Basco TE10000 Outer Tie Rod End Pair (Front Left & Right) - to suit Holden Colorado RC (2008 - 2012), Isuzu D-Max TFR/TFS (2008 - On) & MU-X
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco TE10000 Outer Tie Rod End Pair (Left & Right): Holden Colorado RC, Isuzu D-Max & MU-X
Two Basco TE10000 front outer tie rod ends for the Holden Colorado RC, Isuzu D-Max TFR / TFS and Isuzu MU-X, in one order. Basco lists TE10000 for either side, so this pair covers both the front left and front right, ready for a single wheel alignment.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Holden Colorado RC (2008 – 2012), Isuzu D-Max TFR / TFS (2008 – on) and Isuzu MU-X (2016 – on), see fitment
- Position: front left and front right, outer tie rod ends
- Includes: 2 × Basco TE10000 (one for each side)
- Change them: when there's play, a split or leaking boot, or uneven tyre wear (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: two TE10000, so the left and right are renewed together
- Wide D-Max coverage: listed for the 3.0L 4JJ1 and 4JJ3, 1.9L RZ4E and 2.2L RZ4F D-Max, including SX, LS-U, Space Cab and Highride models
- Direct replacement: built as direct replacements, so no modification is needed (Basco)
- Better value: saves $9.95 compared with buying both sides separately
Specifications
| Part number | TE10000 (× 2) |
| Brand | Basco |
| Barcode (EAN, each) | 9356247158167 |
| Position | Front left and front right, outer |
| Vehicles | Holden Colorado RC, Isuzu D-Max & MU-X |
| Quantity | 2 tie rod ends |
Part details as published for Basco TE10000. Compare with your old tie rod ends before fitting.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Holden Colorado RC (DX, LX, LT-R, LX-R), single cab & dual cab ute | 3.0L 4JJ1-TCX turbo diesel | 2008 – 2012 |
| Isuzu D-Max TFR / TFS (incl. SX & Space Cab), single, space & dual cab | 3.0L 4JJ1-TCX turbo diesel | 2008 – 2012 |
| Isuzu D-Max TFR / TFS (incl. SX & Space Cab), single, space & dual cab | 3.0L 4JJ1-TCX turbo diesel | 2012 – 2020 |
| Isuzu D-Max TFR / TFS (incl. SX, LS-U & Space Cab), single, space & dual cab | 3.0L 4JJ3-TCX turbo diesel | 2020 – On |
| Isuzu D-Max TFS dual cab & SX Highride TFR cab chassis | 1.9L RZ4E-TC turbo diesel | 2021 – 2025 |
| Isuzu D-Max TFS dual cab & SX Highride TFR single & dual cab | 2.2L RZ4F-TC turbo diesel | 2025 – On |
| Isuzu MU-X LS-M (UCR) 4-door SUV | 1.9L RZ4E-TC turbo diesel | 2016 – 2025 |
| Isuzu MU-X (RJ) 4-door SUV | 3.0L 4JJ3-TCX turbo diesel | 2021 – On |
Basco lists this part for 29 Holden Colorado RC, Isuzu D-Max and MU-X variants. Doesn't suit the Holden Colorado RG or Colorado 7 (2012 – 2020), the 2.5L 4JK1 D-Max, or the Mazda BT-50. Basco doesn't list it for the 3.0L MU-X built 2013 – 2021 either, so check with us before ordering for that model.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco TE10000: front outer tie rod end, left or right (also sold on its own)
What's in the box
- 2 × Basco TE10000 outer tie rod end
When to replace
Tie rod ends don't have a fixed replacement interval. Have the steering joints checked at every service and replace a tie rod end if there's free play in the ball joint, the rubber boot is split or leaking grease, or the vehicle fails a roadworthy inspection on steering play.
Both sides do the same work, so when one is worn the other is often close behind. Replacing them as a pair means one job and one alignment.
Signs they're worn
- Knocking or clunking from the front when steering or driving over bumps
- Loose or vague steering, or the vehicle wandering on the road
- Uneven or rapid wear on the inside or outside edge of the front tyres
- A split, torn or greasy rubber boot on a tie rod end
- Play you can feel when a front wheel is rocked side to side (at 9 and 3 o'clock) with the vehicle raised
Fitting tips
- Do one side at a time.
- Before removing each old end, count the turns or measure its position on the tie rod so the new one goes back close to the same toe setting.
- Use a proper ball joint separator. Don't hammer on the threads or the boot.
- Torque the lock nuts and ball stud nuts to the figures in your workshop manual, and fit new split pins if your vehicle uses them.
- Get a professional wheel alignment straight after fitting, because replacing tie rod ends always changes the toe.
Do the full job
Also in stock for the Holden Colorado and Isuzu D-Max (check the fitment on each, as years and models vary):
- Basco BCA1102 + BCA1114 Front Upper Control Arm Pair
- Basco BCA1102 Front Left Upper Control Arm and BCA1114 Front Right Upper Control Arm
- Bendix DB1841-UP4WD Ultra Premium 4WD Front Brake Pads
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two Basco TE10000 outer tie rod ends. Basco lists TE10000 for either side, so one goes on the front left and one on the front right.
Can I buy just one?
Yes. Basco TE10000 is also sold individually.
Do I need a wheel alignment after fitting?
Yes. Replacing tie rod ends changes the toe setting, so book an alignment straight after to protect your tyres.
Does it fit the Holden Colorado RG?
No. Basco lists TE10000 for the earlier Colorado RC (2008 – 2012) only.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose and the work follows the manufacturer's schedule. Keep your receipts and logbook stamps.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.