Basco TE10030 left outer tie rod end, part of the TE10030 & TE10031 pair

Basco TE10030 Left Outer Tie Rod End (LHS) - to suit Nissan Navara D23 / NP300 (2014 - On)

$37.95 AUD
Skip to product information
Basco TE10030 left outer tie rod end, part of the TE10030 & TE10031 pair

Basco TE10030 Left Outer Tie Rod End (LHS) - to suit Nissan Navara D23 / NP300 (2014 - On)

$37.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco TE10030 Left Outer Tie Rod End (LHS): Nissan Navara D23 / NP300

The left outer tie rod end for the Nissan Navara D23 / NP300 ute, 2014 – on, with the 2.5L diesel, 2.5L petrol and 2.3L single and twin turbo diesel. It joins the inner rack end to the steering knuckle, so it carries every steering input to the front left wheel. Basco's reseller lists TE10030 as the outer left tie rod end. In Australia the left is the passenger side.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Nissan Navara D23 / NP300 DX, RX, SL, ST and ST-X, incl. King Cab (2014 – on), see fitment
  • Position: left outer tie rod end (LHS, passenger side)
  • Sold: individually. This is the left side only
  • Change it: when it has play or knocks, or its boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Side-specific: made for the left outer position. Order TE10030 for the left
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco TE10030
Position Left outer (LHS, passenger side)
Quantity 1 tie rod end

Fitment as published by Basco. Side as published by Basco's reseller for TE10030.

Vehicle fitment

Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.

Model Body / series Engine Built
Nissan Navara D23 / NP300 4 Door Dual Cab Ute 2.5L YD25DDTi diesel 2014 – 2020
Nissan Navara DX D23 / NP300 2 Door Single Cab & 4 Door Dual Cab 2.5L QR25DE petrol 2015 – on
Nissan Navara DX, RX, RX King Cab D23 / NP300 Single, King & Dual Cab 2.3L YS23DDT diesel 2015 – 2020
Nissan Navara SL, ST, ST-X (incl. King Cab) D23 / NP300 Single, King & Dual Cab 2.3L YS23DDTT twin turbo diesel 2015 – on

Doesn't suit the earlier Navara D40 or D22, the Navara D23 right side, or the Nissan Pathfinder or Terra. Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco TE10030 left outer tie rod end, as pictured

Sold individually. This is the left side only. Need the right? Give the HOOROO Crew a coo-ee and we'll help.

When to replace

Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split tie rod end boot, or play in the joint when it's checked by hand

Fitting tips

  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
  • Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
  • Get a wheel alignment after replacing a tie rod end.

Do the full job

Also in stock for the Navara D23 / NP300 2.3L twin turbo diesel (2020 – on):

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right?
Left. Basco's reseller lists TE10030 as the outer left tie rod end. In Australia that's the passenger side.

Is this the inner or the outer tie rod?
Outer. TE10030 is the outer tie rod end that bolts to the steering knuckle.

Does it fit the 2.5L petrol DX?
Yes. Basco lists it for the Navara DX D23 / NP300 with the 2.5L QR25DE petrol, 2015 – on.

Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like