Basco TE10035 left tie rod end with nut, the tie rod end behind the diff, to suit Suzuki Jimny GJ, Sierra and XL

Basco TE10035 Left Tie Rod End (Behind the Diff) - to suit Suzuki Jimny GJ, Sierra & Jimny XL 1.5L (2018 - On)

$30.95 AUD
Skip to product information
Basco TE10035 left tie rod end with nut, the tie rod end behind the diff, to suit Suzuki Jimny GJ, Sierra and XL

Basco TE10035 Left Tie Rod End (Behind the Diff) - to suit Suzuki Jimny GJ, Sierra & Jimny XL 1.5L (2018 - On)

$30.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco TE10035 Left Tie Rod End (Behind the Diff): Suzuki Jimny GJ, Sierra & XL

The left tie rod end that sits behind the front diff on the current Suzuki Jimny GJ, Sierra and 5-door Jimny XL (2018 – on). Basco's reseller lists TE10035 as the left tie rod end that sits behind the diff. The Jimny uses different tie rod ends in different spots, so check yours: Basco lists the right-hand one behind the diff as TE10034, and the right front one (where the steering damper bolts on) as TE10036.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Suzuki Jimny GJ and Sierra (2018 – on) and Jimny XL (2023 – on), 1.5L K15B, see fitment
  • Position: left tie rod end, behind the front diff
  • Change it: when it has play or knocks, or its boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Made for the current Jimny: Basco lists TE10035 for the GJ, Sierra and XL
  • Nut supplied: comes with its nut, as pictured
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco TE10035
Position Left, behind the diff
Quantity 1 tie rod end with nut

Position as published by Basco's reseller for TE10035.

Vehicle fitment

Basco lists this part for the models below. Years are model build years as Basco lists them.

Model Body / series Engine Built
Suzuki Jimny GJ 2 Door SUV 1.5L K15B petrol 2018 – on
Suzuki Jimny Sierra 2 Door SUV 1.5L K15B petrol 2018 – on
Suzuki Jimny XL 4 Door SUV 1.5L K15B petrol 2023 – on

Doesn't suit the right-hand tie rod ends (Basco TE10034 and TE10036), or the Jimny SN413 (1998 – 2018). Basco doesn't list it for those.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco TE10035 left tie rod end, with nut

Sold individually.

When to replace

Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split tie rod end boot, or play in the joint when it's checked by hand

Fitting tips

  • Check which tie rod end you're replacing. TE10035 is the left one behind the diff.
  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Torque the nut to the figure in your workshop manual, and fit a new split pin if your tie rod uses one.
  • Get a wheel alignment after replacing a tie rod end.

Do the full job

Also in stock for these models:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Which tie rod end is this?
The left one that sits behind the front diff. Basco lists the right one behind the diff as TE10034 and the right front one, where the steering damper bolts on, as TE10036.

Does it fit the 5-door Jimny XL?
Yes. Basco lists it for the Jimny XL (2023 – on) as well as the GJ and Sierra.

Does it fit the older SN413 Jimny?
No. Basco lists it for the 2018 – on Jimny only.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like