Basco TE10028 left outer tie rod end with castle nut and split pin, to suit Suzuki Swift FZ

Basco TE10028 Left Outer Tie Rod End (LHS) - to suit Suzuki Swift FZ 1.4L (2011 - 2017) & Swift Sport FZ (2012 - 2017)

$38.95 AUD
Skip to product information
Basco TE10028 left outer tie rod end with castle nut and split pin, to suit Suzuki Swift FZ

Basco TE10028 Left Outer Tie Rod End (LHS) - to suit Suzuki Swift FZ 1.4L (2011 - 2017) & Swift Sport FZ (2012 - 2017)

$38.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco TE10028 Left Outer Tie Rod End (LHS): Suzuki Swift FZ & Swift Sport FZ

The left outer tie rod end for the Suzuki Swift FZ 1.4L (2011 – 2017) and Swift Sport FZ 1.6L (2012 – 2017). It joins the inner rack end to the steering knuckle, so it carries every steering input to the front wheel. Basco's resellers list TE10028 as the left, with Basco TE10029 as the matching right. In Australia the left is the passenger side. Need both? Get them together in the TE10028 + TE10029 pair.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Suzuki Swift FZ 1.4L (2011 – 2017) and Swift Sport FZ 1.6L (2012 – 2017), see fitment
  • Position: left outer tie rod end (LHS, passenger side)
  • Partner part: Basco TE10029 (right outer)
  • Length: 190mm
  • Includes: tie rod end with castle nut and split pin, as pictured
  • Change it: when it has play or knocks, or its boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Side-specific: left and right are separate part numbers. Order TE10028 for the left
  • Castle nut and split pin supplied: as pictured
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco TE10028
Position Left outer (LHS, passenger side)
Length 190mm
Cone size 13.1mm
Threads M14 x 1.5 and M12 x 1.25
Quantity 1 tie rod end with castle nut and split pin

Fitment and specifications as published by Basco. Side as published by Basco's resellers for TE10028.

Vehicle fitment

Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.

Model Body / series Engine Built
Suzuki Swift FZ (GA, GL, GLX) 4 Door Hatch 1.4L K14B petrol 2011 – 2017
Suzuki Swift Sport FZ 4 Door Hatch 1.6L M16A petrol 2012 – 2017

Not listed for the Swift FZ 1.3L DDiS diesel, the earlier Swift RS / EZ (2005 – 2010) or the later Swift AZ (2017 – on). Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco TE10028 left outer tie rod end
  • 1 × castle nut
  • 1 × split pin

Need both sides? The TE10028 + TE10029 pair includes both, or add the right Basco TE10029 on its own.

When to replace

Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split tie rod end boot, or play in the joint when it's checked by hand

Fitting tips

  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
  • Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
  • Get a wheel alignment after replacing a tie rod end.

Do the full job

Also in stock for the Swift FZ:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right?
Left. Basco's resellers list TE10028 as the left outer tie rod end. In Australia the left is the passenger side. The right is TE10029.

Is this the inner or the outer tie rod?
Outer. TE10028 is the outer tie rod end that bolts to the steering knuckle.

Does it fit the Swift Sport?
Yes, the Swift Sport FZ 1.6L M16A, 2012 – 2017. The newer Swift Sport AZ isn't listed.

Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like