - 2015)

$36.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco RE9321 Inner Steering Rack End: Toyota Hilux (2005 – 2015)

The inner steering rack end (inner tie rod) for the Toyota Hilux KUN and GGN series built 2005 – 2015. It screws onto the end of the steering rack and connects to the outer tie rod end, so it carries every steering input to the front wheels. A worn rack end shows up as play and wander in the steering.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Toyota Hilux KUN16, KUN26, KUN25, GGN15 and GGN25 (2005 – 2015), see fitment
  • Position: inner steering rack end
  • Length: 310mm
  • Threads: M14 x 1.5 (rack end), M15 x 1.5 (tie rod end)
  • Change it: when it has play or knocks, or the rack boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Made for the 2005 – 2015 Hilux: Basco lists RE9321 as the inner rack end for the KUN and GGN series
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco RE9321
Position Inner steering rack end
Length 310mm
Inner thread (rack end) M14 x 1.5
Outer thread (tie rod end) M15 x 1.5
Quantity 1 rack end

Specifications as published by Basco for RE9321.

Vehicle fitment

Basco lists this part for the models below. Years are model build years as Basco lists them.

Model Body / series Engine Built
Toyota Hilux SR, SR5, Workmate KUN16R (2WD) Single, Extra & Dual Cab 3.0L 1KDFTV turbo diesel 2006 – 2015
Toyota Hilux SR, SR5, Workmate KUN26R (4WD) Single, Extra & Dual Cab 3.0L 1KDFTV turbo diesel 2005 – 2015
Toyota Hilux KUN25R Dual Cab 2.5L 2KDFTV turbo diesel 2005 – 2015
Toyota Hilux SR, SR5 GGN15R (2WD) Single, Extra & Dual Cab 4.0L 1GRFE V6 petrol 2005 – 2015
Toyota Hilux SR, SR5 GGN25R (4WD) Single & Dual Cab 4.0L 1GRFE V6 petrol 2005 – 2015

Basco lists one RE9321 part number for these models and doesn't list a separate left or right version. Doesn't suit the Hilux built before 2005 or the 2015 – on Hilux GUN models. Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco RE9321 inner steering rack end, with lock washer and nut, as pictured

Sold individually. Replacing both sides? Add 2 to your cart.

When to replace

Rack ends don't have a fixed replacement interval. Have them checked at every service and replace a rack end when it has play or knocks, or when the rack boot is split and dirt has got in.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split or leaking steering rack boot

Fitting tips

  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Fit a new lock washer or staked tab if your rack uses one, and torque the rack end to the figure in your workshop manual.
  • Replace the rack boot and clamps if they're split or perished.
  • Get a wheel alignment after replacing a rack end.

Do the full job

Also in stock for the Hilux:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the inner or the outer tie rod?
Inner. RE9321 is the inner rack end that screws onto the steering rack.

Do I need a wheel alignment?
Yes. Get one after replacing a rack end.

Does it fit the 2015 – on Hilux?
No. Basco lists it for the 2005 – 2015 Hilux KUN and GGN series.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like