Bendix BS1793 Rear Brake Shoe Set (4 Shoes, 295 x 45 mm) - to suit Great Wall V200, V240, SA220 & Chevrolet Colorado X88 (2004 - 2016)
Order before 1pm AEST (Mon–Fri) for same-day dispatch from the Sunshine Coast, QLD
Australia Post: 2–6 business days standard, 1–3 business days Express. Free shipping on orders $160+.
Bendix BS1793 Rear Brake Shoe Set: Great Wall V200, V240, SA220 & Chevrolet Colorado X88 (2004 – 2016)
A full rear axle set of 4 Bendix brake shoes for 295 mm drums, to suit the Great Wall V200 and V240 K2 utes and cab chassis, the SA220 Super Luxury and the Chevrolet Colorado X88. The shoes press against the inside of the rear drums to slow the ute, and they also do the job of the handbrake. One box does both rear wheels.
In stock at our Sunshine Coast QLD warehouse. Order before 1pm and it's dispatched the same day.
At a glance
- Suits: Great Wall V200 K2 (2011 – 2016), V240 K2 (2009 – 2016), SA220 Super Luxury (2009 – 2013), also sold GWM-badged, and Chevrolet Colorado X88 (2004 – 2011), see fitment
- Position: rear axle, left and right (set of 4 shoes)
- Size: 295 mm drum diameter × 45 mm shoe width
- Change it: when the lining is worn thin or contaminated, or the handbrake keeps needing adjustment (no fixed interval)
- Brand: Bendix, one of Australia's best-known brake brands
Key features
- Full axle set: 4 shoes, enough to do both rear drums in one go
- Made for 295 mm drums: Bendix lists BS1793 for a 295 mm inner drum diameter with a 45 mm wide shoe
- Semi-metallic lining: Bendix's brake shoe range uses a semi-metallic formulation, which Bendix says is low in noise and dust and is shear tested for bonding strength
Specifications
| Part number | Bendix BS1793 |
| Barcode (EAN) | 9316068377529 |
| Position | Rear axle |
| Brake type | Drum brake |
| Inner drum diameter | 295 mm |
| Shoe width | 45 mm |
| Quantity | 4 shoes (one axle set) |
Specifications as published by Bendix for BS1793.
Vehicle fitment
| Model | Engine | Built |
|---|---|---|
| Chevrolet Colorado X88, single cab ute | 3.0L turbo diesel (4JJ1-TC) | 2004 – 2011 |
| Chevrolet Colorado X88, dual cab ute | 3.0L turbo diesel (4JJ1-TC) | 2004 – 2011 |
| Great Wall SA220 Super Luxury CC, dual cab ute (wellside) | 2.2L petrol (491QE) | 2009 – 2013 |
| Great Wall V200 K2, single cab chassis | 2.0L turbo diesel (GW4D20) | 2012 – 2016 |
| Great Wall V200 K2, dual cab chassis | 2.0L turbo diesel (GW4D20) | 2012 – 2016 |
| Great Wall V200 K2, dual cab ute (wellside) | 2.0L turbo diesel (GW4D20) | 2011 – 2016 |
| Great Wall V240 K2, single cab chassis | 2.4L petrol (4G69S4N) | 2010 – 2016 |
| Great Wall V240 K2, dual cab chassis | 2.4L petrol (4G69S4N) | 2010 – 2016 |
| Great Wall V240 Super Luxury K2, dual cab ute (wellside) | 2.4L petrol (4G69S4N) | 2009 – 2016 |
The supplier catalogue also lists the GWM-badged SA220 and V200. The Colorado listed is the Chevrolet-badged X88, not the Australian Holden Colorado. Some Holden Rodeo RA, Holden Colorado RC and Isuzu D-Max models also use a 295 mm rear drum, so if you have one, check with us before you buy. Doesn't suit the front brakes. It isn't listed for the Great Wall X200 / X240 SUVs or the newer GWM Cannon (2020 – on).
Not 100% sure? Send us your rego or VIN and we'll check it for you before you buy.
What's in the box
- 4 × Bendix BS1793 rear brake shoes (one axle set, both rear wheels)
Shoes only. Springs, adjusters and other fitting hardware aren't included.
When to replace
Brake shoes don't have a fixed replacement interval. Have them checked at every service and replace them when the lining is worn thin, contaminated with oil, grease or brake fluid, or the handbrake keeps needing adjustment. Utes that tow, carry heavy loads or work on dirt roads wear rear shoes faster. Always replace them as an axle set.
Signs they're worn
- The handbrake lever pulls up higher than it used to, or doesn't hold the ute on a hill
- A longer brake pedal, or the ute needs more pedal effort to pull up
- Grinding or scraping from the rear when braking
- The ute pulls or the rear locks up unevenly under braking, which can mean a contaminated shoe or a leaking wheel cylinder
Fitting tips
- Measure the drums against the maximum diameter cast into them, and machine or replace them if they're out of spec or scored.
- Check the wheel cylinders for leaks before fitting new shoes. A leaking cylinder will soak the new linings.
- Replace tired return springs and hold-down hardware, and clean and lightly grease the backing plate contact points.
- Note which way the leading and trailing shoes go before you strip the old ones, and do one side at a time so you've got the other side to copy.
- Adjust the shoes and the handbrake to your workshop manual setting, and bed the shoes in gently before heavy braking or towing.
Do the full job
Also in stock for the Great Wall V200 and V240:
- Basco WBK1570 Front Wheel Bearing Kit (V200, V240 & SA220)
- Basco DCB1018 Drive Shaft Centre Support Bearing (V200 & V240)
FAQs
Is this enough for both rear wheels?
Yes. BS1793 is a set of 4 shoes, two for each rear drum, so one box does the whole rear axle.
Does it fit the GWM-badged V200 or SA220?
Yes. The supplier catalogue lists the GWM-badged SA220 and V200 as well as the Great Wall-badged models.
Will it fit my Holden Colorado or Rodeo?
This listing covers the Chevrolet Colorado X88. Some Holden Rodeo RA and Colorado RC models use the same 295 mm rear drum, but check with us first. Send us your rego or VIN and we'll confirm it.
Does it include springs and hardware?
No, it's the 4 shoes only. Check your springs and adjusters while the drums are off and replace any that are tired.
Will a non-genuine part void my new-car warranty?
No, not on its own. The ACCC says you can have your car serviced or repaired by an independent mechanic using non-genuine parts, as long as the parts are fit for purpose. Keep your receipts.
Warranty, shipping & returns
- Manufacturer warranty: covered by the Bendix manufacturer warranty against manufacturing defects under normal use
- Same-day dispatch: order before 1pm, from our Sunshine Coast QLD warehouse
- Free shipping: on orders over $160
- 30-day returns: unused parts in original packaging can be returned within 30 days of purchase. You pay return shipping unless the item is faulty or was listed incorrectly. Change-of-mind returns attract a 10% restocking fee, as per our refund policy.
Confirm fitment before purchasing. Coo-ee the HOOROO Crew at sales@hoorooautomotiveparts.com.au or tap the AiMate live chat if unsure.