Basco TE9881 outer tie rod end with nut and split pin, to suit Toyota Hilux KUN26 and Hilux Surf

Basco TE9881 Outer Tie Rod End (Left or Right) - to suit Toyota Hilux KUN25, KUN26, GGN25 (2005 - 2015) & Hilux Surf 215 (2004 - 2009)

$24.95 AUD
Skip to product information
Basco TE9881 outer tie rod end with nut and split pin, to suit Toyota Hilux KUN26 and Hilux Surf

Basco TE9881 Outer Tie Rod End (Left or Right) - to suit Toyota Hilux KUN25, KUN26, GGN25 (2005 - 2015) & Hilux Surf 215 (2004 - 2009)

$24.95 AUD
Taxes included. Shipping calculated at checkout.

Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD

Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.

Verify Your Fitment

See If This Product Fits Your Vehicle

This fits your vehicle!
( CHANGE VEHICLE )
Click here to find fitting parts.
This does not fit your vehicle.
( CHANGE VEHICLE )
Click here to find fitting parts.

Basco TE9881 Outer Tie Rod End (Left or Right): Toyota Hilux KUN25, KUN26, GGN25 & Hilux Surf 215

The outer tie rod end for the Toyota Hilux KUN25 4WD, KUN26 and GGN25 (2005 – 2015) and the Hilux Surf TRN210 / TRN215 / GRN215 (2004 – 2009). It joins the inner rack end to the steering knuckle, so it carries every steering input to the front wheel. Basco's reseller sells the same TE9881 for the left and the right, so one part number does either side.

In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.

At a glance

  • Suits: Toyota Hilux KUN25 4WD, KUN26 & GGN25 (2005 – 2015) and Hilux Surf 2.7L & 4.0L (2004 – 2009), see fitment
  • Position: outer tie rod end, fits left or right
  • Includes: tie rod end with nut and split pin, as pictured
  • Sold: individually. Order 2 for both sides
  • Change it: when it has play or knocks, or its boot is split (no fixed interval)
  • Brand: Basco, an Australian family-owned parts specialist

Key features

  • Fits either side: one part number for the left and right
  • Nut and split pin supplied: as pictured
  • Built to OE specifications: Basco says its steering parts are made to OE specifications as direct replacements, so no modification is needed

Specifications

Part number Basco TE9881
Position Outer, left or right
Quantity 1 tie rod end with nut and split pin

Fitment as published by Basco. Side as published by Basco's reseller for TE9881.

Vehicle fitment

Only the models below are listed: Basco's catalogue and a second Basco reseller both list this part for them. Years are model build years.

Model Body / series Engine Built
Toyota Hilux KUN25R 4WD 2 Door & 4 Door Ute 2.5L 2KD-FTV turbo diesel 2005 – 2015
Toyota Hilux KUN26R 2 Door & 4 Door Ute 3.0L 1KD-FTV turbo diesel 2005 – 2015
Toyota Hilux GGN25R 2 Door & 4 Door Ute 4.0L 1GR-FE V6 petrol 2005 – 2015
Toyota Hilux Surf TRN210R / TRN215R 4 Door SUV 2.7L 2TR-FE petrol 2004 – 2009
Toyota Hilux Surf GRN215R 4 Door SUV 4.0L 1GR-FE V6 petrol 2005 – 2009

Not listed for the 2WD Hilux KUN16 / TGN16, the Hilux TRD GGN25 supercharged, or the 2015 – on Hilux GUN. Basco's second source doesn't confirm those, so we haven't listed them. Give the HOOROO Crew a coo-ee to check.

Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.

What's in the box

  • 1 × Basco TE9881 outer tie rod end
  • 1 × nut
  • 1 × split pin

Sold individually. Replacing both sides? Add 2 to your cart.

When to replace

Tie rod ends don't have a fixed replacement interval. Have them checked at every service and replace one when it has play or knocks, or its boot is split and the grease has washed out.

Signs it's worn

  • Play or a clunk in the steering, especially over bumps or when turning
  • Wandering on the highway or the vehicle pulling to one side
  • Uneven wear on the inside or outside edge of the front tyres
  • A split tie rod end boot, or play in the joint when it's checked by hand

Fitting tips

  • Count the turns or measure the old tie rod end position so the toe is close when you reassemble.
  • Use a ball joint splitter to free the taper rather than hitting the knuckle arm hard.
  • Torque the castle nut to the figure in your workshop manual, then line up the next slot and fit a new split pin if your vehicle uses one. Don't back the nut off to line it up.
  • Get a wheel alignment after replacing a tie rod end.

Do the full job

Also in stock for the Hilux KUN / GGN:

Why Basco?

Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.

FAQs

Is this the left or the right?
Either. Basco's reseller sells the same TE9881 for the left and the right. Order 2 for both sides.

Is this the inner or the outer tie rod?
Outer. TE9881 is the outer tie rod end that bolts to the steering knuckle.

Does it fit the 2WD Hilux?
The 2WD KUN16 / TGN16 isn't confirmed by Basco's second source, so check with us first.

Do I need a wheel alignment?
Yes. Get one after replacing a tie rod end.

Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.

Warranty, shipping & returns

  • Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
  • Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
  • Free shipping: on orders over $160
  • 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.

Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.

You may also like