Basco WBH1670 Front Wheel Bearing Hub Assembly Pair (Left & Right, x2) - to suit Genesis G70 (2019 - On) & Kia Stinger (2017 - 2023)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Basco WBH1670 Front Wheel Bearing Hub Assembly Pair (x2): Genesis G70 & Kia Stinger
Both front wheel bearing and hub assemblies for the Genesis G70 (IK) and Kia Stinger (CK), with 2.0L turbo four or 3.3L twin-turbo V6, in one order. You get 2 × Basco WBH1670, one for the front left and one for the front right, so both sides are renewed together. Each is a complete bolt-in unit with the bearing, hub flange, wheel studs and ABS wheel speed sensor all in one. Only need one side? The single WBH1670 is also available.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Genesis G70 2.0T & 3.3T sedan (2019 – on), G70 Shooting Brake (2021 – on) and Kia Stinger CK 200S, 200Si, GT-Line, 330S, 330Si & GT (2017 – 2023), see fitment
- Position: front left and front right wheel hubs
- Includes: 2 × Basco WBH1670 (the same part fits either side)
- Change them: when a bearing hums, growls or has play, or an ABS sensor has failed (no fixed interval)
- Brand: Basco, an Australian family-owned parts specialist
Key features
- Both sides in one order: 2 hubs, so the front end is renewed evenly
- Made for the G70 and Stinger: Basco lists WBH1670 as the front wheel bearing hub for the Genesis G70 and Kia Stinger
- Complete hub assemblies: bearing, hub flange and 5 wheel studs in one sealed, pre-greased unit, ready to bolt in
- ABS sensor built in: integrated wheel speed sensor with a 2-pin plug on each hub
- Built to OE specifications: Basco says its parts are made to OE specifications as direct replacements, so no modification is needed
- Better value: $19.95 cheaper than buying two singles
Specifications
| Part number | Basco WBH1670 (× 2) |
| Position | Front, left or right |
| Type | Bolt-on hub and bearing assembly (sealed, pre-greased) |
| ABS sensor | Integrated, 2-pin plug |
| Wheel studs | 5, fitted |
| Quantity | 2 hub assemblies (1 pair) |
Specifications as published by Basco for WBH1670 and shown in the product photos.
Vehicle fitment
| Model | Body | Engine | Built |
|---|---|---|---|
| Genesis G70 2.0T (IK) | 4 Door Sedan | 2.0L turbo petrol I4 (G4KL) | 2019 – 2023 |
| Genesis G70 2.0T Shooting Brake (IK) | 4 Door Wagon | 2.0L turbo petrol I4 (G4KL) | 2021 – on |
| Genesis G70 3.3T (IK) | 4 Door Sedan | 3.3L twin-turbo petrol V6 (G6DP) | 2019 – on |
| Kia Stinger 200S, 200Si (CK) | 4 Door Liftback | 2.0L turbo petrol I4 (G4KL) | 2017 – 2023 |
| Kia Stinger 200S, 200Si, GT-Line (CK) | 4 Door Liftback | 2.0L turbo petrol I4 (G4KL) | 2017 – 2023 |
| Kia Stinger 330S, 330Si (CK) | 4 Door Liftback | 3.3L twin-turbo petrol V6 (G6DP) | 2017 – 2020 |
| Kia Stinger GT (CK) | 4 Door Liftback | 3.3L twin-turbo petrol V6 (G6DP) | 2017 – 2023 |
Suits the Genesis G70 sedan and Shooting Brake (IK) and the Kia Stinger (CK) with the 2.0L G4KL four-cylinder or the 3.3L G6DP V6, as listed by Basco. Doesn't suit the rear hubs, or Kia and Genesis models not listed above.
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
Part numbers
- Basco WBH1670: front wheel bearing hub assembly, left or right (also sold on its own)
What's in the box
- 2 × Basco WBH1670 front wheel bearing hub assembly, each with ABS sensor and wheel studs
When to replace
Wheel bearings don't have a fixed replacement interval. Have them checked at every service and replace the hub when the bearing is noisy, has play, or the built-in ABS sensor has failed. The hub is a sealed, pre-greased unit, so the bearing can't be repacked or adjusted. When one side has gone, the other side has done the same kilometres and is often close behind.
Signs they're worn
- A humming, growling or droning noise from the front that gets louder with speed, and often changes when you turn left or right
- Free play or a clunk when the front wheel is rocked top to bottom with the weight off it
- A grinding or rough feel when the wheel is spun by hand
- An ABS or traction control warning light, caused by a failed wheel speed sensor in the hub
- Vibration through the steering wheel or floor that wasn't there before
Fitting tips
- Do one side at a time.
- Support the vehicle on stands. Never work under a car on a jack alone.
- Unplug the hub's ABS sensor lead before you unbolt the hub, and check the wiring and plug for damage before you reconnect it.
- Clean any rust and scale off the knuckle face so the new hub sits flat. A hub that isn't seated square can be noisy and wear out early.
- Torque the hub bolts and the drive shaft or hub nut to the figures in your workshop manual. Don't use a rattle gun to final-torque them, and use a new hub nut where the manual calls for one.
- Check the brake rotor, pads and CV joint or drive shaft while it's apart.
- Clear any ABS warning lights and test drive the vehicle to confirm the ABS works and the noise has gone.
Do the full job
Also in stock for the Genesis G70 and Kia Stinger:
- Basco WBH1670 Front Wheel Bearing Hub Assembly (single)
- Basco WBH1671 Rear Wheel Bearing Hub Assembly (non-Brembo)
- Basco WBH1671 Rear Wheel Bearing Hub Assembly Pair (x2, non-Brembo)
Need brake pads, rotors or suspension parts for your G70 or Stinger? Send us your rego or VIN and we'll source them for you.
Why Basco?
Basco Wholesale is an independent, Australian family-owned automotive parts specialist, with warehouses in Victoria, Queensland and New South Wales. Basco is its own house brand of aftermarket parts, with broad vehicle coverage at a fair price.
FAQs
What's included?
Two Basco WBH1670 front wheel bearing hub assemblies, one for each front wheel.
Can I buy just one side?
Yes. The single WBH1670 is also sold separately.
Is it the left or the right hub?
Either. Basco WBH1670 fits the front left and the front right.
Does it include the ABS sensor?
Yes. The wheel speed (ABS) sensor is built into the back of the hub, with a 2-pin plug, as pictured.
Does it fit the Stinger GT and the G70 3.3T V6?
Yes. Basco lists it for the 3.3L G6DP V6 models (Stinger 330S, 330Si and GT, and the G70 3.3T) as well as the 2.0L G4KL turbo models.
Do I need a wheel alignment?
Not normally for a hub swap, but have it checked if any steering or suspension parts were disturbed.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Basco manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.